timberk T-HG2-Q15M Electric Fan Heater Instruction Manual
- June 9, 2024
- TIMBERK
Table of Contents
T-HG2-Q15M Electric Fan Heater Instruction Manual
Models:
T-HG2-Q15M
T-HG3-Q15M
Dear customer!
We thank you for your wise choice and for a purchase of an electric fan
heater. It will serve you for a long time.
IMPORTANT INFORMATION
Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include
all possible situations that you may experience using the device. The
manufacturer is not responsible for damage of the appliance or its parts
during transportation, as a result of incorrect installation or voltage
fluctuations, as well as when any part of the appliance has been changed or
modified.
NOTE
There is a label on the device which has all the necessary technical data and
other useful information about the device. Use the appliance only for the
purpose specified in this manual.
SAFEGUARDS
When using the device, a number of safety precautions must be observed. Improper operation by ignoring safety precautions can result in damage to the health of the user and other people, as well as damage to their property.
-
Read these instructions carefully before using the appliance to avoid damage during use.
-
Before starting up for the first time, check that the specifications on the product comply with the power supply specifications.
-
This appliance heats up to a very high temperature during operation. To avoid burns, do not touch the hot surfaces of the appliance with your hands and other parts of the body.
To prevent property damage from overheating, fire, or explosion:
Place the device at least 1 m from furniture, curtains, pillows, bedding, paper, clothes, and other flammable objects and materials;
Do not dry clothes, towels, or any other materials with the heater;
Allow the appliance to cool down before moving it. To move the device, use the built-in handle. -
Children must be supervised to prevent playing with the appliance.
-
If the device was at a temperature below 0ºC for some time, it must be kept at room temperature for at least 2 hours before turning it on.
-
Do not use the device outdoors or in high humidity areas.
-
The device is not intended for use by persons (including children) with reduced physical, sensory or mental abilities or in the absence of their life experience or knowledge, unless they are supervised or instructed on the use of the device by the person responsible for their safety.
-
Do not attempt to repair the device or change its parts by yourself. To repair the product, contact an authorized service center.
-
Do not use accessories that are not supplied.
-
To prevent risk of electric shock:
– Always disconnect the device from the power supply before assembling, disassembling and cleaning, or if you are not using it. There is little chance of electric shock from static voltage, even when the device is turned off.
– Never use the device in a situation where it may come into contact with water;
– Do not connect the appliance to the mains if its surface is wet;
– If the power cord or plug is damaged, to avoid danger, it must be replaced by the manufacturer, authorized service center, or similar qualified personnel.
– Do not plug or unplug the power cord from the outlet with wet hands. -
Any electrical appliance should be monitored, especially if there are children nearby.
-
Disconnect the power cord from the outlet before performing cleaning of the device, including wet dust cleaning from its surface.
-
When disconnecting the appliance from the mains, do not pull on the power cord, grasp the plug. Do not twist and do not wind it on anything.
-
Store the device in a cool or warm place.
-
The plug should fit into a standard Euro outlet and plug into it without much effort. If it is impossible to insert euro plug into an outlet or it is hard to do so, flip the plug vertically 180 degrees and try again. If even after that you cannot easily insert the plug into the outlet, call an electrician to replace the outlet. Never use the appliance if the plug is not fully inserted into the outlet.
-
The use of extension cords is not recommended. If this is necessary, try to use the shortest extension cord possible, with a conductor cross-section of the extension cord
not less than the cross-section of the core of the device cord. -
Do not use the device near explosive and flammable substances.
-
ATTENTION! DO NOT COVER THE DEVICE while it is operating. Do not dry clothes or any other fabrics and materials on it. This can lead to overheating, failure, or significant damage to you and / or your property.
ATTENTION!
The manufacturer considers this type of breakdown as a non-warranty case. -
Do not leave the appliance unattended for a long time.
-
Install the device only vertically on flat and dry surfaces.
-
Bad contact between the plug of the heater’s power cord and the electrical outlet can cause the plug to overheat.
-
The electrical cable of the device should not be crushed by furniture or be in places where it can be stepped on. Make sure that the power cord does not touch sharp edges or hot surfaces.
-
It is forbidden to operate the heater in rooms with a relative humidity of more than 93%, with explosive environment; high dust environment; chemically active environment that destroys metal and insulation.
-
Do not use the device in rooms with high humidity, near bathtubs, showers, pools, ponds and in places where there is a possibility of falling into water or splashing water or water drops on the device.
-
Do not place the device on unstable surfaces. It is forbidden to install the device near or under the electric socket or under a conducted electric cable. This can lead to overheating of them, which will create an emergency situation.
-
When turning off the heater, you must first turn off the heating element, leaving the working fan on for at least 30-60 seconds, and only after that completely turn off the device and unplug the power cord.
-
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may result in fire, electric shock, or personal injury.
-
CAUTION! Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are present. -
Statement: heater is not located immediately below a socket-outlet.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved
-
Сleaning and user maintenance shall not be made by children without supervision.
-
Children of less than 3 years should be kept away unless continuously supervised.
-
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
-
Warning! This heater is not equipped with a room temperature control device. Do not use the heater in small rooms where there are people who are not able to leave the
room on their own, unless they are constantly monitored. -
Explanation of warning signs:
Attention! Do not cover
APPOINTMENT OF THE DEVICE
An electric fan heater is intended for heating and ventilating spaces of the
room, for drying the air, walls and surfaces in the room.
