BLAUPUNKT WS40WH Weather Station Owner’s Manual
- June 9, 2024
- Blaupunkt
Table of Contents
WS40WH/WS40BK-Weather Station
Owner’s Manual
Multi-
functional Weather station
WS40WH Weather Station
Important Notes
- safety and operating instruction should be retained for future reference.
- The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
- Do not install the product in the following areas:
- Places exposed to direct sunlight or close to radiators.
- On top of other stereo equipment that radiate too much heat.
- Blocking ventilation or in a dusty area.
- Areas where there is constant vibration.
- Humid or moist places.
- Do not place near candles or other naked flames.
- Operate the product only as instructed in this manual.
- Before turning on the power for the first time, make sure the power adaptor is properly connected.
For safety reasons, do not remove any covers or attempt to gain access to the
inside of the product. Refer any servicing to qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit; there are
no user serviceable parts inside. Refer all servicing to qualified service
personnel.
SAFETY INSTRUCTIONS
- Read Instructions – All the safety and operating instructions must be read before the product is operated.
- Retain Instructions – The safety and operating instructions should be kept with the product for future reference.
- Heed warnings – All warnings on the product and in the operating instructions should be adhered to.
- Follow instructions – All operating and users’ instructions should be followed.
- Installation – Install in accordance with the manufacturer’s instructions.
- Power sources – This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
- Water and moisture – To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
- Object and Liquid Entry – Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
- Servicing – Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
- Replacement parts – When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
- The highest environmental temperature suitable for this product is 35°C.
- ESD hints – If the product maybe reset or not reset to operation of control due to electrostatic discharge, just switch off and reconnect again, or move the product to another location.
- Battery
a. The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
b. The batteries should be drawn to the environmental aspects of battery disposal.
c. Battery usage CAUTION-to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:
. Install all batteries correctly, + and – as marked on the apparatus.
. Do not mix batteries (old and new or carbon and alkaline, etc.)
. Remove batteries when the unit is not used for a long time.
ERP2 (Energy Related Products) note
This product with ecodesign complies with the stage 2 requirements of
Commission
Regulation (EC) NO. 1275/2008 implementing Directive 2009/125/EC regard to
standby and off mode electric power consumption of electronic household and
office equipment.
WARNING
This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
- Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while.
- The appliance is not intended to be operated by means of an external timer or separate remote control system.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
- To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
- Do not place this unit close to a strong magnetic field.
- Do not place the unit on a amplifier or receiver.
- Do not place this unit in a damp area as the moisture will affect the life of electric components.
- If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
- Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
NOTICE
** Conformity
Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this
equipment is in compliance with the essential requirement and other relevant
provisions of Directive 2014/53/EU. Declaration of conformity can be obtained
from the product page at www.blaupunkt.com.
Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland,
Phone:** +48 22 688 08 00, E-mail: info@everpol.pl
Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please cat according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC,
which cannot be dispose with normal household waste. Please inform yourself
about the local rules on separate collection of batteries because correct
disposal helps to prevent negative consequences for the environmental and
human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box),polystyrene
foam(buffer) and poly ethylene (bags, protective foam sheet). Your system
consists of material which can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and old equipment.
Recording and playback of material might require consent. See Copyright Act
1956 and The Performer’s Protection Acts 1958 to 1972.
Many thanks purchase our model, this weather station product includes below
features. Please read and reference this manual carefully before operate the
unit. Please keep the manual for future operation reference.
Features
- Weather forecast: Sunny, Partly cloudy, Cloudy, Rainy, Snowy.
- Indoor/outdoor temperature.
- Indoor & outdoor humidity.
- In/outdoor maximum & minimum temp. & humidity history memory.
- 12/24 hours clock time, calendar.
- Alarm with snooze function.
- Maximum support and work with 3 outdoor wireless transmitters in different channel (3 transmitter included).
- Barometer
- Moon phase
- Colorful display with auto dimmer
Display & controls
- Indoor temperature/trend 2.
