Schneider CCT501901 Electric Wiser Smart Home System Instruction Manual

June 6, 2024
Schneider

Schneider CCT501901 Electric Wiser Smart Home System

Prerequisites
Download the Wiser by SE app to your smartphone.

About this product
The Wiser Gateway (hereinafter known as Gateway) is a communication interface that can be connected to all your Wiser Zigbee devices, enabling you to easily manage your home environment.

Functions

  • Monitors and controls Wiser Zigbee devices through the mobile app, Ethernet or Wi-Fi®.
  • Create Moments or Automations to operate Wiser Zigbee devices through the mobile app.

Package contents

  • A Wiser Gateway
  • B Metal bracket
  • C Screws: 2 × ST4.2 × 25 mm with wall plug
  • D AC adaptor
  • E AC adaptor USB cable
  • F Ethernet cable
  • G Reset pin
  • H Installation instructions
  • I Hand over card

The right angle ethernet cable is not included in the package, it must be procured separately.

Schneider-CCT501901-Electric-Wiser-Smart-Home-System-fig
1

Operating elements

  • J Reset button
  • K Power button
  • L Ethernet LED
  • M Wi-Fi® LED
  • N Zigbee LED
  • O Ethernet port
  • P Terminals for power supply (12 VDC)
  • Q Micro USB port for the AC adaptor

Schneider-CCT501901-Electric-Wiser-Smart-Home-System-fig
2

Choose suitable location to install

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Safe electrical installation must be carried out only by skilled professionals. Skilled professionals must prove profound knowledge in the following areas:

  •  Connecting to installation networks
  •  Connecting several electrical devices
  •  Laying electric cables
  •  Safety standards, local wiring rules and regulations

Failure to follow these instructions will result in death or serious injury.

NOTICE

EQUIPMENT DAMAGE

  • If the Gateway is powered through the micro USB port, use the provided AC adaptor only.
  •  If the Gateway is powered on through the termi-nals, use a suitable 12 VDC power supply only.

Failure to follow these instructions can result in equipment damage.

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Make sure that the 12 VDC power supply is turned Off before making connections to the gateway.
Failure to follow these instructions will result in death or serious injury.

a. Wall box

  • Use a standard wall box for the installation.
  • Use a right angle ethernet cable when installing the Gateway on a wall box.
  • It is recommended to use a 12 VDC external power supply to power the Gateway.
  • The ethernet cable and power cable must be pre-wired in the wall box.
  •  The metal bracket must not be fixed with claws or nails. It should be mounted on the wall box using screws to prevent the Gateway from falling.

Schneider-CCT501901-Electric-Wiser-Smart-Home-System-fig
3

b Wall

It is recommended to use the supplied AC adaptor to power the Gateway.

c. Table

  • Use the tablestand for Wiser Gateway CCT501400_0001 when placing the Gateway on a table.
  • It is recommended to use the supplied AC adaptor to power the Gateway.

Schneider-CCT501901-Electric-Wiser-Smart-Home-System-fig
4

Read full system user guide online

Scan the QR code to access the Wiser – System User Guide and choose your language to refer complete information about the device, including operation, configuration and using the system.

Schneider-CCT501901-Electric-Wiser-Smart-Home-System-fig
5

Technical data

AC power adaptor Model number: KA0601A-0501000DEU

Input: 100-240 VAC, 50/60 Hz
Output: 5.0 VDC, 1.0 A, 5.0 W
Average active efficiency:

73.7% @115 VAC, 230 VAC

No-load power consumption:

0.1 W @115 VAC, 230 VAC

Power supply| 5 VDC/1.0 A AC power adap- tor through micro USB port
12 VDC/0.5 A power supply through 2-pin terminal block (not included in the package)
Connector type| Micro USB port for the AC adaptor
2-pin terminal block cable type:

0.25 mm2 to 1.50 mm2

Communication interface| Ethernet: IEEE802.3, 10/100 base-T (LAN)
Wi-Fi®: 2.4 GHz,

IEEE802.11 b/g/n

Zigbee: 2.4 GHz, IEEE802.15.4
Operating frequency| 2405 – 2480 MHz (Zigbee)

2412 – 2472 MHz (Wi-Fi®)

Max. radio frequency power transmitted| <10 mW (Zigbee)

<67 mW (Wi-Fi®)

System clock| RTC function with coin battery (CR1220)
IP rating| IP20
Operating temperature| 0 °C to 40 °C, indoor use only
Relative humidity| 10 % to 90 %, non-condensing
Dimensions (H × W × D)| 86 × 86 × 34 mm
Communication protocol| Zigbee 3.0 certified

Trademarks

  • Wiser™ is a trademark and the property of Schneider Electric SE, its subsidiaries and affiliated companies.
  • Zigbee® is a registered trademark of the Connectivity Standards Alliance.
  • Apple® and App Store® are brand names or registered trademarks of Apple Inc.
  • Google Play™ Store and Android™ are brand names or registered trademarks of Google Inc.
  • Wi-Fi® is registered trademark of Wi-Fi Alliance®.

Other brands and registered trademarks are properties of their relevant owners.

EU Declaration of Conformity

Hereby, Schneider Electric Industries, declares that this product is in compliance with the essential requirements and other relevant provisions of RADIO EQUIPMENT DIRECTIVE 2014/53/EU. Declaration of conformity can be downloaded on: se.com/docs.

Schneider Electric Industries SAS
If you have technical questions, please contact the Customer Care Centre in your country.se.com/contact

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Schneider User Manuals

Related Manuals