Westfalia WEH110 1200 W Electric Planer Instruction Manual

: June 9, 2024
: Westfalia

Table of Contents

Introduction
Overview
Assembly
Adjust Depth Of Cut
Connecting The Dust Bag
Plane
Exchange Planer Blades
TECHNICAL DATA
SAFETY NOTES
EC DECLARATION OF CONFORMITY
CUSTOMER SERVICES
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Westfalia WEH110 1200 W Electric Planer

Introduction

Dear Customers,
Instruction manuals provide valuable hints for using your new device. They enable you to use all functions, and they help you avoid misunderstandings and prevent damage. Please take the time to read this manual carefully and keep it for future reference.

Overview

Rotary switch for plane depth setting
Planning debris opening
Handle
Safety lock-out
On/off switch
Ventilation openings
Belt cover
Clamping screws for blades
Planning blade
Blade shaft
V-groove

Assembly

Adjust Depth Of Cut

Connecting The Dust Bag

Plane

Exchange Planer Blades

TECHNICAL DATA

Voltage	230 V ~
Nominal frequency	50 Hz
Rated power input	1 200 W
No load speed	16 000 min-1
Planning width	110 mm
Planning depth	3 mm
Cable length	2 m
Sound pressure level*	LpA: 85 dB(A)

The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method. The declared vibration total value may also be used in a preliminary assessment of exposure.

Warning

The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined. It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Try to minimize the impact of vibration and noise.
Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

SAFETY NOTES

Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury:

Please read this manual carefully and use the unit only according to this manual.
If operating the tool causes discomfort in any way, stop immediately and review your method of use.
Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!
Persons with limited physical, sensorial or mental abilities are not allowed to use the unit, unless they are supervised and briefed for their safety by a qualified person.
Battery chargers are for indoors use only. Ensure that the power supply and charger are protected against moisture at all times.
This machine is not suitable for outdoor operation.
Ensure that the lighting is adequate.
Operate the machine only for planning wooden material such as beams and boards. Do not plan over metal objects such as nails or screws. This will damage the blade shaft and the planing blades.
Do not process material containing asbestos.
When working with the electric planer always wear safety goggles and dust musk. Wear appropriate clothing. Take off jewellery and tie up long hair.
Protect your hearing. Wear appropriate ear protection.
Hold the planer with both hands on the handles. Never lay down your hand near or in front of the machine on the workpiece surface.
Secure the workpiece against slipping. Never hold the workpiece in your hand while planning.
Lay down the electric planer after it has come to a complete standstill.
Attention: When working with some materials, hazardous dust and wood chips will be formed. Take protective measures.
Do not grasp into the planning debris opening (3). Avoid contact with rotating parts as well as with the planing blades.
Always switch on the machine before placing it against the workpiece. Otherwise the machine could kick back.
Make sure the planning sole lays flat against the workpiece, so the machine cannot get snagged.
Only operate the machine with all planing blades mounted.
Do not operate the machine without the belt cover.
If pieces of wood or foreign objects become jammed in the machine, turn off the electric planer and wait until the blade shaft (17) has come to standstill. Then pull the plug and remove the wooden object.
Always switch off the machine and pull the plug when taking a break, when not in use or during maintenance.
Do not operate the machine with blunt or damaged blades. Blunt or damaged blades may kick back and should be replaced immediately.
Only use original replacement parts.
Always keep the machine clean, dry and free from oil or dirt.
Periodically check all nuts, bolts and other fixings and tighten where necessary.
Do not operate the machine if it does not work properly or is damaged. Do not disassemble it and do not try to repair it yourself. In the case of problems contact the customer support department.

EC DECLARATION OF CONFORMITY

is according to the basic requirements, which are defined in the European Directives and their amendments.

2011/65/EU Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)

2014/30/EU Electromagnetic Compatibility (EMC)
EN 55014-1:2017+A11, EN 55014-2:1997+AC+A1+A2,
EN 61000-3-2:2014, EN 61000-3-3:2013

2006/42/EC Machinery
EN 62841-1:2015+AC, EN 62841-2-14:2015

Thomas Klingbeil,
Qualitätsbeauftragter / QA Representative

CUSTOMER SERVICES

Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch

DISPOSAL

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.