JBL Quantum 360X Wireless Over The Ear Gaming Headset User Guide

JBL Quantum 360X Wireless Over The Ear Gaming Headset

JBL QuantumENGINE
DOWNLOAD JBL QUANTUMENGINE TO GAIN ACCESS TO QUANTUM 3D AUDIO TECHNOLOGIES. JBLquantum.com/engine

Software requirements
Platform: Windows 10 (64 bit only) / Windows 11 500MB of free hard drive space for installation

• Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE
• JBL QuantumSURROUND available on Windows only.
  Software installation required.

WHAT’S IN THE BOX

Requirements

JBL QuantumENGINE SOFTWARE REQUIREMENTS

Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC

Connectivity| PC| PS4/PS5| XBOX™| Nintendo Switch™| Mobile| MAC
---|---|---|---|---|---|---
2.4GHz Wireless|  | Stereo| Stereo| Stereo| Not compatible| Stereo
Bluetooth| Stereo| Not Compatible| Not Compatible| Stereo| Stereo| Stereo

OVERVIEW

1. Game audio-chat balance dial
2. Volume Control
3.  Microphone Mute / unMute
4. CHARGING LED
5. USB-C port
6. 2.5mm jack for boom microphone
7. Flat-fold ear cup
8. POWER / 2.4GHz / Bluetooth LED
9. Power on / off and Bluetooth pairing slider
10. 2.4GHz LED
11. 2.4GHz PAIRING BUTTON

POWER ON & CONNECT (XBOX)

POWER ON & CONNECT (PC, mac ETC.)

Bluetooth

BUTTON COMMAND

First time setup

• Connect the headset to your PC via 2.4GHz USB wireless connection.
• Go to “Sound Settings” -> “Sound Control Panel”.
•  Under “Playback” highlight “JBL Quantum360X WIRELESS FOR XBOX Game” and select “Set Default” -> “Default Device”. 8d Highlight “JBL Quantum360X WIRELESS FOR XBOX Chat” and select “Set Default” -> “Default Communication Device”.
•  Under “Recording” highlight “JBL Quantum360X WIRELESS FOR XBOX Chat” and select “Set Default” -> “Default Device”.
• In your chat application select “JBL Quantum360X WIRELESS FOR XBOX Chat” as the default audio device.
• Follow the onscreen instructions to personalize your sound

Dual source switching

MICROPHONE

CHARGING

LED BEHAVIOURS

TECH SPEC

• Model:
  QUANTUM360X WIRELESS FOR XBOX

• Driver size:
  40 mm Dynamic drivers

• Frequency response (Passive):
  20 Hz – 20 kHz

• Frequency response (Active):
  20 Hz – 20 kHz

• Microphone frequency response:
  100 Hz – 8 kHz

• Max input power:
  30 mW

• Sensitivity:
  98 dB SPL @1 kHz / 1 mW

• Maximum SPL:
  94 dB

• Microphone sensitivity:
  -42 dBV / Pa @1 kHz

• Impedance:
  32 ohm

• 2.4GHz Wireless transmitter power:
  < 7 dBm (EIRP)

• 2.4GHz Wireless modulation: GFSK

• 2.4GHz Wireless carrier frequency:
  2402 MHz – 2480 MHz

• Bluetooth transmitted power:
  < 6 dBm (EIRP)

• Bluetooth transmitted modulation:
  GFSK, π/4-DQPSK

• Bluetooth frequency:
  2402 MHz – 2480 MHz

• Bluetooth profile version:
  HFP: v1.5, A2DP: v1.3

• Bluetooth version:
  BT Core: v5.2

• Battery type:
  Li-ion battery (3.7 V / 500 mAh)

• Power supply:
  5 V, 1 A

• Charging time:
  2 hrs

• Music play time with only 2.4GHz on:
  Up to 22 hrs

• Talk time with only 2.4GHz on:
  Up to 22 hrs

• Music play time with only BT on:
  Up to 26 hrs

• Talk time with only BT on:
  Up to 26 hrs

• Microphone pickup pattern:
  Omni-directional

• Weight:
  253.1 g

IC RF Exposure Information and Statement for Headphone

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A- JBLQ360WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.007 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-Q360XWLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.238 W/Kg.

Head operation

The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ360WL

Body operation

The device was tested for typical bodily operations where the product was kept with 5 mm distance attached away from the body. Non-compliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.
IC: 6132A-Q360XWLTM

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Product specifications and app screens are subject to change without notice.
HP_JBL_Q360X_QSG_Global_SOP_V9

References

• JBL Quantum Support
• Anatel — Agência Nacional de Telecomunicações
• Official JBL Store - Speakers, Headphones, and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>