Hawk Dual-Mode Wireless Bluetooth Gaming Headset User Guide

Hawk Dual-Mode Wireless Bluetooth Gaming Headset User Guide

PRODUCT FUNCTION DIAGRAM

1. EQ
2. MFB (Multi-Function button)
3. MIC
4. Volume button
5. Power button
6. Indicator light
7. Type-C port

POWER ON AND OF

Power on

In the off state,press and hold the power button to power on.

Power off
Press and hold to power off in stand by or playing mode

Reset
Double tap+long press the power key to delete the history pairing data, and enter the pairing mode after restarting

Automatic power off
Pair search for 10 minutes, enter standby mode, wait for 15 minutes, and then power off

DONGLE CONNECT

When the headset is connected to dongle for the first time, it can only be connected to dongle after entering dongle pairing mode.
The headset enters the dongle pairing operation: tap+long press the power button; In non-Bluetooth mode, the key definitions of different mobile phones or system applications may be different.
Dongle doesn’t have a button. It starts up when it is plugged in.
When it starts up, it automatically enters into pairing, and the status light are as follows:

1. Connected: blue light flashes slowly;
2. Not connected: blue light flashes quickly;
3. In pairing: red and blue light flash alternately.

MFB KEY OPERATION

Control operation when playing music

Play/Pause:   Short press MFB key
Next Song : Double tap MFB key
Previous Song: Triple tap MFB key

Control operation when calling

Connect: short press
Call hanging up: short press
Call rejection: long press

Note:

The priority of call is higher than that of music playback, and MFB multi- function key definition such as three-party call is not supported (only valid in BT wireless music mode)

MIC OPERATION

On mute
Mute off
Mute control of internal and external microphones

EQ KEY OPERATION

EQ sound effect switching
Long press EQ in music mode
Long press EQ in game mode

RGB light effect switch, breathing
Short press EQ in any state

Note:

If Dongle is inserted, it will be paired with Dongle. After the pairing is successful, it will enter the game ultra-low delay mode (50ms); The headset can only enter the game mode after it is connected to Dongle. The headset without Dongle status is in bluetooth music mode; Enter the game mode, automatically switch to the game EQ, exit the game mode, and automatically switch to the music EQ

VOLUME KEY OPERATION

Volume down: Scroll down
Volume up: Scroll up

BLUETOOTH PAIRING

When power on,the headset will enter bluetooth music mode to automatically connect back.
Select 233621 HAWK in the Bluetooth list of the device. remark: a. When there is no connection record,the system automatically enters pairing.

b. When there is a connection record,power on and enter the back connection.Double-tap the power button to enter

INDICATOR DESCRIPTION

Indicator status:

Charging: the red light is always on
Charging is completed: the red light is off
Pairing: red and blue light flash alternately
Power on/off: the blue/red light is on for 1 second
Standby: the blue light flashes twice
Paired successfully: the blue light flashes slowly

SPARE PARTS

1. Dongle adapter
2. USB-A male to Type-C female adapter
3. USB-A male to Type-C male
4. power charging cable
5. microphone pole

APPLICATION SCENARIOS

1. The device supports ordinary bluetooth mode/game mode
2. It is applied to PC, MAC, PLAYSTATION, SWITCH and mobile phone connection
3. It supports BOOM-MIC pluggable analog wheat stalk. At the same time, a call analog MIC
4. Dongle is as a gaming headset accessory
5. Dongle is a Type-C interface, supporting digital audio input, equipped with a USB-A to Type-C adapter

a. At home:

b. when outside:

SPECIFICATION

1. Support music mode, game mode
2. Support PC, MAC, Playstation, Switch, mobile phone applications
3. External detachable microphone, can mute control
4. when the external microphone is not located, you can talk through the built-in microphone of the headset. Mute control
5. Support game mode/music mode switch

• Name： DUAL-MODE WIRELESS BLUETOOTH GAMING HEADSET
• Model： HAWK
• Sound generating unit: Drive size: 40mm,
• Magnet type: NdFeb
• Audio decoding: SBC, AAC
• Frequency response range: 20-20000HZ
• Charging port: Type C, 5V2A
• Battery charging (headset): charging 180 minutes
• Battery life: 50 hours
• Supported communication protocol: BT5.3
• Product frequency band: 2400MHz~2483.5MHz
• Maximum RF output power: 10dBm

© 2023 Shenzhen Grandsun Electronic Co.,Ltd. All rights reserved

Made in China.

ATTACHMENT DONGLE SPEC

1. Dongle does not need buttons. Plug in Dongle and enter game pairing search.
   Note: The headset will enter game mode only when the headset is connected to Dongle. If the headset is not in Dongle state, it is in bluetooth mode.

2. Dongle has an indicator light.
   Note: a. Fast flash is pairing search
   b. Slow flash is successful connection

3. After inserting Dongle，the Dongle enters the game pairing search, and the search time is unlimited.

4. In Dongle game mode, it can support uplink voice.

5. In Dongle game mode, it can answer incoming calls, automatically return to game mode after the call ends.

6. Dongle does not need to support normal Bluetooth mode to play music, only the game low latency mode.

7. a. Support simultaneous connection to Dongle and a mobile phone.
   b. At present, Dongle connection is the main setting. If Dongle plays audio, the audio on the mobile phone cannot be played on the headset. However, if the Dongle is not playing, the headset will play the audio of the mobile phone (you need to turn off or pause the PC player (Dongle) to play the music on the mobile phone)
   c. Although the connection is dominated by Dongle, if a call comes from a mobile phone, it will be forced to switch to the mobile phone. After the call is finished, audio playback on Dongle will resume.
   d. After the headset is turned on, the Dongle will be automatically connected back. The connection between the headset and the mobile phone must be connected back through the mobile phone.
   e. Some mobile phones can only power on dongle when the OTG mode is turned on.

INFORMATIONAL NOTE FOR CUSTOMERS IN U.S.A. ONLY NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and  used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

INFORMATIONAL NOTE FOR CUSTOMERS IN CAN. ONLY:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.”

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CAUTION

• replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types) ;
• disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
• a battery subjected to extremely low air pressure that may result in an explosion or the.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>