LaView DB5 Doorbell Camera User Guide
- June 5, 2024
- LaView
Table of Contents
LaView -DB5- Doorbell- Camera -FEATURED
What’s in the box
Description
- Power Port AC 12V~24V
- Doorbell button Press the button to activate the doorbell
- Status light
- Red light solids on: the camera or network is abnormal
- Red light blinking: awaiting WiFi connection, or currently connecting (faster blinking)
- Blue light solids on: camera running correctly
- Microphone
- Captures sound for your video
- SD card slot
- Supports local SD Card storage (Max.128G)
- RESET
- Press and hold on for 5 seconds with pin to reset the doorbell (unable to unbind the bell from account)
Installation
Mode 1 Doorbell General Installation
Mode 2 Angle Wall Mount + bracket + doorbell installation
Connect
Download
LaView App is available for both iOS and Android OS. Search the name ‘LaView’,
in App Store or Google Play. (The other LaView apps, such as LaView Connect,
LaView ONE, LaView Life do NOT support DB5 Doorbell cameras)
Set up router
This device only supports 2.4GHz frequency band router, does not support 5GHz
frequency band router, please set the relevant parameters of the router before
WiFi configuration, WiFi passwords do not include special characters such as
~!@#$%^&*(). When the device is configured in WiFi, the mobile phone and
device are as close as to the router, which can speed up the configuration of
the device.
Set up Mobile App
Registration process
Step 1 Open the LaView App, click “Register”, read the “Privacy Policy” and
click “Agree” . 
Step 2 input a legal and valid Mobile number or Email address and click
“Continue”. Input Verification Code, then log in the app.
Set up Mobile App
- Open the LaView App, click “Create family”, and you can customize the Family name and related settings .
- Continue to click “Security & Sensor” >> “Smart Camera”,and then choose “Add Device” or “+”,ready to add camera.
- In “Add Device” this interface,continue to click “next step”,and then you should input your WiFi’s passwords.
Note:
- Camera only supports 2.4GHz WiFi network.
- The number of bits in the ssid and passwords of the router should not exceed 24 digits.
Scan QR Code
- In this interface,you should scan the QR code in your phone with the camera,when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
- When connecting,you should make sure your router,mobile,and camera are as close as possible.When camera is added successffully, you may customize the name of the camera in the App interface
Configure Camera
In “Smart Camera” interface,click ” “,you can set the camera common functions.
Functions
Full-duplex audio
When the visitor push the doorbell button, you will get a call. You can see
and hear the vistor in your App from the doorbell if you answer.
Shared device
The doorbell device can be shared with friends, and friends can also preview
online. There is no limit to the number of sharing devices, but only 6
accounts are supported for online preview at the same time.
Motion detection
Motion sensors will notify you when movement is detected. Record Record every
moment using high capacity SD card storage.
Day & Night
Powerful night vision means no interruptions, even in complete
darkness.
FAQ
In the network process, the process bar is always not 100%, add failure?
A: This camera only supports 2.4GHz WiFi router, please make sure you are
using a 2.4GHz WiFi router.And confirm the WiFi password again.
Q: Repeated additions are failures?
A: After adding a failure, it is recommended to restart the device or power
off, and then try to add again.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened;Message notification and authority
confirmation in the mobile phone system have been opened.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the
SD card is normally available and the format is FAT32. And the TF card can’t
be identified when the internet environment is not good.