LaView N11 Battery Security Camera Outdoor User Manual

USER MANUAL
W’HA WIRE- FREE
SECURITY CAMERA

• Blinking Red Light: awaiting WiFi connection, or currently
connecting ( faster blinking)
+ Solid Blue Light: camera running correctly
Microphone| Capture sound for your video
SD card slot| Support local SD Card storage (Max128G)
Reset| Press and hold on for 5 seconds to reset the camera
Charging indicator| • Solid Red Light: the battery is charging
• Solid Blue Light: charging complete

WHAT’S IN THE BOX

PLEASE CONSULT THIS CHECKLIST FOR ALL PARTS.

APP SET UP

For step-by-step Mobile APP setup instructions, please read the Quick Start Guide included in the package or check out our Youtube tutorials

DOWNLOAD AND INSTALL THE APP
LaView App is available for both iOS and Android OS. Search the name LaView, in App Store or Google Play ( The other LaView apps, such as LaView Connect, LaView ONE, and LaView Life do NOT support the N11 camera)

Please download the LaView App from the App Store or Scan the QR Code below

http://app.appurl.me/79818229623

1. MAKE SURE YOUR PHONE IS CONNECTED TO A 2.4GHZ WIFI NETWORK
2. COMPLETE THE APP REGISTRATION PROCESS
3. FOLLOW THE IN-APP INSTRUCTION TO PAIR THE CAMERA

• Click on the ‘+’ sign to add the camera. Continue to dick “Video Surveillance” >> Smart Camera”

• Power On the camera by pressing the Power Button(If you are not setting up the camera for the very first time, press the Reset button instead for S seconds until you hear a beep.)
  

• Wait until the LED indicator is flashing rapidly, which means the camera is ready for pairing

• Enter the WiFi Password to generate a QR code that carries your WiFi information’

• Use the camera to scan the QR code on the phone
  (keep the camera 6-8 inches away from the phone)
  

• Press I Heard a Prompt’ after the camera receives the QR code and beeps. The camera will start pairing

• When connecting, you should make sure your router, mobile phone, and camera are as dose as possible

• Wait until the camera is connected online

• Customize the camera name to differentiate cameras in different locations and finish and paring process

• If the pairing is not successful, press the Reset button for S seconds until you hear a beep and start again. Or check the FAQ section for more troubleshooting steps

INSTALLATION

After the camera is set up, check the battery status in the LaView APP
Ensure the battery is fully charged before mounting the camera

FIND A GOOD MOUNTING SPOT

• Use the Wii Signal Indicator **Signl:98%** in the APP live view screen to test the WiFi signal strength. Move the camera as close to the router as possible if the WiFi signal is poor
• Hang the N11 6-10ft (2-3m) above the ground for maximum detection range and accuracy Avoid direct sunlight to the N11.

• MOUNTING THE CAMERA WITH A MAGNETIC BRACKET ( EASIER INSTALLATION )

1. Fix the bracket on the wall with included screws
2. Attach the camera to the bracket

• MOUNTING THE CAME RE WITH FIXED BRACKET (RECOMMENDED FOR THEFT PREVENTION)

1. Fix the bracket on the wall with included screws
2. Turn the nut and fix the bracket

TROUBLESHOOTING

• IF YOU CAN NOT CONNECT THE CAMERA TO THE INTERNET, CHECK THE FOLLOWING STEPS

• Ensure you are connecting to a 2.4GHz WIFI not GHz
  

• Ensure WiFi password or SSID is correct

• Ensure the camera is placed as close to the router as possible

• Ensure the camera is powered on and the indicator is blinking rapidly before scanning the QR code

• Charge the camera for some time to ensure the battery is not completely out

• Ensure you are using the correct APP (LaView)

• Ensure the camera is scanning the QR code on the phone in the correct way

• If the above steps don’t help, reset the camera and start pairing again

• WHAT CAN I DO IF THE CAMERA STOPPED WORKING?

• Close the APP and Restart the APP again
• Check if the WIFl password or router is changed. If so please reset the camera
• Ensure the router is powered on and online
• Ensure the camera has power
• Ensure the phone has decent network bandwidth
• Check the app is on the latest version

CHARGING CAMERA

Use the included micro USB cable to connect the N11 to the included US8 charger. Charging time may be longer if you use a universal US8 charger and cable.

• Ensure the camera is fully charged before you mount it to the bracket
• To charge the battery, unplug the camera from the bracket and connect it to the induced US8 charger via the US8 cable
• Due to the large battery capacity, it could take up to 12-14 hours to fully charge the battery
• The LED indicator will tum to Blue when the camera is fully charged
• You can check the battery level in the LaView APP
• Maximum battery life for each charge varies based on the actual environment and scenario

HUMAN AND MOTION DETECTION

• HOW TO TURN ON ANO OFF MOTION DETECTION?

