Lazerlamps CARBON-6 4-Way Rally Lamp Pod Instructions
- June 9, 2024
- LAZERLAMPS
Table of Contents
Lazerlamps CARBON-6 4-Way Rally Lamp Pod
Thank you for your purchase of the 3rd Generation of Carbon-6 High Performance LED Driving Lights. Along with all the team at Lazer, I hope you’re delighted with the performance and build quality of your new lights, and they deliver a safer and faster night driving experience. As always we value your feedback and would welcome you to leave a review on our website.
Ben Russell-Smith (Director – Lazer Lamps)
4-WAY BONNET POD ADJUSTMENT SETTINGS
HORIZONTAL ADJUSTMENT
FINE ADJUSTMENT
1 TURN = 0.83 DEGREES OF UP (ANTI-CLOCKWISE) OR DOWN (CLOCKWISE) ADJUSTMENT
VERTICAL ADJUSTMENT
ALSO AVAILABLE
AMBER AND BLACK LENS COVERS (INCLUDED WITH LAMP)
WIRING KITS
MOUNTING KITS
ELECTRICAL CONNECTION
CARBON-6 (GEN3) CONNECTOR
TW0-LAMP HARNESS KIT FOR CARBON-6 (GEN3)
ADD OPTIONAL MOMENTARY SWITCH – PIN4 – FOG MODE
If the hold time for the switch is ≤ 750ms then the beam pattern changes from
default mode to fog mode and is retained after the switch is released.
If the hold time for the switch is ≥ 750ms then the beam pattern changes from
default to fog but, the mode will not be retained after the switch is released
and it will revert to the previous state (default).
LAMP MODES
(CARBON-6 GEN3)
LAMP MODE|
INPUT SIGNAL
| BEAM PATTERNS| CURRENT @ 13.5V (A)
---|---|---|---
GREEN WIRE (E-MARK) CONNECTOR PIN 3| PURPLE WIRE (FOG) CONNECTOR PIN 4| HIGH
BEAM % LUMEN OUTPUT| FOG BEAM % LUMEN OUTPUT
E-BOOST| 0V| 0V| 100| 0| 6.5
E-MARK| 12V| 0V| 25| 0| 1.625
FOG| 0V| 12V| 0| 100| 6.5
RAIN| 12V| 12V| 0| 25| 1.625
PWM INFORMATION
(CARBON-6 GEN3)
Some race teams may wish to activate the different modes of these lamps by using a PWM signal. PIN 3 is PWM capable, so race teams should use a 100Hz PWM frequency, in order to obtain different beam patterns. See table.
PWM SIGNAL REQUIREMENTS
PWM SIGNAL FREQUENCY| 100 Hz
TOLERANCE DUTY CYCLE| ±2%
AVAILABLE PWM MODES| INPUT SIGNAL| LIGHT OUTPUT| CURRENT @ 13.5V
(A)
---|---|---|---
12V PWM SIGNAL ON PIN 3 (E-MARK PIN) DUTY CYCLE %| VOLTAGE ON PIN 4 (FOG
PIN)| PRIMARY BEAM % LUMEN OUTPUT| SECONDARY BEAM % LUMEN OUTPUT
0| 0V| 100| 0| 6.5
10| 0V| 90| 0| 1.6
18| 0V| 80| 0| 2.6
26| 0V| 70| 0| 3.6
34| 0V| 70| 30| 4.6
42| 0V| 70| 40| 7.2
50| 0V| 60| 60| 9.1
58| 0V| 40| 70| 9.1
66| 0V| 30| 70| 9.1
74| 0V| 0| 80| 9.1
82| 0V| 0| 90| 9.1
90| 0V| 0| 100| 8.1
100| 0V| 25| 0| 1.6
0| 12V| 0| 100| 6.5
10| 12V| 0| 95| 6.2
18| 12V| 0| 90| 5.9
26| 12V| 0| 85| 5.5
34| 12V| 0| 80| 5.2
42| 12V| 0| 75| 4.9
50| 12V| 0| 70| 4.6
58| 12V| 0| 65| 4.2
66| 12V| 0| 60| 3.9
74| 12V| 0| 55| 3.6
82| 12V| 0| 50| 3.3
90| 12V| 0| 45| 2.9
100| 12V| 0| 25| 1.6
CUSTOMER SUPPORT
T +44 (0) 1992 677374
E sales@lazerlamps.com
Lazer Lamps Ltd, Units 1-2, Harlow Mill Business Centre
Riverway, Harlow, Essex CM20 2FD, United Kingdom
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>