POTTER SL-5 SERIES Conical Strobe Lights Owner’s Manual

: June 9, 2024
: POTTER

Table of Contents

POTTER SL-5 SERIES Conical Strobe Lights
DESCRIPTION
Engineering Speciﬁcations
Dimensions
Surface Mounting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

POTTER SL-5 SERIES Conical Strobe Lights

SL-5 SERIES
CONICAL STROBE LIGHTS

Designed to meet UL 1638 Visual Appliance Private Mode
Polarized using ﬁ ltered DC or unﬁ ltered FWR input voltage
12 and 24V DC models
Solid state circuitry and a xenon ﬂ ash tube
Impact resistant black abs base
Interchangeable polycarbonate lens
UL listed AWG#18 wire leads 10.6” long
Optional surface mount plate model SP-SL1B
Replacement interchangeable lens model SL-LG

DESCRIPTION

The SL-5 series strobes are a high performance, high intensity, solid state strobe, designed for applications where 360° visual annunciation is required. The strobe light is UL 1638 approved and is listed for general utility signaling. The strobe is polarized for connecting to supervised circuits and is designed with a xenon ﬂ ash tube. The SL-5 is a high proﬁ le strobe with a low current draw of 250mA at 24V DC. The strobe can be used as a stand alone or in combination with other signaling devices to provide a visual veriﬁ cation signal. The SL-5 series strobes are recommended for use in areas such as: parking facilities, schools, corridors, apartments, ofﬁ ce buildings, restaurants, hotels, and any other application where effective visual warning is required. Installation must comply in accordance with applicable standards and/or all state and local electrical codes and authority having jurisdiction . POTTER-SL-5-SERIES-Conical-Strobe-Lights-fig-2

Model Number

| ****

Stock Number

| ****

Input Voltage

| ****

Strobe Lens Color

| ****

Average Current Amps

| ****

Rush Current Amps

| ****

Flash Rate (Flash/Min.)

| Operating Temperature Range
---|---|---|---|---|---|---|---
SL-5 12A| 4670021| 12V DC| Amber| 0.500| 1.0| 50-90| ****

14°F – 122°F

0°C – 49°C

SL-5 12B| 4670022| 12V DC| Blue| 0.500| 1.0| 50-90
SL-5 12C| 4670023| 12V DC| Clear| 0.500| 1.0| 50-90
SL-5 12R| 4670024| 12V DC| Red| 0.500| 1.0| 50-90
SL-5 24A| 4670009| 24V DC| Amber| 0.250| 0.5| 50-90
SL-5 24B| 4670010| 24V DC| Blue| 0.250| 0.5| 50-90
SL-5 24C| 4670011| 24V DC| Clear| 0.250| 0.5| 50-90
SL-5 24R| 4670012| 24V DC| Red| 0.250| 0.5| 50-90

Engineering Speciﬁcations

The visual alarm indicating appliance shall be Amseco model SL-5 or equivalent device.
The strobe shall be available in amber, blue, clear, and red lens.
The strobe shall be listed in compliance with UL 1638 Visual Appliance Private Mode Emergency and General Utility for use in indoor applications.
The signaling strobe shall operate from a non-coded regulated DC supply or full wave rectiﬁ ed, unﬁ ltered supply.
The signaling strobe shall be designed to produce a signal ﬂ ash of 50-90 ﬂ ashes per minute with continuously applied voltage.
The strobe shall be capable of surface mounting to a 4” square box using Amseco’s SP-SL1B plate.
Visual signaling devices shall be installed as per plans and speciﬁ cations.