POTTER PVX-RM8-RM16 Remote Microphone With Select Switches Owner’s Manual
- June 9, 2024
- POTTER
Table of Contents
POTTER PVX-RM8-RM16 Remote Microphone With Select Switches
PVX-RM8/RM16 Remote Microphone With Select Switches
Features
- Combines Remote Mic and control switches in a single cabinet
- 6 conductors carry Power, Audio and Control
- Up to 31 PVX-RM8 units in a system
- Compact design for ease of installation
- Compatible with PVX-100M / 200M Mass Notification Systems
- Product includes a 5 year warranty
- Made in the USA
Description
The PVX-RM8 is compatible with PVX 100M / 200M Mass Notification systems. System integrity is constantly monitored to insure reliable performance when critical conditions demand instant communications. The microphone provides crystal clear live voice instructions over the system speakers. Control switches provide the ability to activate pre-recorded messages/tones for emergency conditions from a remote location. The switches may also be used for selective speaker zone control or control functions when used in conjunction with a PVX-OL8 output card.
Application
The Potter PVX-RM8 is a supervised remote microphone station with the addition of control switches for message activation, zone selection or control functions. It performs the functions described for an LOC (Local Operating Console) for Mass Notification Systems.
Technical Specifications
| Power | 24 VDC |
|---|---|
| Standby Current | 12mA standby |
| Active Current | 36.5mA active |
| pVX-RM8 | 8” wide x 10” high x 3” deep |
| pVX-RM16 | 10” wide x 14” high x 3” deep |
Remote Microphone with Switches
Model Number| Stock Number| Description
pVX-RM8| 3510030| Remote Microphone with 8 switches
pVX-RM16| 3510031| Remote Microphone with 16 switches
- For larger switch configurations, consult factory
Mass Notification Audio
- PVX-RM8 is listed to UL2572 Mass Notification Systems when used in conjunction with the PVX- 100M or PVX- 200M systems.
- Microphone operation is typically All-Call, but switches may be assigned to Zone select when the EVX-ZM Zone Module is installed.
- Select switches may also be used to activate messages/tones for emergency or operational conditions.
- Message priority is assigned in programming. Typically highest priority message is assigned to switch number 1, next lower priority to 2 and so on.
- Additional Switches can be added and programmed for Output Control.
- Maximum number of switches in the EVAX 100M / 200M is 32.
Potter Electric Signal Company, LLC
St. Louis, MO
Tech Support: 866-956-1211 / Customer
Service: 866-572-3005
www.pottersignal.com
firealarmresources.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>