QFX E-1500 Professional Large Bluetooth Speakers Instruction Manual

QFX E-1500 Professional Large Bluetooth Speakers

Definitions

• MODE: The MODE button allows you to toggle through and select the speaker functions of your choice: Bluetooth, USB, SD Card, AUX, FM Radio.
• : Press the Loop button to loop the current .mp3 track, play list, or shuffle.
• TWS: Press to play or pause the selected .mp3 track. Press and hold down the button for TWS Sync TWS.
• : Press to select the previous .mp3 track. In FM MODE, use this button to select the previous FM radio station.
• : Press to select the next .mp3 track. In FM MODE, use this button to select the next FM radio station.
• FM Radio: Frequency-Modulated stations operate in a frequency band extending from 87.8 MHz to 108 MHz.
• MIC.PRIORTY: Press the MIC.PRIORTY button to prioritize the microphone over the music.
• TRS: Tip, Ring, Sleeve: A 3.5mm or 6.35mm balanced audio connector. Carries 2 balanced mono signals. Also known as 1/8” and 1/4”.
• TS: Tip, Sleeve: A 3.5mm or 6.35mm unbalanced audio cable. Also known as 1/8” and 1/4”.
• Instrument Cable: Unbalanced 6.35mm audio cable.
• RCA: An Audio/Video connection type: Radio Corporation of America (RCA).
• HDMI: High-Definition Multimedia Interface: Transmits digital audio and video signals.
• MP3: Compressed audio file typically 1/10th of a broadcast .wav file. MPEG Audio Layer-3.
• EQ: Equalizer: Use the EQ to boost or cut audio frequencies to shape the sound.
• LED: Light Emitting Diode: A semiconductor diode that glows when a voltage is applied.
• RGB: Light color values: Red, Green, Blue.
• USB: Universal Serial Bus: Used to transport digital information between digital components.
• TF Card: TransFlash card is used to carry digital information. Also known as a Micro SD Card.

6-STEP SETUP GUIDE

1. Find the AC power cord to the E-1500 located on the back panel of the unit.
2. Find a power outlet (AC 120V/60Hz) and connect the AC cord to the socket to supply the unit with power.
3. Move to the top panel and set the POWER switch to the “ON” position. The display screen should turn on. The E-1500 should now be ready to play music. If the Display doesn’t turn on, try a different power source.
4. On the back panel next to the RCA inputs, there is a LED. LIGHT switch. Set the switch to the “ON” position. Check the front side for of the E-1500 for flashing party lights.
5. Insert a USB flash drive or SD card into the corresponding port, found directly under the display screen, to play your .mp3 content. The E-1500 will automatically read the .mp3 files when inserted.
6. The MASTER VOLUME will increase and decrease the entire volume evenly. Make sure that the L and R Channel Knobs are turned to max before gradually raising the MASTER VOLUME.

E-1500 BLUETOOTH
Bluetooth Mode: Use the MODE button to enable Bluetooth on the E-1500. Open the Bluetooth settings on your mobile device and search for QFX E-1500. Select the option to pair both devices together. You can now sit back and enjoy the music from your favorite app. You won’t need reconnect the Bluetooth again when switching through modes.

E-1500 FM RADIO:
FM Radio: Frequency-Modulated stations operate in a frequency band extending from 87.5 MHz to 108 MHz. Use the MODE button to select the FM mode. In FM mode, press and hold the Play/Pause button to scan available frequencies in the area. Extend the telescoping antenna to enhance reception.

CONTROL PANEL

1. POWER: ON/OFF switch.
2. MIC.BASS & TREBLE: Boost or cut the bass and treble EQ on the microphone.
3. MIC.VOL: Turn the Knob to set the Microphone levels.
4. MIC INPUTS: 6.35mm (TS) microphone inputs. Connect up to 3 microphones.
5. MASTER VOL: Spin the wheel to increase and decrease the Master Volume.
6. MODE: Toggle through modes: USB/SD/LINE (AUX)/BLUETOOTH/FM MODE.
7. X-BASS CONTROL: Boost the X-Bass to increase the Bass.
8. MIC.DELAY & ECHO: Increase and decrease the amount of Echo and Delay for a spatial effect.
9. AUX INPUT: Insert a 3.5MM (TRS) from an external audio device for playback.
10. 6-BAND GRAPHIC EQUALIZER: Increase and decrease selected frequencies to shape the overall sound.
11. DISPLAY USB/TF/SD CARD Ports: Find the current mode information on the Display Screen. Below, insert a USB, TF Card, or SD Card to playback .mp3 music.