- Indoor humidity/trend
- Outdoor temperature/trend
- Outdoor humidity/trend
- Animated weather forecast
- Clock time
- Moon phase
- Battery compartment cover
- Barometric pressure
- Barometric trend
- Calendar
- Fold able stand ( unfold for table placement)
- Control buttons: alarm-memory-channel-snooze/backlight-up-down-set
- DC power jack
- Temperature
- Channel Number
- Low battery indicator
- Humidity
- Wall hanging
- Ventilation Hole
- °C/℉ switch button
- Sensor channel number 1/2/3 setting
- Battery compartment (2*1.5V AA alkaline batteries)
- Rope hanging Hole
Power setting
Plug in the supplied AC/DC power adaptor to an AC household outlet in order to
get power, open up the backup battery door on rear panel of main unit and plug
in the DC connector of power adaptor to DC power jack on the right side panel
of battery compartment, manage and order the power cord through out of the
hole at the right bottom corner of battery door, and close the battery door.
The display will light up, then the unit is ready work for you.
Open the battery compartment cover of outdoor wireless transmitter, insert 2 x
AA batteries to the compartment according to the correct polarity showed in
the compartment. (Batteries are included) We recommend use high quality
alkaline or lithium batteries for the best product performance. Heavy duty or
rechargeable batteries are not recommended.
The display of transmitter will show temperature and humidity data once get
the power ready. Short press the channel button(above battery compartment) to
switch the channel between channel 1~3. Short press C/F button to switch the
temperature unit.
The main unit can work with dry battery power only as well. Open up the
battery door on the rear panel, insert 3 x AA battery (not include) according
to engraved negative and positive polarity. Then the unit will ready work for
you. The battery power also can backup the settings.
Receive signal from outdoor wireless transmitter
The main unit can detect and receive the outdoor temperature and humidity
wireless signal from transmitter automatically after power setting ready.
There will take 3 minutes maximum for signal searching. The wireless
symbol(nearby channel on display) will flash on display during searching, and
becomes stable after get the signal. If there is no available signal be
received, the wireless symbol will be disappeared after 3 minutes, and outdoor
temperature and humidity data will show “ – – “ on display. In case you need
reconnect the wireless signal, please press and hold the channel button 3
seconds on top of main unit. The unit will scan and reconnect the wireless
signal one after one.
Placement and important notes:
- Important: The main unit are able to work and connect with 3 outdoor wireless transmitters maximum. Open up the battery door of outdoor wireless transmitter can see and adjust the channel(include 3 channels). It requires to set up supplied 3 wireless transmitter at different channel between each other for working at same time. You can check and know the channel 1/2/3 information on the display of wireless transmitter. can adjust the channel number and check the outdoor data between CH1-3 on display. You can take the same method to connect other wireless transmitter, but please set it in different channels. Only one wireless transmitter include in the package.
- please use and put main unit or transmitter device 1.5~2 meters away from interference source like computer monitors or TV sets. Please also place the main unit stand up far away with metal window frames.
- Please do not use other electronic products such as headphones or speakers operating at the same signal frequency (433.92MHz), which may cause interference. Your neighbors use electronic devices operating on the same signal frequency (433.92MHz) can also cause interference.
- To ensure accurate temperature measurement, place the device in a dry area, free of dirt and dust. Place out of direct sunlight and away from heat sources or vents.
- You can install the wireless transmitter outdoor. For better accuracy of using, please place the sensor lengthwise/ standing up 1.5~2 meters at least away from the ground with enough air flowing and protection without rainy. Please do not expose the sensor to direct sunlight for a long time.
- The maximum working distance of wireless transmitter is 80 meters away from main unit.
- The wireless signal from transmitter will refresh in every 114(channel 1)/134(channel2)/158(channel3) seconds in recycle.
