GEORGE KOVACS P1212-287-L Tune LED Outdoor Wall Sconce Instruction Manual

June 9, 2024
GEORGE KOVACS

GEORGE-KOVACS-P1212-287-L-Tune-LED-Outdoor-Wall-Sconce-
logo

GEORGE KOVACS P1212-287-L Tune LED Outdoor Wall Sconce

GEORGE-KOVACS-P1212-287-L-Tune-LED-Outdoor-Wall-Sconce-product-
iamge

INSTALLATION INSTRUCTIONS

Item# P1212 / P1213
READ AND SAVE THESE INSTRUCTIONS

WARNING ! SHUT POWER OF FAT FUSE OR CIRCUIT BREAKER .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

ASSEMBLING THE FIXTURE (Fig.1)

GEORGE-KOVACS-P1212-287-L-Tune-LED-Outdoor-Wall-
Sconce-02

  1. Shut off power at the fuse box or circuit breaker. If necessary, remove the old fixture including the mounting hardware.
  2. Carefully remove the fixture from the carton and check that all parts are included as show in Figure 1.
  3. Loosen screws (C) and separate mounting plate (A) from back plate (D).
  4. Attach mounting plat (A) to the junction box with junction box screws (B) (size: 8-32*1/2”L).The side of the mounting plate marked “GND” must be face out.
CONNECTION THE WIRES (Fig. 2)

GEORGE-KOVACS-P1212-287-L-Tune-LED-Outdoor-Wall-
Sconce-03

  1. Connect the electrical wires as shown in Fig.2, making sure that all wire nuts are secured. If your outlet has a ground wire (green or bare copper), connect the fixture’s ground Wire to it. Otherwise, connect the fixture’s ground wire directly to the circular strap using the green screw provided. Tuck the wire connections neatly into the junction box.
FINISHING THE INSTALLATION (Fig. 1)
  1. Align back plate (D) onto mounting plate (A) and secure with screws (C).
  2. To prevent moisture from entering the outlet box and causing a short circuit, use clear caulking (i.e. Indoor/Outdoor silicone sealant) to outline the outside of fixture back plate where it meets the wall leaving a space at bottom to allow moisture a means to escape (Fig.3).
    GEORGE-KOVACS-P1212-287-L-Tune-LED-Outdoor-Wall-
Sconce-04

Your installation is now complete. Return power to the junction box and test the fixture.

CAUTION /ATTENTION: When handling the fixture, do not apply pressure to the LED. Hold the fixture by the base or back plate (D) only.

IMPORTANT: Fixture should be installed by a qualified electrician to ensure proper wiring and installation.
Dimmable with C-L (CFL & LED) type and Incandescent/Halogen type dimmers

GEORGE-KOVACS-P1212-287-L-Tune-LED-Outdoor-Wall-
Sconce-01

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

GEORGE KOVACS User Manuals

Related Manuals