BONECO S200 Humidifier Steamer User Manual
- October 29, 2023
- BONECO
Table of Contents
TRADITION SINCE 1956
A SWISS COMPANY
S200
MANUAL
Read and save these instructions
Always observe all safety notes (included separately in delivery).
INSTRUCTION FOR USE
ITEMS INCLUDED
HEALTHY AIR IS A BASIC NEED.
There is little to which we react with greater sensitivity than poor air. And yet many people do not pay enough attention to air quality, which has consequences for health and quality of life. This makes us all the more pleased that you have chosen a TOPBONECO appliance to ensure that the basic need for healthy room air is satisfied for you and the people around you.
AVAILABILITY OF ACCESSORIES
You can obtain replacements for worn-out accessories as well as additional accessories from:
- At your BONECO specialist dealer,
- At www.shop.boneco.com or
- Directly via the “BONECO healthy air” app.
ITEMS INCLUDED
BONECO S200 A7417 CalcOff®
A451 anti-mineral pad Quick Manual
Safety instructions
OVERVIEW AND PART NAMES
1 Steam tube cover with fragrance container
2 Appliance cover
3 Water tank
4 Water tank cap
5 Water level indicator
6 Output regulator
7 Steam output
8 Steam tube
9 A451 Anti-Mineral-Pad
10 Power cord
TECHNICAL DATA
**TECHNICAL DATA***
| Mains voltage | 220 – 240V ~ 50/60Hz |
|---|---|
| Power consumption | 145 W / 285 W |
| Humidity output | 300 g/h ** |
| For rooms up to | 50 m² / 125 m³ |
| Water capacity | 3.0 liters |
| Dimensions L×W×H | 172×316× 281 millimeters |
| Weight (empty) | 2.8 kg |
| Operation noise level | < 42 dB(A) |
- Subject to change
** @ 230V ~ 50 Hz
PUTTING INTO OPERATION
Place the BONECO S200 on a stable surface.
Place the included anti-mineral pad on the heating plate.
Fill the water tank with cold tap water.
Plug the power cord into a power outlet.
Switch on the BONECO S200 with the output regulator.
Select level 1 or level 2 for the steam output.
HANDLING
SWITCHING ON AND OFF
The BONECO S200 is operated manually. The appliance will run until the control knob is moved to the “0” position.
If the water tank is empty, automatic shut-off prevents the appliance from overheating or becoming damaged.
1. Switch on the BONECO S200 by moving the control knob from the “0” position to the “I” position.
2. Increase the humidity output by moving the control knob to the “II”
position.
3. Switch off the appliance once the desired humidity has been reached.
DISPLAY DURING OPERATION
The LED ring on the control knob indicates the operating state.
Blue (constant): The appliance is functioning normally; there is water in the tank.
Red (constant): The appliance is switched on. However, the humidifying function has been switched off automatically because the water tank is empty.
Blue (pulsing): Cleaning mode is active.
CLEANING
SAFETY INSTRUCTIONS
Always unplug the BONECO S200 before you start cleaning it! Failure to do so can result in electric shock and fatal injury!
Do not use alcohol or corrosive cleaning agents for cleaning.
CLEANING THE HOUSING
In most cases, a dry cloth can be used for cleaning. If stubborn dirt is present, clean the housing using a damp cloth. Add a small amount of dishwashing detergent to the water. Household cloths and window cleaners can also be used.
REPLACING THE ANTI-MINERAL PAD
The anti-mineral pad absorbs lime in the water so that the heating plate does not become coated in limescale as quickly. This allows the BONECO S200 to function optimally at all times and descaling is required less frequently.
Over time, the anti-mineral pad becomes hard and less effective due to the absorbed lime.
Check the anti-mineral pad after each cleaning. Replace the anti-mineral pad if it feels hard and rigid.
You can find replacements at your BONECO specialist dealer or in our online
store at this address:
www.shop.boneco.com
CLEANING FUNCTION
SAFETY INSTRUCTIONS
Always unplug the BONECO S200 and wait one hour so the remaining water can
cool down.
Failure to do so can result in severe burns!
PROCEDURE
Although the anti-mineral pad absorbs most of the lime in the water, the heating plate of the BONECO S200 experiences limescale build-up after an extended operating time.
The BONECO S200 is equipped with a cleaning function for simple and convenient descaling. This warms and cools the heating plate multiple times in order that the lime becomes crumbly and can be easily removed.
DURATION OF THE CLEANING
The cleaning usually lasts between 1 and 4 hours. However, the duration can be adjusted at your discretion until the desired effect is achieved.
STARTING THE CLEANING
1. Switch off the BONECO S200 and let it cool down for 1 hour.
2. Remove the anti-mineral pad and empty the water tank.
3. Mix 1 bag CalcOff® with 1 liter (about 1 quart) of
warm tap water.
4. Add the mixture to the BONECO S200.
5. Move the control knob to the position to start the cleaning.
6. Switch off the BONECO S200 after the desired cleaning time.
7. Unplug the BONECO S200 and rinse the water base with tap water.
8. Place the anti-mineral pad back in the water base.
REPLACING THE ACCESSORIES
A7417 CalcOff® A451 anti-mineral pad
AVAILABILITY OF ACCESSORIES
You can obtain replacements for worn-out accessories as well as additional accessories from:
- At your BONECO specialist dealer,
- At www.shop.boneco.com or
- Directly via the “BONECO healthy air” app.
CLEANING INTERVALS
RECOMMENDED CLEANING INTERVALS
| Interval | Action |
|---|---|
| After the third day without operation | Empty water base and water tank and |
fill with fresh water
Every 2 weeks| Clean water tank, appliance cover, fragrance container and
steam tube with dish detergent and a soft plastic brush and rinse well
Every 2 to 4 weeks| Check A451 Anti-Mineral-Pad and replace if necessary
Annually| Clean the housing with a damp cleaning cloth and wipe dry; use a
cleaning agent suitable for plastic as necessary
FRAGRANCE CONTAINER
ABOUT THE FRAGRANCE CONTAINER
The fragrance container is integrated into the steam tube cover.
Fill only a small amount of fragrances into the fragrance container and make sure not to overfill it.
Fragrances must not be directly added to the water tank, water base or evaporator basin because the material and, consequently, the appliance are damaged.
BONECO is a registered trademark of BONECO AG, Switzerland
BONECO AG, Espenstrasse 85, 9443 Widnau, Switzerland
48534-02
References
- BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco
- BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco
- BONECO博瑞客（中国）官网
- BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco