AIGOSTAR T8 LED Tube User Manual
- June 9, 2024
- aigostar
Table of Contents
AIGOSTAR T8 LED Tube
Please take the time to read this user manual. This contains important information and notes on the installation and operation.
IMPORTANT!
- LED TUBE IS NOT DIM MABLE.
- ALWAYS SWITCH OFF THE POWER SUPPLY BEFORE COMMENCING WORK
- ONLY APPLICABLE FOR USING INDOOR DRY USAGE ENVIRONMENT, OUTDOOR APPLICATIONS REQUIRE AN IP RATED FIXTURES.
- DO NOT CHANGE THE STRUCTURE OR ANY COMPONENTS OF THE LED TUBE TO ENSURE SAFETY.
- PLEASE KEEP THIS USER MANUAL FOR FUTURE SYSTEM MAINTENANCE.
- LED TUBE IS DESIGNED FOR FITTING THE STANDARD I EC COMPLIANT G13 Bl-PIN LAMP-HOLDERS.
- PLEASE READ THE INSTALLATION INSTRUCTIONS CAREFULLY AND FOLLOW THE WIRING INSTRUCTIONS TO ENSURE SAFETY.
- LED TUBE MUST BE INSTALLED BY A PROFESSIONAL ELECTRICIAN IN ACCORDANCE WITH THE RELEVANT ELECTRICAL CODES.
Disclaimer:
LED tube disclaims liability for any direct, indirect or incidental damages in
case of installation performed either not according to this guide or not
performed by a professional electrician.
New Built System Wiring Guide
Retrofit EM Ballast Based System Wiring Guide
Retrofit EM Ballast Based System Wiring Guide
- Remove the existing electronic ballast as shown below.
- Connect the wire from lamp-holder pin 2 to lamp-holder pin 3.
- Connect the lamp-holder pin 1 to L (Live) and lamp-holder pin 4to N (Neutral).
ABOUT COMPANY
- ITA LIA MARKET SR L
- VIA DEL LE INDUS TRIE, 9/ 1 20883 MEZZA GO(MB), ITALIA
- http://www.aigostar.com
- MA DEINP.R.C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>