GLOBAL FUNCTIONS:

• MODE: The MODE button allows you to toggle through and select the speaker functions of your choice: Bluetooth, USB, SD Card, AUX, FM Radio.
• TWS: Press to play or pause the selected .mp3 track. Press and hold down the button for TWS Sync (See TWS Connection instructions).
• : Press to select the previous .mp3 track. In FM Mode, use this button to select the previous FM radio station.
• : Press to select the next .mp3 track. In FM Mode, use this button to select the next FM radio station.

ROUTING AUDIO

E-1500 BACK PANEL

1. LED Light: LED ON/OFF light switch.
2. RCA Input: RCA inputs.
3. Antenna: Telescoping Antenna.
4. AC Power: 110-220V, 60/50Hz input switch.
5. Fuse: 110 VF10/AC – 220VF8A/AC
6. Antenna: Telescoping Antenna.

RCA Input:
Use the RCA inputs on the back panel of the E-1500 to connect an external line level audio device to the unit. The E-1500 can be used to amplify the sound of the external audio unit. Use an RCA cable or a 1/8” (3.5mm) TRS cable to RCA. A few examples of external audio devices are, DVD player, TV, Tablets, PC computers, AND vinyl record players.

REMOTE CONTROL AND TWS

TWS CONNECTION
TWS connection: TWS Connection is only for two speakers of the same make and model.

1. Enable Bluetooth: Turn on both speakers and set them to BLUETOOTH mode.
2. TWS Sync: On one unit press and hold the Play/Pause (TWS) button for 3 seconds. The speaker will play a sound and the screen will read “BTST”. The other unit will display BT.
3. Mobile Device: Open the Bluetooth settings on your mobile device and search for QFX E-1500. Select the option to pair both devices.
4. Music Playback: Select music from the phone and enjoy True Wireless Stereo.
5. Exit TWS: Press and hold the Play/Pause/(TWS) button for 3 seconds to exit the TWS function.

SAFETY MEASURES

IMPORTANT SAFETY MEASURES
Before using this machine, please read all the safety and operating instructions. These safety and operating instructions should be kept in condition of consultation.

1. Electric Power Supply Line: Keep the power cord safe from being trampled on, pressed on by heavy objects, or pierced. Make sure that the cord has ample space to rest on the ground and is not stressed. DO NOT pull or drag or the power supply line.
2. Ventilation: This unit must be set in a ventilated space. DO NOT cover the vents on the back panel for any reason. If placed alongside a wall, distance the unit a minimum of 10cm to allow air flow. DO NOT surface that might restricted good air flow.
3. Dismantling: DO NOT dismantle or open the unit. This is a high-powered unit that can cause serious harm if tampered with. DO NOT Open.
4. Smoke: Please unplug the power supplies cord from the wall outlet immediately if unusual smoke appears and contact customer support.

FCC

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”

1-800-864-CLUB (2582)
Mon-Fri 9AM – 5PM (PST)
support@qfxusa.com
Mon-Fri 9AM – 5PM (PST)

WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN. To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids, heat sources such as radiators, heat registers or under extreme weather conditions. Clean only with a dry cloth. Users should exhibit extra safety when the WARNING or CAUTION symbol appears in this instruction manual and follow all precautions as they are stated.

LIMITED PRODUCT WARRANTY POLICY

Before returning your Product for service under this Warranty, please (i) read the instruction manual carefully and visit our website at www.qfxusa.com for Product updates and extended support documentation (e.g., Common Troubleshooting Guides); (ii) if you are still having trouble with your Product, please contact the QFX Customer Support Department. Subject to the terms and conditions herein, QFX, Inc. (hereinafter called “QFX”) warrants to the original purchaser of the Product (”Customer”) that for the applicable Warranty Period listed below, the Product will be free from defects in material or workmanship under normal, non- commercial use (”Defects”).

Warranty Period encompasses, as listed below, separate “Coverage Periods” for Parts and Labor, each Coverage Period to begin from the original date of Customer purchase. If Customer returns a defective Product (or any component thereof) during the applicable Warranty Period, QFX will, at its option, during the specified Coverage Periods for Parts and Labor (as applicable either: (i) repair the Product (or, as applicable, any component thereof) or (ii) replace the Product (or, as applicable, any component thereof) with a new or refurbished Product (or, as applicable, any component thereof), in either case free of charge to Customer for Parts and/or Labor (as applicable) during the specified Coverage Period only, and excluding applicable shipping charges (noted below), for which the Customer is responsible. The foregoing states the Customer’s exclusive remedy and QFX sole liability for breach of the limited warranty contained herein.

