POTTER SL24W-1530 Select-A-Strobe Owner’s Manual

June 9, 2024
POTTER

POTTER SL24W-1530 Select-A-Strobe Owner’s Manual
POTTER SL24W-1530 Select-A-Strobe

Features

  • Meets or exceeds NFPA/ANSI Standards and ADA Accessibility Guidelines
  • UL Listed for wall mounting
  • Screw terminal capacity up to AWG12
  • Universal mounting plate included
  • 24V DC strobe with two fi eld selectable settings: 15cd or 30cd
  • Polarized strobes with wide operating voltage range using filtered or unfiltered FWR input voltage
  • Mounts to 4” square, single gang, double gang, or octagonal back box
  • Tamper­proof candela selector switch
  • Synchronization requires Sync Module (SMD10­3A)
  • Available in red or white housing

Amseco’s Select­ A­ Strobe Series is designed to comply with the Americans with Disabilities Act (ADA) and meet UL standard 1971 requirements for emergency signaling devices for the hearing impaired.
The Select­A­Strobe SL24W series features a unique candela intensity field selector switch for alternating the candela output 15cd to 30cd (75cd on axis).
The strobe housing is clearly labeled with vertical “FIRE” lettering.
The strobe is polarized for connecting to supervised fire alarm circuits and is designed with a xenon flashtube to provide maximum performance with a candela intensity field selector switch.
The SL24W-1530 can be synchronized by using the SMD10-3A Sync Module to comply with NFPA recommendations concerning photosensitive epilepsy when installing two or more visual appliances within the field of view.
The strobe signals are listed for indoor use, wall mount, under UL 1971 standard.

Ordering Information

Model Number| Housing Color| Input Voltage| Operating Voltage Range| Selectable Strobe Output| Flash Rate| Wiring Type| Mounting Type| Sync Module| Operating Temperature Range
---|---|---|---|---|---|---|---|---|---
SL24W•1530R| Red| Regulated 24V DC/ FWR| 16 • 33V DC

16 • 33V FWR

| 15cd or 30cd| 60 times/ min.| Terminals| Wall Mount| SMD10•3A| 32°F • 120°F (0°C • 49°C)
SL24W•1530W| White

Engineering Specifications

The visual alarm indicating appliance shall be Amseco model SL24W-1530 or equivalent device.
The strobe shall be listed under UL 1971 standard for signaling devices for the hearing impaired and shall be approved for fire protective service.
For outdoor application and in UL NEMA-4X rated or UL Haz Dust Tight condition, use Amseco UL/ULC ESH1229/1229HTR polycarbonate covers.
The candela output shall be field selectable, having a dual setting of 15cd or 30cd output.
The signaling strobe shall operate on 24V DC from a non­coded regulated DC supply or full ­wave rectified, unfiltered supply.
The strobe shall be designed to produce one signal fl ash per second with continuously applied minimum voltage.
The strobe shall have a universal back mounting plate, capable of wall mounting to a back box.
When strobe synchronization is required, the strobe shall be compatible with Amseco SMD10-3A (daisy chain) or other source of Amseco sync protocol.
Visual signaling devices shall be installed in accordance with current NFPA guidelines.

WARNING
Strobes must be used only on circuits with continuously operating voltage.
DO NOT use strobe on coded or interrupted circuits in which the applied voltage is interrupted ON and OFF as the strobe may fail to flash.
The applied voltage must be within its rated input voltage range.
Fuse ratings on signaling circuits must handle peak currents from all devices connected to those circuits.

Installation

Installation Instruction

Wiring Diagram

Wiring Diagram

Dimensions: inches (mm)

Dimensions
Dimensions

Sound Output Dispersion Horizontal dB Vertical dB
DEGREES +90 -6
+60 -2 -2
+30 -1 -1
0 0 0
-30 -1 -3
-60 -2 -5
-90 -6 -6
Strobe Light Specifications Max. RMS Operating Current
--- ---
Regulated 24V DC Regulated 24V FWR
15cd 83 120
30cd 128 175
Under ULC 525/526 ULC Current at 24V DC (mA)
--- ---
15cd 99
30cd 129
UL Required Minimum Light Output Horizontal Vertical
--- --- ---
DEGREES 15 cd
0 75.00 75.00
5-25 13.50 27.00
30 11.25 22.50
35 11.25 22.50
40 11.25 22.50
45 11.25 22.50
50 8.25 16.50
55 6.75 13.50
60 6.00 12.00
65 5.25 10.50
70 5.25 10.50
75 4.50 9.00
80 4.50 9.00
85-90 3.75 7.50
Compound 45 3.60 7.20

CUSTOMER SUPPORT

Potter Electric Signal Company
2081 Craig Road, St. Louis, MO, 63146­4161
Phone: 800­325­3936/Canada 888­882­1833
Web: www.amseco­kai.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals