pTron Fusion Bold BT Speaker User Guide

: July 20, 2024
: pTron

Table of Contents

pTron Fusion Bold BT Speaker
Product Usage Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

pTron Fusion Bold BT Speaker

Specifications:

Product Name : Fusion Bold BT Speaker
Default Volume : 50%
Charging Port : USB Type C
Output: 5 volt (DC)
Wireless Range: 10 meters

Product Usage Instructions

Getting Started & Charging:

Unbox the Party Speakers and remove all packaging materials.
Place the speakers on a flat surface.
Connect the USB Type C cable to the charging port on the speaker’s backside.
Connect the USB end of the charging cable to a Power Source with a 5-volt (DC) output.
Charge the speakers fully before initial use for the best battery performance.

Bluetooth Pairing:

Turn on the party speakers by rotating the knob button.
Enable Bluetooth on your smartphone or tablet and search for nearby devices.
The speaker will enter pairing mode automatically.
Select “pTron Party Speaker” from the available devices list to pair.
Once connected, a voice prompt will confirm the connection.

Basic Operation:

Power on/off : Rotate the knob button.
Volume control: Rotate the knob button to adjust volume.
Play/Pause : Press the play/pause button to start or pause audio playback.
Next/Previous track: Use the track buttons to navigate music tracks.
Mode Button : Long press the M button to switch between Bluetooth and FM mode.

LED Light Show:

To activate LED lights, long press the Light button.
Cycle through different lighting modes by multiple long presses of the light button.
To turn off LED lights, press the light show button four times.

TWS Function:

To use the TWS Function, turn on two speakers within range and press the TWS button twice for automatic connection.

FAQ

How do I troubleshoot Bluetooth pairing issues?
- If the speakers do not pair, ensure they are in pairing mode and try again.
What should I do if the LED lights are not working correctly?
- Try turning them off and on again to resolve any issues.
How can I ensure optimal battery life?
- Fully charge the speakers before initial use and avoid over-charging to maintain battery health.

Important : pTron ‘Fusion Bold ’ speaker is set at 50% default volume. You can increase the volume through the speaker or speaker remote or through the connected device. Getting Started & Charging:

i. Unbox the Party Speakers and remove all packaging materials.
ii. Place the speakers on a flat surface.
iii. Connect the USB type C cable to the charging port on the speaker’s backside, and connect the USB end of the charging cable to a Power Source such as a USB Charger or other Charging Devices with a 5 volt(DC) output.
iv. Charge the speakers fully before initial use for the best battery performance. Bluetooth Pairing:
i. Turn on the party speakers by rotating the knob button.
ii. On your smartphone or tablet, enable Bluetooth and search for nearby devices.
iii. The speaker will enter pairing mode automatically.
iv. When you see “pTron Party Speaker” in the list of available devices, select it to pair. v. Once the speaker is connected with the BT device it will respond with a voice prompt, “ptron Bluetoothspeakeris connected”
- Note : If no device is connected within 5 minutes after turning on the speaker, the Speaker will automatically turn off.

Basic Operation:

i. Power on/off : Turn on the party speakers by rotating the knob button.
ii. Volume control: Rotate the knob button to increase or decrease the volume.
iii. Play/Pause : Press the play/pause( ) button to start or pause audio playback.
iv. Next/Previous track : Press one time buttons to move to the next or previous track when playing music.
v. Mode Button: Long Press once the “M” button to change the speaker mode (Bluetooth and FM mode)

Note:

i. You can also control the above basic operation with the remote, which is provided with the speaker. The speaker will automatically detect the Aux, TF card and USB drive after inserting these devices.
ii. The charging cable works as an FM antenna in FM mode, so it is mandatory to connect the charging cable in FM mode.

LED Light Show:

i. This speaker comes with built-in LED lights that add excitement to your party atmosphere.
ii. Long press the “Light” button to activate the LED lights. You can cycle through different lighting modes by pressing the “light” button multiple times.
iii. To turn off the LED lights, press four times the light show button.

TWS function:

i. This speaker comes with TWS Function, so when two speakers turn on within proximal range andpressTWSbutton twice, they will automatically connect to each other.

Troubleshooting:

i. If the speakers do not pair with your Bluetooth device, make sure the speakers are in pairing mode and try again.
ii. Check the volume level on both your audio source and the speakers to ensure they are not set too low.
iii. If the LED lights do not work correctly, try turning them off and on again.

Important: Please use this speaker within a 10-metre wireless range from the connected device

Safety Precautions

Please keep this device away from extreme heat, liquids, humidity or corrosive environments.
Please don’t over-charge the product as it will decrease the service life of the battery.
Using incompatible USB cables or high-voltage chargers can damage the product & void the product warranty. We strongly recommend using good quality DC5V-1A chargers & the USB cable included in the package.
This product or the Bluetooth function should not be used during charging.
Don’t jam the ports such as charger port, LED port, etc.
It is recommended to utilize the product below the maximum volume in order to protect your hearing.
Please don’t open/temper the product or the product’s battery.
Please keep the product out of children’s reach.
Dispose the product responsibly and adhere to your local authority guidelines.

Packing Box Content
1 Speaker, 1 Wired mic, 1 Remote, 1 Aux cable,1 USB type C charging cable, 1 User Manual/Warranty QRCard

What is Covered in Warranty?

Manufacturing defects in materials and workmanship of the product ONLY. This warranty applies when the product is used under normal conditions and the purpose for which the product was designed.  No warranty on product accessories..  To avail warranty, Product
Registration is Mandatory at https://ptron.in/apps/product-registration
Please read through the complete warranty details at https://ptron.in/pages/repair-service-warranty

Customer Care Details:

Mail: support@ptron.in
Tel: 040 – 67138888
Service Centers List: https://ptron.in/pages/ptron-service-centers
Disclaimer: The color and specifications shown in or mentioned in the user manual may differ from the actual
product. Images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.