This warranty covers only normal use. This warranty is not transferable. QFX is not responsible for warranty replacement should the QFX label or logo be removed or should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, immersion in liquids, improper installation, improper shipping, damage caused by disasters such as fire, flood, or service other than by QFX. In addition, this warranty excludes any Product (or, as applicable, any component thereof) that has been subject to or Defects resulting from: (a) any neglect or misuse by a Customer, an accident, improper application, violation of operating instructions for the Product, any other Customer-induced damage, or the alteration or removal of any Product serial number; (b) any modification or repair to Product (or, as applicable, any component thereof) by any party other than QFX or a party authorized in writing by QFX; (c) any damage to Product (or, as applicable, any component thereof) due to power surges, incorrect electrical voltage, misconnection to any device, or malfunction of any device used with the Product (or, as applicable, any component thereof); (d) cosmetic damage to the Product (or, as applicable, any component thereof) caused by normal wear and tear; (e) shipping damage that occurs while the Product is in transit; (f) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions or (g) any acts of God.

Product is sold to Customer for personal, non-commercial use only. Product is not warranted for Customer’s commercial or rental use. In addition, Product is not warranted against failure, and should not be used by Customer for any application where (i) there is a risk that any data stored on Product will be breached or otherwise compromised, or (ii) the date stored on Product is relied upon for medical or lifesaving applications. QFX disclaims any Warranty for any of the foregoing uses to the fullest extent permitted by law. Customer assumes any and all risks associated with such uses of Product, and agrees to indemnify QFX for any damages claimed against QFX for such uses.

EXCEPT FOR EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS ARE PROVIDED “AS IS” AND QFX DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY (i) OF MERCHANTABILITY, (ii) OF FITNESS FOR A PARTICULAR PURPOSE, OR (iii) OF NON- INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL QFX BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF QFX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, QFX AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCTS CAUSING THE DAMAGES, IF ANY.

This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children. In order for the return to be processed, you must send the Product PREPAID to the address below in the original packaging or reasonable substitute to prevent damage and include: (1) a dated sales receipt (which must have a purchase date that falls in the Warranty Period specified in the table below) that indicates the place of purchase, model number of Product, and amount paid, (2) a detailed description of Customer’s problem with Product, (3) Customer’s full name, phone number, and return address, (3) all of the accessories that came with the Product package must be sent along with the main Product, (4) a cashier’s check or money order payable to QFX, Inc., in the amount specified for the item in the product table below for return shipping and handling. If in the case you cannot provide a money order or cashier’s check, you can contact The QFX Customer Support Representative to arrange payment via credit card. No returned Product will be shipped back to a PO BOX. If a returned Product is found to have no problem and/or does not include ALL of the requirements indicated above, it may be returned back to the customer and will not be processed.

QFX USA®, Inc.
RMA Processing
Customer Support Department
2957 E. 46th Street | Vernon, CA 90058
support@qfxusa.com
(800) 864-CLUB (2582) or 323-864-6900
qfxusa.com
Hours of Operation: Monday – Friday, 9am – 5pm PST

All prices and details below are for US Destinations excluding, Hawaii, Alaska and Puerto Rico. For excluded destinations and NON US destinations, please contact The QFX Customer Support Department directly for additional shipping fees and return instructions. If you do not find your Product below, your Product model conflicts with multiple categories, and/or are unsure of which category the Product you have purchased will fall under, please contact our Customer Support Department for further instruction. In order to determine the exact shipping cost that must be included with your prouuct or paid for the product being returned, please refer to the table below. Please find the product you wish to return by category or model number prefix. QFX will not provide any return or refund to any customer for merchandise and will only honor the Limited Warranty restrictions mentioned in this document. Please make sure to follow all directions prior to shipping back your item. If you are not sure what the shipping cost for your item is, or if your item category conflicts in the table below, please feel free to contact the QFX Support Department for further assistance.

THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESSED OR IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENT OR REPRESENTATIONS MADE BY ANY OTHER PERSONS OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, QFX SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE QFX PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY.
Some jurisdictions do not allow limitations on how long an implied warranty lasts, and some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you special legal rights and you may have other rights which vary from jurisdiction to jurisdiction.

www.qfxusa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>