Bluestone TWS39 Sync Wireless Earbuds User Manual

Bluestone TWS39 Sync Wireless Earbuds User Manual

Product Overview

USB Charging Cable

Charging Case:

1. Connect the Micro USB end of the provided Charging Cable into the Micro USB Port of the Charging Case.
2. Connect the USB end of the USB Charging Cable into any USB Charging Port.
3. While charging the Charging Case Indicator Lights will blink.
4. Power LED Indicator will display 4 bars for each earbud when it‘s fully charged.

Charging Earbuds:

1. Charge the Earbuds by placing them into the already charged Charging Case.
2. The earbud’s Pairing Indicator Lights will glow red while being charged.
3. All Indicator Lights will turn off once the earbuds are fully charged.

Pair Both Earbuds (TWS):

1. Take the two earbuds out of the charging case.

2. The earphones will automatically turn on and automatically pair.
   (Voice prompt: power on, left channel, right channel, waiting for connection)

3. Turn on the Bluetooth on your phone and click on the connection pair name “Bluestone Sync” to connect and wait for the voice prompt “Connected!’

(If you have trouble pairing please refer to your Device’s Bluetooth Pairing Instructions as methods may differ.)

– After a successful connection you can listen to music and make a phone call.
– Shut down, play, and pause can be controlled by either of the multi-function
buttons.
– After pairing for the first time just remove he earbuds from the case to
automatically reconnect.

Pair a Sigle Earbud:

1. After pairing both earbuds, to pair a single earbud, remove one from the case wait for the voice prompt “Connected!’

If both earbuds are not paired together:

1. Power off the two earbuds, then press the touch sensor of the two earbuds at same time and do not release for about 10 seconds
2. Wait for blue lights, alternating red and blue lights, release
3. Your earbuds are ready for to be paired with your phone.

Make a Call:

1. Connect the earbuds to your Phone’s Bluetooth.
2. Use your Phone’s interface to make, or receive, a call.

Touch Sensor:

1. Single tap on either earbud to pause, and repeat to play.
2. Double tap left earbud to play the next song, double tap the right earbud to play previous song.
3. Triple tap right earbud for volume down, and triple tap left earbud for volume up
4. Long press either earbud for Google Assistant, or Siri

Listen to Music:

1. Connect the earbuds to your Phone‘s Bluetooth.
2. Use your Phone’s interface to select your music.
3. Once paired music will automatically play through the earbuds.

Turn Off the Earbuds:

1. Place your earbuds into the case to turn them off

IMPORTANT SAFEGUARD

• Do not use this unit far anything other than its intended use.

• Keep the unit away from heat source, direct sunlight, humidity, water or any other liquid.

• Do not expose the device to extremely high or low temperatures, as it may damage the battery.

• Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.

• Do not use the unit if it has been dropped or damaged in any way.

• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
  Keep the unit out of reach of children.

• This unit is not a toy.

BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries ate environmentally safe when fully discharged.
Please refer to your local and state laws for battery disposal procedures.

1 Year Limited Warranty
Please Email: cs@smtekgroup.com

CUSTOMER SUPPORT

OSM TEK GI0UP INC, All rights reserved.
BlueStone is a trademark otSM TEK GI?0UP INC.
New York, NYl000l
www.smtekgroup.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>