CNC4PC SHIELD C78 Connection Board User Manual
- June 9, 2024
- CNC4PC
Table of Contents
CNC4PC SHIELD C78 Connection Board
OVERVIEW
- This shield board is used for connections C76, M16D and C82.
- It has an encoder, limits, port_1 input, signal TTL or Open Collector port_2 output and connection for axes.
FEATURES
- RJ45 connector for Axes.
- RJ45 connector for encoder.
- RJ45 connector for limit.
- RJ45 connector for input port_2.
- Select jumper.
- Input terminal optoisolated.
BOARD DESCRIPTION
LEDS
TERMINALS
-
Outputs terminal TTL or Open Collector.
-
Wiring for Open Collector
- Outputs 1, 14, 16 and 17 simplified functional block diagrams
SELECT OUTPUT PORT_2
- Set jumper to use outputs as +5VDC TTL or Open Collector 1, 14, 16, 17
PINOUT
DIMENSIONS
DISCLAIMER
Use caution. CNC machines can be dangerous machines. Neither DUNCAN USA, LLC nor Arturo Duncan are liable for any accidents resulting from the improper use of these devices. This product is not a fail-safe device and it should not be used in life support systems or in other devices where its failure or possible erratic operation could cause property damage, bodily injury or loss of life.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>