HomeSelects 6219 T-8 Vapor Tight Light Instruction Manual
- June 9, 2024
- HomeSelects
Table of Contents
T-8 Vapor Tight Light
Model 6219
INSTALLATION MANUAL
Assembly and safety instructions
DANGER: Before installation, turn off the main power at the circuit
breaker.
WARNING: Installation must be performed by a qualified licensed
electrician.
CAUTION: To prevent electric shock, do not insert any objects through
openings.
INSTALLATION INSTRUCTIONS
1 Assembly of the light fixture
Remove the metal fixture pan from the base housing by pinching together the
retainer clips. Install the retainer clips by snapping them into the base
housing.
2 Connecting the wires
Connect the black supply wire to the black fixture wire.
Connect the white supply wire to the white fixture wire.
Connect the ground supply wire to the ground fixture wire.
3 Assembly of light fixture
Assemble the light fixture using the clips.
Make sure the acrylic diffuser is seated correctly for a tight fit.
Install the T-8 fluorescent tubes carefully (tubes not included).
4 Mounting the fixture
Mount the metal clips to the surface where light is to be placed.
The mounting clips should be spaced 31” apart Snap the fixture into the clips
making sure it is secure Never drill through fixture to mount. This will
compromise the water tight feature and could cause damage to the fixture.
Accessories included
CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY QUESTIONS PRIOR TO INSTALLATION
PRODUCT MAINTENANCE
- To clean the outside of the lamp, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the ixture. DO NOT CLEAN THE LED CHIPS!
- Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust and wipe carefully.
LIMITED WARRANTY
The manufacturer warrants this lighting ixture to be free from defects in
materials and workmanship for a period of two (2) years from date of purchase.
This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be
defective, the manufacturer’s only obligation, and your exclusive remedy, is
the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modiications, alterations, neglect or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set-up, or used in any way not in accordance with the instructions
supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration, or
faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the inish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear. The manufacturer does not warrant and specially disclaims any
warranty, whether expressed or implied, of itness for a particular purpose,
other than the warranty contained herein. The manufacturer speciically
disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor/expense
costs involved in the replacement or repair of said
product.
KEEP your receipt and these Instructions for Proof of Purchase.
………………………………………….
…………………………………………
…………………………………………
www.HomeSelects.com
Thank you for purchasing this Vapor Tight Light. For more information please
e-mail us at info@HomeSelects.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>