Settings
Press and hold set button 3 seconds and get the weekday language text flash on
display, press + or – button to choose the weekday language(GER (German), ENG
(English), FRE (French), ITA (Italian), SPA (Spanish), DUT (Dutch), DAN
(Danish), press set button to confirm and skip to keep tone on/off setting,
repeat and finish rest setting for display auto dim start time/auto dim end
time/year/month&day format/month/date/ 12&24 hours format/hour/minute/air
pressure unit selection/ weather select/ exit (Press and hold up or down
button can accelerate the adjustment; there will auto save and exit current
setting if there is no further operation last for over 20 seconds)
Alarm and snooze
Short press alarm button on top panel can check the alarm time, press it again
to turn on/off the alarm function. Press and hold alarm button subsequently
can activate alarm setting mode, press + or – button to adjust the hour
digits, press alarm button to confirm and skip to minute setting which is same
operation as hour’s setup. Short press alarm button to finish the alarm
setting. In case you set up alarm successful, the relevant alarm icon will
show on display. Press top backlight and snooze can save and exist the current
setting.
When the alarm is ring up due to the setting time is being, press any button
(except top backlight/snooze button) to cancel the alarming voice, and it will
wake up again at same time in coming of next day. Short press top
backlight/snooze button to activate snooze function, which will wake up again
after 5 minutes. The snooze can repeat in each 5 minutes. Press any other
button (except snooze) can cancel the snooze.
The buzz alarm voice will last for 2 minute if there is no further operation.
Temperature and humidity
-
Indoor temperature range: -10 ~+50 ℃ / 14 ~122 ℉.
-
Outdoor temperature range: -40°C~60°C(-40°F~140°F) .
Remarks: LL.L℃ or HH.H℃ will show on display when out of the above range -
Indoor and outdoor humidity range: 1%-99% LL% or HH% will display when out of range
-
Temperature accuracy: ±1,0℃ between 0℃~ +50℃/ 32℉~104℉. ±1,5℃ outside this measuring range
-
Humidity accuracy: (40-70%) ± 5%, others ±8%
-
Press memory to check maximum and minimum history data, press and hold memory button to manually clear the record. (Remarks: Historical record will be cleared automatically at 00:00 every day).
-
Press set button to switch temperature units: ℃(Celsius degree) or ℉(Fahrenheit degree).
Temperature trend
The temperature trend arrow (nearby temperature data) in different directions
depending on whether the latest temperature reading is higher or lower than
previous readings.
Arrow angled upwards=Temperature rose up 1℃ in the past 1 hour.
Arrow in straight =Temperature changed less than 1℃ in the past 1 hour.
Arrow angled downwards=Temperature fell off 1℃ in the past 1 hour.
Humidity trend
The humidity trend arrow in different directions depending on whether the
latest humidity reading is higher or lower than previous readings.
Arrow angled upwards=Temperature rose up 5% in the past 1 hour.
Arrow in straight =Temperature changed less than 5% in the past 1 hour.
Arrow angled downwards=Temperature fell off 5% in the past 1 hour.
Weather forecast
The weather forecast is based on collected hourly barometric pressure value
data from the main unit. The forecast station predicts weather conditions for
the next 12 hours with 7075% accuracy. The default weather icon is partly
cloudy, the base station will calibrate the weather report in the first 1-2
week after power on ,based on the barometric pressure data. Weather forecast
will appear in one of the following combinations (reference only):
Please note that the device forecasts the weather based on limited parameters
and may differ from official weather forecasts which are calculated on the
basis of advanced algorithms.
Backlight and auto dim
When powered by batteries only, press top backlight/snooze button to turn on
the backlight.
The backlight will last 20 seconds and auto off.
When the unit powered by AC/DC adaptor, press top backlight/snooze button to
adjust
brightness level between high/middle/low.
In case of you set up the auto dim time, and the setup time is being. The unit
will enter to auto dim mode, and the auto dim icon will show next to the clock
time on display. The default auto dim time period is 22:00~8:00. Long press
top backlight/snooze button 3 seconds to turn on or off the auto dim function.
Barometric pressure
Once the main unit set up power ready, press the + or – button immediately can
adjust the barometric pressure values if you want to calibrate it. Short press
backlight/snooze button to exist setting.