• To tum on or off motion detection and Human detection setting, go to the camera menu and dick on Detection Alarm Settings

• WHAT CAN I DO IF I CAN NOT RECEIVE NOTIFICATIONS?

• LaView camera uses the advance D Al Humanoid Analysis technology that only sends notifications when a human is detected
• Ensure your phone notification setting is enabled for LaView App
• Ensure the phone has decent network bandwidth
• Ensure the camera is online

WHAT CAN I DO IF I RECEIVE TOO MANY NOTIFICATIONS?

• Ensure the Human Al detection fitter is enabled
• If the camera is placed at a location with large traffic, we recommend to relocate it to a place with less traffic to receive less alerts and extend battery life
• Objects with human body shapes such as stuffed toys may be detected as human and trigger the alerts, remove those if they constantly show up in the camera

OTHERS

• WHAT CANIDO IF THE IMAGE IS NOT CLEAR?

• The camera is equipped with a 1080p Full HD lens and sensor to produce a superior image, however, the image quality may be affected by the lighting condition
• Ensure the camera is NOT facing to the environment with poor lighting conditions or with extremely high contrast. Ensure it is NOT facing directly to bright Lighting sources such as sun Light
• Ensure your phone and your router has enough bandwidth to stream HD video. A minimum of 2MBps is required to stream each 1080p camera. If the network does not meet this requirement, the live view stream will be downgraded to SD automatically

• NIGHT VISION

• The camera is equipped with Infrared LED technology to capture black and white night vision images in detail at night. However, the night vision image quality may be affected by the following factor.
• There are high contrast light sources such as car headlights pointing to the camera

• WATERPROOF AND OUTDOOR USE

• The camera is IP65 rated for totally dust tight and protection against low-pressure jets of directed water from any angle. The camera can operate between 4F – 122 F for all-weather use. We recommend placing the camera under the eave and avoiding heavy rain or snow to maximize the camera life span
• For more technical questions or tutorials such as Alexa setup, Cloud Storage setting, please follow the in-APP tutorial section in the LaView APP or visit our Youtube  tutorials
• We proudly offer a manufacture 1-year warranty on all LaView products
• If you wish to return a product within the return period, please message us directly in your Amazon account or on our website

FCC COMPLIANCE

This device complies with Part 15 of the Ke gutes. Operation is subject to the following two conditions 1-this device nary Dot cause harmful interference, 2- this device must accept any interference received, including interference that may cause undesired operation
The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15of the KC Ruley These limits are designed to provide reasonably protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio  frequency energy and, if not installed and used in accordance with the instructions, nary cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio Or television reception, which can be determined by  turning the equipment off and on, the user ls encouraged to try to correct the interference by one Or ore of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver ls connected
• Consult the dealer or an experienced radio/TV technician for help

RF warning statement
To maintain compliance with Keg RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your the body which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the reeving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a or cut different from tat to which the receiver is connected
• Consult the dealer or an experienced tardive technician for help

RF warning statement
maintain compliance with R RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 0m between the radiator and your boy

CUSTOMER SERVICE

**** TEL: 626-566-7550
Monday-Friday Hours: 9.00 AM-6.00 PM PST
Email: info@laviewusa.com
Our professional technicians are committed to reply all your requests within 24 hours
If you purchased from Amazon, you can also contact our professional customer service team in your Amazon account

PARAMETER

Camera

Image sensor| 1/29™ Processive Scan CMOS
IR Distance| 33ft
Lens| 3.2mm FON 130
Day & night| IR Cut Filter with auto switch
System
Processor| Hiah-Performance Embedded SOC Processor
Wireless| Built-in 2.4G Wi-Fi
Audio
Input| Built-in Omni-direction microohone
Output| Built-in loudspeaker
Video
Compression Standard| H.264
Max. Resolution| 1920 + 1080
Frame Rate| 1-25fps adaptive frame rate of network transmission
WDR| DwDR
Interface
Cloud Storaae| Laview Cloud Storaae
Interface
Local Storaae| Micro SD Card Max. 128G
PIR| PIR Motion Sensor
General
Operating conditions| -4°F-122 °F(-20°C – 50°C )humidity 95% or less (non- condensing)
Power Supply| 9000mAh Rechargeable Lithium Battery an4 5p¢
Power Consumption| Max. 5W
Inaress  Protection| IP65
Dimensions| 2.24″ ×245″ ×3.93″ 57× 62.3x 99.9mm
Weight| 11.3oz( 320g)

PRODUCT WARRANTY CARD
You LaView product is by a 1-year warranty from the
purchase date. For more information on repairs, exchanges,
and other policies, please visit www.laviewsecurity.com.
Please send all inquiries through the Contact From on our
website, or email us at info@lav.iewusa.com And our
technicians would be glad to assist you.
To register your product, please visit :
www.laviewsecurity.com/product-registration

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>