StarTech com KEYBOARD-TRAY-CLAMP1 Desk Clamp Keyboard Tray User Guide
- June 9, 2024
- StarTech com
Table of Contents
KEYBOARD-TRAY-CLAMP1 Desk Clamp Keyboard Tray
User Guide
Product Diagram (KEYBOARD-TRAY-CLAMP1)
| Component| Function
---|---|---
1| Desk Clamp, Left| • Attach the Keyboard Tray to the Desk
2| Keyboard Tray| • Place a keyboard and a mouse on the Keyboard Tray
3| Desk Clamp, Right| • Attach the Keyboard Tray to the Desk
4| Clamp Knob| • Turn by hand to secure the Clamp to the Desk
5| Height Adjustment L Bracket| • Adjust the height between the Desk and the
Keyboard Tray
• Attach the Keyboard Tray to the Desk Clamp
Package Contents
- Keyboard Tray x 1
- Height Adjustment Screws x 5
- Tray Mounting Screws x 5
- Height Adjustments L Brackets x 2
- Desk Clamp Left x 1
- Desk Clamp Right x 1
- Quick-star Guide x1
Requirements
For the latest manuals, product information, technical specifications, and
declarations of conformance, please visit: www.startech.com/KEYBOARD-TRAY-
CLAMP1
- Phillips Head Screwdriver
Installation
WARNING!
Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage. This product can support the
following weight: up to 11.8 kg (26 lbs).
Ensure the mounted Keyboard Tray is properly secured to the Desk before use.
Attach the Desk Clamp to the Height Adjustment L Brackets
- Determine the desired height between the Desk and the Keyboard Tray: 100, 120, or 140 mm (3.9, 4.7, or 5.5 in). Each row of holes on the Height Adjustment L Bracket are spaced 20 mm apart. The row of holes, located closest to the bend of the Height Adjustment L Brackets, provides the minimum height adjustment setting of 100 mm (3.9 in).
- Secure the Height Adjustment L Bracket to the Desk Clamps using the Height Adjustment Screws (x2 shorter screws) and tighten using a Phillips Head Screwdriver to complete the first Desk Clamp Assembly (Figure 1).
- Repeat steps 2 and 3 to install the second Desk Clamp Assembly
Attach the Desk Clamp Assemblies to the Keyboard Tray
-
Flip the Keyboard Tray upside down and align the mounting holes located on either side of the Keyboard Tray with the bottom of the Desk Clamp Assembly.
(Figure 2). -
Secure the Desk Clamp Assembly to the Keyboard Tray using the Tray Mounting Screws (x2) and tighten using a Phillips Head Screwdriver.
-
Repeat steps 2 and 3 to attach the second Desk Clamp Assembly. This completes the Keyboard Tray Assembly.
Attach the Keyboard Tray Assembly to the Desk
- Open the Desk Clamps rotating the Clamp Knobs counterclockwise. The Desk Clamps can accommodate Desks measuring up to 59 mm (2.3 in) thick.
- Slide the Desk Clamps over the edge of the Desk.
- Tighten the Desk Clamps by rotating the Clamp Knobs clockwise.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references are
for illustrative purposes only and do not represent an endorsement of a
product or service by StarTech.com, or an endorsement of the product(s) to
which this manual applies by the third-party company in question. StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.
Warranty Information
This product is backed by a 2-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
---|---|---|---
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>