Barometer range: 23.62-32.75inHg (600-832mmHg,850-1050hPa/mb ).
Please note that this weather station reads absolute air pressure, which may
differ from that in the official weather forecasts. The reason for this
difference is that the relative pressure reported in the official weather
forecasts is reduced to sea level. The absolute pressure indicated in this
model is the pressure at a given location at the appropriate altitude.
Low battery power indicator
- About outdoor sensor: When battery indicator shows next to the outdoor temperature, replace batteries in your outdoor sensor.
Moon phase
Moon Phase is changed according to Calendar automatically. There are 12 moon
phases in loop
Trouble shooting
Doesn’t display anything.| Check if the AC/DC power adaptor connect with unit
properly.
---|---
Temperature/humidity from outdoor sensor not displayed.| Check that the
distance between the thermometer and sensor doesn’t exceed 30m(recommended).
Make sure that the devices are located at least 2m from monitors and TV sets.
Avoid placing the devices on or close to window frames made of metal.
Avoid using electronic devices such as loudspeakers which operat e at the same
frequency (433.92MHz), close to the devices.
Please double check if the supplied 3 wireless transmitter was set up in
different channels each. .
Remove the batteries, wait a while and then reinsert them.
Displayed temperature is incorrect.| Remove the batteries, wait a while and
then re-insert them.
Make sure that the devices are not affected by heat sources or air
conditioning units and such.
Specifications
Display of data from 3 outdoor sensors on one screen
Indoor/outdoor temperature display
Indoor/outdoor humidity display
Temperature/humidity trend indication
Absolute air pressure display
Moon phase display
Max/min record of indoor/outdoor temperature & humidity
Weather forecast for next 12-24 hours with barometer
Weather forecast can be calibrated manually
Color LCD display with dimmer
LCD display dimensions: 128 x 80 mm
Clock (12/24 hour format) and calendar
Weekday display in 7 languages: (EN/GE/DA/SP/DU/IT/FR)
Alarm with snooze function
Auto Dim for night time
3 outdoor sensors with LCD display included
Sensor display dimensions: 25 x 17 mm
Low battery indicator for device and 3 outdoor sensors
Wall hanger/Table stand
Power supply: 5 V 1200 mA (power adapter included)
Outdoor wireless transmitter power source: 6 x 1.5 V (AA size, included)
Battery power: 3 x 1.5 V (AA size, not included)
IP54 (water proof, for wireless transmitter)
Wireless transmitter working frequency: 433.92 MHz
Power consumption: 0.32 W (main unit), 24 mW (wireless transmitter)
Device dimensions: 175 x 31 x 122 mm
Net weight: 0.238 kg
Sensor dimensions: 43 x 22 x 110 mm
Sensor net weight: 0.05 kg
Sensor Net weight: 0.032 kg
| Information published | Value and precision | Unit |
|---|
Manufacturer’s name or trade mark
Commercial registration
number Address| DONGGUAN SHIJIE HUAXU ELECTRONICS FACTORY Commercial
Registration Number: 440429543 Address: No.200,Technology East Road,Shijie
TownDongguanCity,Guangdong,P.R.China|
Model identifier| HX075-0501200-AG-001|
Inputvoltage| 100-240| V
Input AC frequency| 50/60| Hz
Output voltage| DC5| V
Output current| 1.| A
Output power| 6.0| W
Average active efficiency| 75| %
Efficiency at low load (10 %)| 71.| %
No-load power consumption| 50.| W
Enjoy It.
Competence Center 2N-Everpol Sp. z o.o. ul.
Pulawska 403A 02-801 Warsaw, Poland
phone: +48 22 688 08 00
e-mail: info@everpol.pl
www.blaupunkt.com
In case of questions or problems please contact our service.
Tel. 00 48 22 688 08 33
E-mail: info@blaupunkt-audio.pl
All rights reserved. All brand names are registered trademarks of their
respective owners.
Specifications are subject to change without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>