POTTER 8830050 WPBB Outdoor Enclosure Outdoor Enclosure Owner’s Manual
- October 29, 2023
- POTTER
Table of Contents
POTTER 8830050 WPBB Outdoor Enclosure Outdoor Enclosure
WPBB Outdoor Enclosure
Features
- ANSI/UL 464 listed
- Black box with side mount tabs
- Made of clear Lexan® providing maximum visibility and reliability
- Unit Dimensions: 5.75″ (14.61 cm) high x 4.75″ (12.10 cm) wide x 4.18″ (10.62 cm) deep
- 3/4″ conduit knockouts
- Reinforcement steel hardware
- Outdoor resistant gasket
- Available in red or off-white
Description
The Potter WPBB Outdoor Enclosure is ANSI/UL 464 listed for use in indoor and outdoor applications when used with the Potter EH Series horn and Outdoor Series strobe and horn/strobe.
WPLPBB Outdoor Enclosure
Features
- ANSI/UL 464 listed
- Back box with outdoor resistant seal for mounting to wall
- Made of clear Lexan® providing maximum visibility and reliability
- Unit dimensions: 5.75″ (14.61 cm) high x 4.75″ (12.10 cm) wide x 3.25″ (8.255 cm) deep
- 3/4″ conduit knockouts
- Reinforcement steel hardware
- Outdoor resistant gasket
- Available in red or off-white
Description
The Potter WPLPBB Low Profile Outdoor Enclosure that creates a surface mount
look, is ANSI/UL 464 listed for use in indoor and outdoor applications when
used with the Potter EH Series horn and Outdoor Series strobe and horn/strobe.
WPBB AND WPLPBB NOTES:
- Product does not meet ANSI/UL 1971 light distribution requirements
- To allow for drainage, the seal on the bottom edge is not water tight
SPKRBB Outdoor Enclosure
Features
- ANSI/UL 464 listed
- 1/2″ conduit knockouts with metal washer reinforcement
- Wiremold knockouts for 500, 700 Series and pendulum mount
- Unit Dimensions: 6.20″ (15.75 cm) square x 2.04″ (5.18 cm) deep
- Reinforcement steel hardware
- Outdoor resistant gasket
- Available in red or off-white
Description
The Potter SPKRBB Outdoor Back Box is constructed of durable plastic is ANSI/UL 464 listed for use in indoor and outdoor applications when used with the Potter Series speaker and speaker/strobe.
AVBB Surface Back Box
Features
- ANSI/UL lsited for indoor use
- 1/2″ conduit knockouts with metal washer reinforcement
- Wiremold knockouts for 500 and 700 Series
- Unit Dimensions: 5.57″ (14.15 cm) high x 4.55″ (11.56 cm) wide x 1.47″ (3.73 cm) deep
- Screw heads hidden
- Available in red or off-white
Description
The Potter AVBB Surface Back Box is constructed of durable plastic and is fully compatible with the wall mount horns, strobes, and horn/strobes.
Alert & Agent Bezels
Features
- Easy to install
- ALERT or AGENT wording on both sides of bezel
- Available in red or off-white
Description
The Potter ALERT and AGENT bezels are constructed of durable plastic and is fully compatible with the wall mount horns, strobes, and horn/strobes.
CLNGBB Ceiling Surface Back Box
Features
- ANSI/UL listed for indoor use
- 1/2″ conduit knockouts with metal washer reinforcement
- Wiremold knockouts for 500, 700 Series and pendulum mount
- Unit Dimensions: 6.2″ (15.75 cm) round x 1.67″ (4.24 cm) deep
- Screw heads hidden
- Available in red or off-white
Description
The Potter CLNGBB Surface Back Box is constructed of durable plastic and is
fully compatible with the ceiling mount strobes and horn/strobes.
Potter Electric Signal Company, LLC St. Louis, MO 63042 USA Cust Service: 866-572-3005 Tech Support: 866-956-0988 Canada 888-882-1833 www.pottersignal.com