VBESTLIFE SZC06 50A DIN Rail Digital Ammeter User Manual
- June 9, 2024
- VBESTLIFE
Table of Contents
VBESTLIFE SZC06 50A DIN Rail Digital Ammeter User Manual
Ammeter Relay Button Description:
SET button; press and hold for 2 seconds to enter the setting mode, and then click to switch to the next parameter settings.
Left shift key; Click this key to move the cursor one bit to the left.
Down key; Press this key to decrement the value of the menu parameter.
Increase key; press this key to increment the value of the menu parameter.
+ Press these 2 keys for 2 seconds at the same time to set the range. (That is, the maximum display current value)
The transformer is 100/5A, set 100, 200A/5A, set 200, and so on…
Menu Function Description:
(Can set the upper and lower limit alarm, alarm return, alarm delay function)
Alarm Relay Wiring Diagram:
Instrument auxiliary power supply Current signal input
110-220V AC power supply
Current signal input
110-220V AC power supply Connect to the current transformer CT
Relay alarm output
Contact capacity
6A/250VAC; 6A/30VDC
Basic Functions:
The current smart meter is used for the measurement and display of a single current in an electrical circuit, and can be attached to a relay alarm output.
Alarm delay and alarm return can be set. Real time current monitoring, alarm output function.
Precautions:
- Before powering on, please reconfirm whether the auxiliary power supply, input signal, and wiring of the instrument are correct. (The corresponding value of the auxiliary power supply must be matched, otherwise the instrument will be burned out).
- Monitoring a single current, the transformer cannot pass through multiple routes at the same time, which will affect the measurement results.
- Contact capacity 6A/250VAC, 6A/30VDC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>