Ariete 2878 Milk Frother User Manual
- June 9, 2024
- Ariete
Table of Contents
Ariete 2878 Milk Frother
PRELIMINARY NOTE ON THE INSTRUCTIONS FOR USE
This appliance is equipped with all necessary safety devices. Nevertheless, carefully read all the safety warnings and use the appliance only as described in these instructions, to prevent injury or accidental damage. Keep these instructions for future reference at a later time. If the appliance is sold, also deliver these instructions for use to the new owner.
Symbols included in these instructions for use:
- This symbol warns of the risk of injury.
- This symbol warns of electrical injury risk.
Indication words:
- DANGER warns of possible serious injury or danger of death;
- WARNING warns of injuries and serious damage to property;
- CAUTION warns of minor injuries or damage to property. Additional information is marked in this way.
INTENDED USE AND PLACE OF USE
- The appliance is intended to heat and froth milk. Do not pour any other liquid or solid food in it.
- The appliance is designed for home use or similar, such as
- shops, offices or similar workplaces,
- farms,
- hotels, motels, bed and breakfasts, and other types of residential structures (for use by its guests).
- The appliance is suitable for use in closed and dry places.
IMPORTANT SAFEGUARDS
READ THESE INSTRUCTIONS CAREFULLY
RISK of using the appliance by children and persons with reduced capabilities
- Children shall not play with the appliance. Keep children under 8 years away from the appliance and the power cord.
- This appliance can be used by children older than 8 years and by people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge only under supervision or after having been instructed on the safe use of the appliance and possible dangers.
- Children do not have to clean the appliance unless they are over 8 years and are supervised.
- Place the appliance in a place inaccessible to children.
- Keep children away from packaging materials. There is also the danger of suffocation!
DANGER from electricity
- The appliance must never be immersed in water or other liquids. Water must never penetrate the electrical components.
- The base, the plug, and the power cable must not come into contact with water or other liquids, to avoid the danger of an electric shock. For the same reason do not place the appliance near a sink and/or a tub. Do not use the appliance outdoors or in rooms with high levels of humidity.
- Never touch the appliance, the plug, and the power cable with wet hands.
- Connect the appliance to an electrical outlet installed in accordance with the standards and fitted with a protective contact, whose main voltage complies with the technical data of the appliance.
- Never leave the appliance unattended while in use.
- Unplug it from the electrical outlet, …
- when faults occur during operation,
- after use,
- in the case of storms
- before cleaning the appliance.
- Always disconnect the plug, without pulling the power cable.
- The socket must be accessible so that in case of need the plug can be easily extracted.
- The power cable must not be bent or crushed. The device and the power cable must be kept away from hot surfaces and sharp edges.
- The appliance must never be connected and put into operation with a timer or a separate remote start-up system.
- Do not operate the appliance when there are no signs of visible damage on it or on the power cable, or when the appliance has been dropped.
- Do not make any changes to the product. Even the power cable must not be replaced on your own. Repairs to the appliance or the cable replacement must be carried out by a specialized workshop and/or our service center. Improper repairs can cause serious danger to the user.
WARNING against scalds and burns
- The container and the lid become hot during use! Do not touch hot surfaces. Take the container only from the bottom and the lid only from the edge. Let them cool both before cleaning.
- The hot milk and steam can cause burns. Use the appliance only when the lid is firmly on the container. Do not touch the appliance and its top when it is in operation. In particular, pay attention to the release of steam when opening the lid.
- Place the appliance on a flat, stable surface, easily accessible, and easy to clean. The appliance must not slip or tilt. Lay the power cable properly so as to avoid any danger of tripping. Make sure the power cable does not hang down from the supporting surface in order to avoid it from being pulled causing the appliance to fall to the ground.
WARNING – material damage
- Respect the MIN and MAX marks inside the container. The sleeve at the bottom of the container must be covered by milk. In case of an insufficient amount of milk, the appliance may overheat. In case of excessive amounts, milk can instead overflow.
- Before removing the container from the base, make sure that the heating and foaming process is completed and/or the appliance is off. Place the appliance at a sufficient distance from heat sources, such as. electric cooking plates or stoves.
- For cleaning do not use any chemical, abrasive, or aggressive detergent.
- The appliance and its accessories are not suitable for dishwashers.
- Use only original accessories.
