TELTONIKA RUT300 Industrial Ethernet Router User Guide
- June 4, 2024
- teltonika
Table of Contents
RUT300 Industrial Ethernet Router
User Guide
WIKI Knowledge base
https://wiki.teltonika-networks.com/
POWER SOCKET PINOUT
I/O (PIN 3 and 4): Configurable digital Input/Output pins. Open collector output, max output 30 V, 300 mA, or Digital input where 0-6 V detected as a logic low and 8-30 V logic high.
HARDWARE INSTALLATION
- Connect the power adapter to the socket on the back of the device. Then plug the other end of the power adapter into a power outlet.
- Connect to the device via an Ethernet cable connected to the LAN port.
LOGIN TO DEVICE
- To enter the router’s Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.
- Use login information shown in image A when prompted for authentication.
- After you log in, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is mandatory and you will not be able to interact with the router’s WebUI before you change the password.
- When you change the router’s password, the Configuration Wizard will start. The Configuration Wizard is a tool used to set up some of the router’s main operating parameters.
TECHNICAL INFORMATION
| Bundled accessories specifications* | Bundled accessories specifications* |
|---|---|
| Power adapter | Input: 0.4 A@100-240 VAC Output: 9 VDC, 1 A, 4-pin plug |
*Order code dependent.
SAFETY INFORMATION
RUT300 router must be used in compliance with any and all applicable national
and international laws and with any special restrictions regulating the
utilization of the communication module in prescribed applications and
environments.
Hereby, TELTONIKA NETWORKS declares that this RUT300 is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following Internet address: https://wiki.teltonika-
networks.com/view/RUT300_CE/RED
Instruction Manual: Connect the power adapter to turn on the device. Open
192.168.1.1 in your web browser to configure it. More information on
https://wiki.teltonika-networks.com/
This sign means that all used electronic and electric equipment should not be
mixed with general household waste.
**** This sign means that the product meets the requirements of the
applicable EU directives.
www.teltonika-networks.com
2021 Teltonika Networks
References
- Amazone service client telephone tel contacter contact Amazon
- Teltonika Networks - LTE Routers, Gateways & Modems for IoT
- wiki.teltonika-networks.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>