Laview L8 WiFi Smart Light Bulb User Manual
- June 4, 2024
- LaView
Table of Contents
Laview L8 WiFi Smart Light Bulb
IMPORTANT SAFETY GUIDELINES
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DEFINITIONS: SAFETY ALERT SYMBOLS AND WORDS
This instruction manual uses the following safety alert symbols and words to
alert you to hazardous situations and your risk of personal injury or property
damage.
DANGER: a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could resut in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,if not
avoided, may result in minor or moderate injury
NOTICE: Indicates a practice not related to personal injury which, if not
avoided, may result in property damage
WHAT’S IN THE BOX
TIPS
- For safety, always turn off your power breaker before installation.
- For indoor use only
- Whenever you change the Wi-Fi network, re-connection is required.
PRODUCT OVERVIEW
8 Smart Light Bulb:
Light Status
- White Light blinks rapidly for 10 times then turns solid (abouttwice per second)
- White Light blinks slowly for 3 times then turns solid (about once in every 5 seconds)
- L8 Smart Light Bulb is in EZ mode and wait for pairing
- L8 Smart Light Bulb is in AP mode and wait for pairing
Light Switch Operation:
- Switch to EZ/AP pairing mode & Reset device
- Exit pairing mode
- Power cycle ( turn on and off repeatedly) L8 Smart
- Light Bulb for 4 times.
No operation for 10 minutes
NOTE: If the device fails to get online during the setup process, turn on and off the L8 Light Bulb once and it will enter pairing mode again.
SET UP L8 Light Bulb
Download The LaView APP
-
Download and install LaView APP. LaView APP is available for both i0S and Android OS. Search the name LaView in App Store or Google Play. (The other LaView APPs, such as LaView Connect, LaView ONE, LaView Life do not support L8 Smart Light Bulb)
-
Complete the app registration process.
TIPS:
Download the LaView APP now by scanning the QR Code below: -
Connect your phone to a 24 GHz Wi-Fi network.
Install L8 Light Bulb
- Shut the power off at the power breaker before installation. If you don’t know where your power breaker is or how to turn off the power, consult with a licensed electrician.
- Screw the light bulb into a A19 light bulb socket.
- Turn on the power at your pOwer breaker.
- Turn on L8 Smart Light Bulb, it should be blinking rapidly (about twice per second) for EZ paring mode now.
Connect L8 Light Bulb to LaView APP
TIPS If your are setting up the light bulb for the first time, the LaView APP will send a binding request for setting it up, follow the in-APP instruction to finish the setup process.
Option 1
Connect the L8 Smart Light Bulb with Auto Scan Feature
- Open the LaView APP. Click on the blue plus icon (on the top right corner in ‘Home) or Add Device
- Select Auto Scan.
- The Auto Scan feature will scan your local network for searching devices. You will also need to have a 2.4 GHz Wi-Fi network selected and Bluetooth enabled.
- Tap Next and select L8 Smart Light Bulb icon, then follow up the in-APP instructions to finish the setup process.
Option 2
Connect SP3 Smart Plug Manually on EZ Mode
- Ensure the white light is blinking rapidly ( about twice per second ), if not, power cycle ( turn on and off repeatedly) L8 Smart Light Bulb for 4 times to shift the pairing mode. If the white light stays solid and you are not sure about the pairing mode, please turn off and on the light bulb once and check out the blinking light status. )
- Select L8 Smart Light’ in ‘Smart Home Essentials.
- Select a 2.4 GHz Wi-Fi Network and input the Wi-Fi password.
- Follow up the in-app instructions and finish setup process.
BASIC FUNCTIONS
Remotely control your L8 Smart Light Bulb in LaView APP anywhere in the world, at any time of the day.
- Static Light Dimmer
- Scene DIY
- Light Schedule
ALEXA SET UP (Optional)
BERORE YOU START
- Download and install Amazon Alexa APP on your phone
- Log in the Alexa APP with your Amazon account
- Set up your Alexa device
- Ensure your L8 Smart Light Bulb is powered on and online in the LaView APP
In the Laiew APP, go to the L8 Smart Light Bulb menu, and tap the Edit’ button to enter the setting menu.
Tap the smart plug name to edit it.
Edit the light bulb name to one that is easy to pronounce such as Kitchen Light, Bedroom Light, Baby Room Light’ etc.
Tap the Menu icon and choose Skills & Games in the Alexa APP
Search ‘LaView’ and choose the LaView’skill(Not Laview ONE)
Tap ENABLE TO USE
Log in to your LaView APP account and tap Link Now’
Tap Authorize’
Tap Done’ after the LaView APP is linked to the LaView Skill
Tap DISCOVER DEVICES
Wait until the Alexa APP discovers the L8 Smart Light Bulb. Check the following if Alexa repeatedly fails to discover the smart light bulb.
-
Ensure the L8 Smart Light Bulb, the Alexa device and
your phone are connected in the SAME Wi-Fi network. -
Ensure the L8 Smart Light Bulb is powered on and set
up in the LaView APP. -
Ensure the Alexa device, such as Echo Show, is set up
and connected. -
Ensure the L8 Smart Light Bulb is added to the LaView account that is linked to the LaView Skill in the Alexa APP.
You can now tell your voice assistant to remote control the L8 Smart Light Bulb by calling
- Alexa, turn on/off the Kitchen Light.
- Alexa, change the Kitchen Light to red.
- Alexa, change the brightness of Kitchen Light to 50%.
You can also change and update the smart plug name in the LaView APP smart plug menu. (Refer to Step 3)
SPECIFICATION
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, thereis no guarantee that interference will not ocur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealeror anexperiencedradio/ TV help
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
CUSTOMER SERVICE
We are dedicated to providing our customers with better user experience and customer service. If anything concerns you, please reach us by the contacts as below
LIVE CHAT:
In LaView APP
Email: info@laviewusa.com
Our professional techinicians are commited to reply all your requests within
24 hours
If you purchased from Amazon, you can also Contact our professional customer service team in your Amazon account
PRODUCT WARRANTY CARD
Your LaView product is protected by a 1-year warranty from the purchase date.
For more information on repairs, exchange, and other policies, please visit:
www.laviewusa.com
Please send all inquiries through the Contact Form on our website, or email us
at info@laviewusa.com.
And our technicians would be glad to assist you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>