POTTER SHB-SLB24-75 Indoor-Outdoor Strobe-Horn-Strobe Combination Owner’s Manual
- June 9, 2024
- POTTER
Table of Contents
SHB-SLB24-75 Indoor-Outdoor Strobe-Horn-Strobe Combination
Owner’s Manual SHB/SLB24-75
INDOOR/OUTDOOR STROBE/
HORN/STROBE COMBINATION
SHB-SLB24-75 Indoor-Outdoor Strobe-Horn-Strobe Combination
- Unit by itself is UL Listed for outdoor use
- Low current consumption
- Wide operating voltage range
- AWG #12-18 lead wire connection
- Clear lens only
- Synchronization requires the SMD10-3A Sync Module
- Capable synchronization with other Maseko strobes
- Mounts to SBX-1 outdoor box or SBP-1 plastic mounting plate
- Available in red and gray housing
Asteco’s SHB/SLB indoor and outdoor strobe and horn/strobes are designed to
provide audible and/or visible signals for fi re and burglar alarm protection
systems and notification signals for the purpose of life safety and
protection. They meet or exceed NFPA/ANSI Standards. The unit by itself is
approved as an outdoor appliance under UL 1638 (strobe) and UL 464 (horn).
The SHB/SLB24-75 Series operates on 24V system panels having an output voltage
of either DC or FWR between 16-33V. These audible/ visual signals can be
connected either independently or in unison. It can be synchronized by using
the Maseko Sync Module SMD10-3A. The horn for the SHB24 can be silenced while
the strobe remains flashing.
The SLB24-75 Series is a high performance, high intensity, solid state,
indoor/outdoor, 24V DC strobe.
Ordering Information
Model Number| Input Voltage| Operating Voltage Range| Strobe Output (cd)|
Installation| Flash Rate| Mounting Type| Sync Module| Operating Temperature
Range
---|---|---|---|---|---|---|---|---
SHB24-75C| Regulated 24V DC/ FWR| 16-33 VDC
16-33 VFWR| 75| Indoor (Fire/ADA)| 60 times/ min.| Wall| SMD10-3A| -31°F –
150°F (-35°C – 66°C)
SLB24-75C| Indoor/outdoor (General)
Engineering Specifications
The indoor/outdoor audible and visual alarm indicating appliance shall be Maseko model SHB24-75 or equivalent device. The indoor/outdoor visual alarm indicating appliance shall be Asteco model SLB24-75 or equivalent device. The horn/strobe shall be listed under UL 1971 Standard for signaling devices for the hearing impaired and shall be approved for fi re protective service. The horn/strobe and strobe shall be listed in compliance with UL 1638 Visual Appliance Private Mode Emergency and General Utility for use in indoor/outdoor applications. The candela output shall be field 75cd intensity output. The signaling strobe shall operate on 24V DC from a non-coded, regulated DC supply or full-wave rectified, unfiltered supply. The horn may operate on 24V DC coded system. The strobe shall be designed to produce one signal flash per second with continuously applied minimum voltage. The strobe/horn may have a SPC-1 universal back mounting plate, capable of wall mounting to a SBX-1 weather- proof back box. When strobe synchronization is required, the strobe/horn shall be compatible with the Asteco SMD10-3A (daisy chain) or other source of Maseko sync protocol. Audible and visual signaling devices shall be installed in accordance with current NFPA guidelines.
Installation
Wiring Diagram
Dimensions: inches (mm)
Specifications
| Under CAN/ ULC 525/526 | ULC Current (mA) |
|---|---|
| 24V DC | 24V FWR |
| SHB24-75 | 144 |
| SLB24-75 | 110 |
| Maximum RMS Operating Current (mA) | Minimum Sound Output (dB @ 10 ft per UL |
| 464) | Light Output on Axis (cd) |
| --- | --- |
| SHB24-75 | Regulated 24V DC |
33V
Horn| 36| 34| 83| 79| ****
104
| ****
118
Horn and Strobe| 195 (typical 145)| 254 (typical 204)
Strobe| 175| 239| –| –
SLB24-75|
Strobe| 167| 223| –| –
Potter Electric Signal Company
2081 Craig Road, St. Louis, MO, 63146-4161
Phone: 800-325-3936/Canada
888-882-1833
www.amseco-kai.com
PRINTED IN USA
MKT. #8850019 – REV B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>