Harry Potter Ri-210HP WALKIE TALKIES Installation Guide
- June 7, 2024
- Harry Potter
Table of Contents
WALKIE TALKIES
Model: Ri-210HP
Important Message to Consumers
Thank you for purchasing one of our top-quality electronic products. Please
take a moment to read through these instructions to help you understand the
safe and proper way to use this toy to extend its usability.
Keep these instructions for future reference as they contain important
information.
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are
potentially dangerous for the environment and human health due to the presence
of hazardous substances.
Installing the Batteries
Note: Batteries should always be installed by an adult.
- Using a Phillips screwdriver, open the battery compartment door located on the bottom of the unit.
- Insert 2 AAA (R03) batteries into each Walkie Talkies with + and – terminals as indicated in the compartment.
- Replace battery compartment door. Do not overtighten screw.
Battery Installation
Battery Use Cautions and Tips for Safety & Best Performance
- Only use the recommended/supplied batteries or equivalent.
- Use alkaline batteries for longer life.
- Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries.
- Insert batteries with proper polarity (+/–) as indicated.
- Remove exhausted batteries from product.
- Recharge rechargeable batteries under adult supervision.
- Do not attempt to recharge non-rechargeable batteries.
- Do not open batteries or heat them beyond normal ambient temperatures.
- To prevent battery leakage or damage remove batteries from a product if it will not be used for a month or longer.
- Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in contact with eyes, IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least 30 minutes. If skin contact occurs, wash skin with clear water for at least 15 minutes. Seek medical attention if any symptoms occur.
- Store in cool, dry, ventilated area away from hazardous or combustible material.
- Do not dispose of batteries in the household trash or fire.
- Follow applicable laws and local regulations for the disposal and transportation of batteries.
- Rechargeable batteries are to be removed from the toy before being charged.
- The supply terminals are not to be short-circuited.
- Do not dispose of batteries in fire; batteries may leak or explode.
- Batteries should be replaced by an adult.
- Remove all packaging before giving to your child.
Turning On/Power Off
- Turn the Power/Volume Knob right (clockwise) to turn on the Walkie Talkies. The Power LED will light to indicate unit is ON.
- Both Walkie Talkies must be turned on in order to send and receive messages.
- Turn the Power/Volume Knob left (counterclockwise) to shut off the Walkie Talkies.
Speaking
Press and hold the Talk Button while speaking into the Microphone. Release Talk Button to listen. Adjust volume using Power/Volume Knob.
You Should Know
For clear transmission, keep the antenna pointing upwards and the microphone
approximately two inches from your mouth.
Listening
- Both Walkie Talkies must be turned on and have their antennas pointing upwards in order to send and receive messages (speak and listen).
- Messages cannot be received while the Talk Button is being pressed. Release the Talk Button to listen.
- Messages can be heard through the Speaker.
Playing Games
Walkie Talkies can be used for all kinds of fun games and activities. Here are two suggestions:
Hide and Seek
Just like regular Hide and Seek, but with a twist: the “Hider” can send clues
to the “Seeker” using the Walkie Talkies.
Mystery Sounds
Can you recognize the mystery sound? One kid sends a sound over the Walkie
Talkies, while another tries to guess what the sound is. Examples can include
an animal, song, TV show, or anything else!
Troubleshooting
If you experience any of the following problems please insert 2 fresh new AAA (R03) batteries into each unit.
- If one or both of the Walkie Talkies do not work, this may indicate that the batteries are weak.
- If the signal range of the Walkie Talkies decreases notably, this may indicate that the batteries are weak.
Please keep in mind that this product does not transmit well through obstacles
such as trees, buildings, and metal structures.
If there is a sizable increase in static, it may be due to the proximity of
electric motors, fluorescent lights, power lines, or other signal-disrupting
objects. You may have to change your location.
If problems persist, DO NOT ATTEMPT TO REPAIR THE UNIT. See the Warranty
for factory services.
Maintenance
It is important to keep the Walkie Talkies as dry and clean as possible. You may clean the cabinet with a cloth or sponge moistened with mild soap and water. Do not attempt to use strong cleansers or solvents, as they may cause damage.
Questions or Comments
For questions or comments regarding this or other ekids products, please call our toll-free number: 1-888-TOP-TOYS Also visit our website: www.ekids.com
If problems persist, please do not attempt to repair unit; see warranty for factory service.
Questions? Visit www.ekids.com
For any other questions: 1-888-TOP-TOYS Toll Free
1299 Main Street Rahway NJ 07065
TM & © Warner Bros. Entertainment Inc. (s17)
All Rights Reserved.
EC Declaration of Conformity
1 | Identification Number: Ri-210HP.UFXv9 |
---|---|
2 | Name and address of the manufacturer: |
Company: eKids, LLC / KIDdesigns, Inc. |
Address: 1299 Main Street, Rahway, NJ 07065, USA
3| The declaration of conformity is issued under the sale
responsibility of KIDdesigns, Inc.
4| Object of the declaration:
| Product Description:| Harry Potter Wizarding World Walkie Talkies| (Add
Product Image here)
| Product Color:| Black, Tan, Red & Gold
| Product Size:| +/- 35mm (D) x 171.2mm (H) x 71.2mm (L)
5| The object of the declaration described in 4 is in conformity with
the relevant Community harmonization legislation listed below:
– Toy Safety Directive 2009/48/EC
– The UK Toy (Safety) Regulations Requirement
– Radio Equipment Directive 2014/53/EU
– RoHS Directive 2011/65/EU Annex II & amendment (EU) 2015/863
– EMC Directive 2014/30/EU
– Packaging Directive 94/62/EC
– WEEE Directive 2012/19/EC
– REACH Regulation (EC) No. 1907/2006 & amendments (EU) No. 1272/2013; No.
552/2009; (EU) 2018/2005
6| Relevant harmonized standards used are listed below:
– ETSI EN-301 489-1 V2.2.3: 2019 / ETSI EN-301-489-17 V3.2.2: 2019
– EN71-1: 2014 +A1:2018
– BS EN71-1: 2014 +A1:2018
– EN71-2: 2011+A1: 2014
– BS EN71-2: 2011+A1: 2014
– EN71-3: 2019
– BS EN71-3: 2019
– BS EN IEC-62115:2020 +A11:2020 Safety of Electric Toys
– EN-300 328 V2.2.2 (2019)
– ETSI EN 300 220-2 v3.2.1:2018 / ETSI EN 300 220-2 v3.1.1:2017
– EN55032:2015/A11:2020
– EN 55035:2017/A11:2020
– EN-60825-1
– BS EN-60825-1
– EN-62479:2010
– EN IEC 61000-3-2:2019
– EN 61000-3-3:2013+A1:2019
– EN 62368-1:2014+A11:2017
7| Additional information:
The object of declaration is in conformity with the following standards /
regulations:
– REACH Phthalates : ANNEX XVII Entries 51 & 52
– REACH Cadmium : ANNEX XVII Entry 23
– REACH PAH’s : ANNEX XVII Entry 50
For and on behalf of SDI Technologies Inc.
David Stetin
Product Safety and Compliance Officer
Place of issued: Rahway, NJ
Date of issued: May 21, 2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>