- It cannot be fully excluded that certain types of paint, plastic, or furniture detergents may attack and soften the non-slip feet material. To avoid the formation of undesirable marks on the furniture, put possibly a non-slip base under the appliance.
- For proper disposal of the product pursuant to the European Directive 2012/19/EC please read the relevant leaflet enclosed with the product.
- Use only original accessories.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
The quantity and quality of the foam depend on many factors, including the milk fat content, the use of fresh or long-life milk, the milk temperature, and the brand. To avoid that milk frothing excessively, if you are using a new type of milk does not immediately fill the container up to the MAX mark, but first, make a test with a smaller amount. If milk should spill, immediately turn off the appliance. Wait until it cools a little, then clean it (see “Cleaning” chapter). We got the best results with semi-skimmed milk (1.5% fat).
DESCRIPTION OF THE APPLIANCE
- Lid
- Insert for rich froth
- Insert for light froth
- Spout
- MAX and MIN level
- Container
- Sleeve for insert
- Operation indicator
- On-off switch
- Power cord + Plug
- Power supply base
- Accessory compartment for one insert
PRELIMINARY PHASES FOR USE
Starting the appliance
Danger to children – Danger of death by suffocation and ingestion
Do not leave the packaging near children because it is potentially dangerous.
- Remove all packaging materials and make sure all components are present.
- Clean the container, the inserts, the sealing ring, and the lid as described in the “Cleaning” chapter.
Place the base
Danger – the risk of death by electric shock
Connect the appliance to an electrical outlet installed in accordance with the standards and fitted with a protective contact, whose mains voltage is fully compliant with the technical data of the appliance.
Warning against scalds and burns
- Place the appliance on a flat, steady, and easily accessible surface.
- Prevent the appliance from sliding and that the power cable hangs down from the supporting surface.
- Prevent children from grabbing the power cord, in this way tipping over the appliance.
- Position the appliance so that children cannot reach the hot parts.
Warning – material damage
Do not place the appliance or power cord close to or on top of hot electric or gas cookers, or close to a microwave oven.
- Place the base on a flat and steady surface.
- Plug into the mains socket.
The appliance is ready for use.
Choose the insert and pour the milk
- To obtain a large amount of froth fit the insert with a spiral.
Instead to warm slightly frothed milk or frothing a smaller amount, use the insert without a spiral.
- To avoid losing it, keep the insert that is not used in the compartment located at the bottom of the base.
Warning – material damage
Respect the MIN and MAX marks inside the container. The sleeve at the bottom of the container must be covered by milk. In case of an insufficient amount of milk, the appliance may overheat. In case of excessive amounts, milk can instead overflow.
- Remove the lid of the container.
- Insert the appropriate insert into the sleeve at the bottom of the container.
- Pour the milk to the maximum level, shown by the dash at the MAX mark:
MAX for the insert with spiral.
MAX for the insert without spiral.
- Place the lid firmly on the container.
Froth and heat the milk
During the first heating, a slight odour may develop, which is not dangerous. Provide adequate ventilation.
- Shortly press the ON/OFF button.
- The operation indicator light switches on in red.
- The appliance starts heating and frothing the milk.
- When the insert with spiral is used, the frothing process will have a duration of about 1.5 minutes
- When the insert is without a spiral, the frothing process will have a duration of about 2 minutes. The heating and frothing process then stops automatically. Then remove it is possible to remove the container from the base.
Froth the milk cold
It is also possible to froth the milk without heating it. To obtain a soft and creamy froth use only the insert with a spiral.
- Press the ON/OFF switch and hold it down for about 2 seconds, until the appliance starts to froth milk.
The indicator light switches on in blue. The appliance starts to froth milk. After about 1 to 1.5 minutes, the milk frothing process stops automatically. Then remove it is possible to remove the container from the base.
Stop or finish the milk heating and frothing in advance
- Press the ON/OFF switch.
The operation indicator light turns off.
- To continue to heat and froth, press the ON/OFF button again:
- briefly, if you want to heat and froth
- for a long time, if you want to froth without heating.
Turn off the appliance
To completely disconnect the appliance from the power supply after use, remove the plug from the electrical outlet.
SAFETY DEVICES
If the appliance has been switched on empty, after about 30-40 seconds it will automatically switch off to avoid overheating. Any intervention must be carried out with a cold appliance.
CLEANING
Danger – the risk of death by electric shock
Unplug it from the electrical outlet before cleaning the appliance.
The base, the plug, and the power cable should not be exposed to moisture.
These parts must also be protected against possible splashes or drops of
water.
The container must never be immersed in water or other liquids. Water must
never penetrate the electrical components.
Warning – material damage
For cleaning do not use any chemical, abrasive, or aggressive detergent.
After each heating and frothing process immediately clean the container, in order to avoid the milk drying inside it.
- Unplug it from the socket outlet.
- Remove the sealing ring from the lid and remove the insert from the sleeve into the container.
- Wash the lid, seal ring, and inserts with warm water and a dishwashing liquid.
- Only wash the inside of the container with warm water and dishwashing liquid.
- If necessary, clean the base with a slightly damp cloth.
- Carefully dry all parts, especially the container to avoid the formation of stains.
- Re-insert the seal ring in the groove of the lid.
FAULTS AND SOLUTIONS
FAQ’s
What is a milk frother used for?
With a milk frother, you may turn milk into microfoam and thick, velvety foam in the kitchen. To make café au lait, cappuccinos, lattes, and other beverages, frothed milk is typically added to coffee and espresso.
How much electricity is consumed by a milk frother?
If you prefer white coffee, a milk frother will use about 540W of power.
What is the benefit of frother?
Making the drink thicker in texture and giving it a layer of foamy milk froth will give you a new flavour sensation! Your drinks will appear and taste like they were created by a skilled barista, but in the convenience of your own home, by using a milk frother to add a coating of froth.
How long should a milk frother be used?
Turn on the frother after inserting it. With a cappuccino, you’ll want more foam than, say, a latte, so foam for 20 to 45 seconds, or until you reach your preferred consistency. As you froth, be careful to move the frother up and down the cup.
Do frothers require batteries?
Two AA batteries should power a strong milk frother.
What is the ideal temperature for milk to be frothed?
Typically, the optimal temperature range for foaming hot milk is between 140 and 155 °F/60 and 68 °C. The milk won’t be conducive to a fine froth if it boils and gets too heated.
A milk frother, does it also heat?
Jug frothers give you the chance to froth and heat milk at the same time. When whisking the milk to create smooth, even foam, they employ induction coils to generate heat within the container. Jug milk frothers are excellent for both new users and seasoned coffee drinkers because they are inexpensive and simple to operate.
Does cold or hot milk foam better?
Fresher milk froths better, and colder milk also steams better. Keep your steaming jug as cold as you can. Milk won’t foam if it is warm, hot, or old.
Can milk be heated in a milk frother?
Because electric frothers can heat milk, handheld frothers cannot, therefore if you want hot frothed milk with a handheld frother (like for a latte), you must heat the milk beforehand.
What happens when milk is frothed for too long?
Overdoing it, however, might cause the mixture to curdle, taste sour, and spoil the foam. The ideal serving temperature is between 130 and 150 degrees, with alternative milk generally being served at somewhat lower temps. Holding the pitcher correctly is essential if you want to guarantee that you reach a high enough ultimate temperature.
How can a milk frother be made cold?
Simply add milk or a dairy-free substitute to your milk frother to prepare. Press Start after setting the dial to “cold foam” or “cold stir”. I’m done now! Pour into your preferred iced tea or coffee beverage.
Is cream compatible with a milk frother?
You can froth and steam milk, half and half, or heavy whipping cream. Although technically you could use an electric hand frothing tool without any heat to whip coffee creamer into a little thicker consistency, steaming coffee creamer is not advised.
Is it necessary to heat the milk before frothing?
Whatever method you use, heating the milk will yield the finest results. In a saucepan, heat the milk until it is scorching, or 150 degrees Fahrenheit (measure using a food thermometer). Although warm to the touch, this is not simmering. Make the foam bubbles unique to your beverage.
Why does my milk suddenly lose its foam?
The milk starts to separate from the foam while the beverage rests, which causes the smaller air bubbles to rise.
Can milk be frothed twice?
The protein in milk is practically cooked when it is heated; as a result, it hardens and aids in the trapping of air to produce foam. Hence, as you might expect, if you continue to heat the milk a second time, the proteins that first helped the foam develop have already been denatured.
What temperature is ideal for drinking milk?
Drinking cold milk during the day in the summer is beneficial since it helps to chill the body. It is one of the greatest ways to relieve acidity, which might burn. A high calcium intake can also stop acidity.
Download this PDF Link:Ariete 2878 Milk Frother User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>