PYLE PCMC1NTN Nintendo Switch Game Console Handle User Guide
- June 9, 2024
- Pyle
Table of Contents
PYLE PCMC1NTN Nintendo Switch Game Console Handle
Please read this instruction manual before using the unit. Please keep it for future reference.
Brief Introduction
Please read this manual in detail before use in order to operate and use it
correctly, and bring the superior performance of the product into full play.
The descriptions in this Manual are based on the default settings of the
device; all the pictures, statements and text information in this Manual are
for reference only. Please refer to the actual product. The content is subject
to update without further notice.
The update will be included in the new version of the Manual and the Company
reserves the right of final interpretation.
Available functions and additional services may vary by device software or
service provider. Please fully charge the Switch Controller before use! If
there are typographical errors or translation errors, we sincerely hope for
all users’ understanding!
Controller Button Description
Mode and Connection Instruction
Wireless BT Switch mode
- Turn on the Switch console, click the System Settings Menu Button on the Main Page interface and click the Airplane Mode option on the next-level option menu, and then click the Controller Connection (BT) to turn ON the Wireless BT function.
- Enter the Wireless BT pairing mode of the Switch Controller, click the Controllers menu on the Switch main page interface and then click the Change Grip/Order on the next level option menu, the Switch will search for the paired controller automatically.
- Press and hold the Y Button and then press the HOME Button for 2 seconds or press and hold the Pairing Button for 3 seconds to enter the Wireless BT search mode, LED 1 – LED 4 running lamp flashed. After successful connection, the Switch automatically distributes controller channel and the corresponding channel indicator light will always be on. Synchronous state or the Switch is pairing connection with controller, LED 1 – LED 4 running lamp flashing.
Note:
After the controller enters the pairing mode, it will be slept autom-atically
if there is no synchronization within 3.5 minutes. Press and hold the Pairing
button for 3 seconds to enter the pairing mode, short press the button to
reset the controller. In case of malfunction or crash of the controller
function, press th is button for short to reset the controller.
Wireless BT Android Mode:
Press A+ HOME button for 2 seconds to enter Wireless BT search mode, LED 2 +
LED 3 flash when pairing, LED 2 + LED 3 indicator light will be on after
connection successfully.
-
2.4G D-INPUT Mode:
Press”-“+ HOME button for 2 seconds to enter 2.4G search mode, LED 2 + LED 3 flash when pairing, LED 2 + LED 3 light will be on after connection successfully. -
2.4G X-INPUT Mode:
Press”+”+ HOME button for 2 seconds to enter 2.4G search mode, LED 1 + LED 4 flash when pairing, LED 1 + LED 4 light will be on after connection successfully. -
2.4G Android Mode:
Press”-“+ HOME button for 2 seconds to enter 2.4G search mode: LED 2 + LED 3 flash when pairing LED 2 + LED 3 light will be on after connection successfully. -
2.4G PS3 Mode:
Press L + HOME button for 2 seconds to enter 2.4G search mode, four LEDs flash at the same time, after successful connection, the Switch automatically distributes controller channel and the corresponding channel indicator light will always be on.
Remark: 2.4G Dongle is an optional and not standard configuration!
Re-connection Mode
Press the HOME button for 1 second to wake up the controller, and it will be
connected automatically with the paired console. It will be au-tomatically
slept if it fails to connect back for 10 seconds, it hasn’t wake-up function
when press other buttons.
Charging Indication
When the controller is power off, LED 1 – LED 4 mode indicator light flashes
slowly when charging, and the fully charged LED goes out. Battery low voltage
alarm: indicator light flashes; and indicator flashes slowly under charging
condition, and the indicator light is on when fully charged.
Automatic sleep/Power on/Power off
The Switch screen is off and the controller automatically sleeps; the
controller automatic sleep (including sensor action) if there is no keystroke
within 5 minutes.
In Wireless BT mode, press the HOME button for 5 seconds to shut down the controller and disconnect from the Switch. Short press the Pairing button could to shut down the controller directly, short press the HOME button for 1 second to turn on and wake up the controller.
Low Voltage Alarm
When the battery of the controller is lower than 3.SSV+0.1 V, the current
working channel light flash to indicate low battery.
If continue to use the controller until the voltage lower than 3.45 V, the
controller is automatically entered into sleep state.
USB Mode Function
Connect the controller with USB cable and insert the cable to Switch USB port,
the controller will be automatic identification as a wired game pad, and you
want open the switch cable connection function in USB cable mode. Connect USB
cable with the controller and insert it to PC, it will be automatic
identification as an X-INPUT Game pad mode, LED 1 + LED 4 flash. On PC X-INPUT
mode, long press the”-“+ “+” button for 3 seconds to switch to D-INPUT mode
and LED 2 + LED 3 indicator light flash. Connect USB cable with the controller
and insert it to PS3 console and press the L button together, it will be
automatic identification as a PS3 Game pad. Connect USB cable with the
controller and insert it into the USB port of Android device, it will be
automatically recognized as Android Game pad mode, and LED 1 + LED 4 light
will be on.
LED indication of each USB cable mode: Switch game pad will be automatically assigned the corresponding channel indicator by the Switch;
X-input mode: LED 1 + LED 4 indicator light on;
D-input mode: LED 2 + LED 3 indicator light on;
PS3 mode: Gamepad channel indicator allocated by PS3 console.
TURBO speed adjustment, 3 gears speed, 8Hz-12Hz-15Hz, Default to 12Hz.
Press the TURBO button and press the corresponding button to set TURBO; You
can set A, B, X, Y, L, ZL, R, ZR; If you want to cancel the setting, repeat
the setting operation; Adjust TURBO speed: TURBO+UP: Increase one gear
speed;TURBO+DOWN: Decrease one gear speed.
SWITCH Motor Vibration Strength Adjustment
Press and hold the L +ZL +R+ZR button for 3 seconds for adjustment, there are
3 levels of strength, 25%-50%-100% Default to 50% strength. After setting, the
corresponding level lamp is always on for 1 second, and the motor vibrates for
1 second.
Six-Axis Sensor Adjustment
Press the”B” +”-“+HOME button for power on, two sets of lights flash each
other, press again”+” button for adjustment.
Reset Function
When the controller function is abnormal or crashes, you can short press the
Pairing button to reset the controller.
Controller Reference Current
ELECTRICAL SPECIFICATIONS
California Prop 65 Warning
WARNING:
This product contains Nickel carbonate which is known to the state of
California to cause cancer birth defects and other reproductive harm. Do not
ingest.
For more info g o to: www.P65warnings.ca.gov
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and(2) this device must
accept any interference received, including interference that may cause
undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Pyle USA.com
VISIT US ONLINE:
Have a question?
Need service or repair?
Want to leave a comment?
PyleUSA.com/ContactUs
Questions? Issues?
We are here to help!
Phone: ( 1) 718-535-1800
Email: support@pyleusa.com
SCAN ME
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>