Electric fan heaters are the best solution when carrying out construction
work, for heating warehouses and hangars, workshops and services, and also for
heating rooms and creating comfortable temperature during cold seasons.
The device is convenient to use and easy to install, economical to use due to
minimal energy losses, increased heat dissipation and efficient distribution
of air flow.
Depending on the power, the device can be used in domestic, industrial,
warehouse and service premises.
The main advantage of the electric fan heater is that it is able to create a
directed large warm airflow, providing fast and efficient heating of large
areas.
The electric fan heater has a sturdy external metal housing protected against
corrosion. Air is heated in the inner casing, when passing through the heating
elements, using a low-noise electric motor with a metal impeller, which takes
air through the holes in the air intake grille and blows it through the holes
in the air outlet. Additionally, the device is equipped with a temperature
limiter, which turns off the heating elements in case of overheating. The
device has a convenient handle for moving.
SPECIFICATIONS
Technical parameters
Technical parameters are indicated in table 1
Table 1
| Parameter | Unit | T-HG2-015M | T-HG34:115M |
|---|---|---|---|
| Rated power consumption | W | 2000 | 3000 |
| Power modes | W | 0/1000/2000 | 0/1000/2000/3000 |
| Rated current | A | 9. | 13 |
| Power supply | V/Hz | 220-240-150 | 220-240-150 |
| Moisture protection class | IP20 | IP20 | |
| Electrical protection class | – | Class I | Class I |
| Air consumption | m3/h | 100 | 180 |
| Duration of operation/pause | h | 22/2 | 22/2 |
| Device dimensions | mm | 165’215’260 | 250’205’300 |
| Net weight | kg | 1.8 | 2.6 |
DEVICE DESCRIPTION
**Fig. 1**
The appearance of the device may differ from the images in the manual
- Thermostat knob
- Power mode knob
- Body
- Front protection grille
- Rear protection grille
- Metal-ceramic heating element
- Base of the device
DELIVERY SET
- Electric fan heater – 1 pc.
- Instruction manual – 1 pc.
- Warranty card – 1 pc.
- Packaging – 1 pc.
ELECTRICAL CONNECTION
- Before connecting the device to the mains, make sure that the parameters of the power supply at the connection point correspond to the parameters indicated on the rating label with the technical data of the device.
- Connection the device to the electrical network should be carried out only by qualified specialists in accordance with “Rules for the installation of electrical devices” and “Safety Rules for the operation of electrical devices operating at voltages up to 1000V ~.”
- Before connecting the device, make sure that it is properly grounded. Proper grounding is important to minimize electric shock and fire danger.
Residual current device
WARNING!
In order to protect against electric shock, devices with electric heating can
be equipped with an RCD with a leakage current of 100-300 mA.
If the device is connected to the network through a residual current device
(RCD), operating according to the leakage current, and when it is turned on,
it trips, this may occur due to moisture in the insulation of the heating
elements. This is usually the result of long storage in wet conditions. This
cannot be considered as a malfunction and is eliminated by temporarily turning
on the device without an RCD. Drying can take from several hours to several
days. In order to avoid moisture accumulation during long breaks in operation,
it is recommended to periodically turn on the device for a short period time.
ATTENTION!
The electrical outlet must be enough for rated current of at least 10A (for
models up to 2000W), and at least 16A (for models with power higher than 3000
W).
OPERATION OF THE DEVICE
Control panel 2000 W
Control panel 3000 W
Power mode knob 2000 W
Used to select the following power modes: ventilation , low heating power (1),
high heating power (2).
Set the knob to “1” position to select 1000 W power mode
Set the knob to “2” position to select 2000 W power mode
3000 W
Used to select the following power modes: low heating power (1), medium
heating power (2), high heating power (3).
Set the knob to “1” position to select 1000W heating power mode
Set the knob to “2” position to select 2000W heating power mode
Set the knob to “3” position to select 3000W heating power mode
Thermostat knob
Used to set the room temperature.
The required air temperature in the room can be set in the range from 0 to +40
°С. In the heating mode of the device, turn the thermostat knob clockwise to
the stop, while if the room temperature is below the set temperature, the
heating elements should turn on. When the room temperature reaches the desired
level, turn the thermostat knob counterclockwise until the heating elements
turn off. The thermostat will now maintain the set temperature automatically
by turning the heating elements on and off while the fan motor is running. In
particularly cold weather, the appliance may not be able to fully heat the
room. In this case, set the thermostat to a level slightly higher than
desired.
Overheating protection
The appliance is equipped with a device for switching off the heating
elements in case of overheating of the case. Overheating of the case can occur
from the following reasons:
- the inlet and outlet protective grilles are closed by foreign objects or became very dirty;
- the thermal power of the device exceeds the heat loss of the room in which it works;
- Faulty fan motor.
After the emergency shutdown device is activated, the device automatically
turns on after 5-10 minutes.
ATTENTION!
Frequent triggering of the emergency shutdown device is not normal mode of
operation of the curtain. In case of constant triggering of the thermal
limiter, contact an authorized service center.
Turning Off
Turn the thermostat knob counterclockwise to the stop, let the device work for
3 minutes in ventilation mode, to cool down the heating elements, then set the
power mode knob to “0” position and unplug the device.
ATTENTION!
The first time the device is turned on, a specific odor and smoke may appear
(oil is burned from the surface of the heating elements). It is recommended to
turn on the device in heating mode for 10-20 minutes in a well-ventilated area
before installation.
MAINTENANCE
Before starting a cleaning, make sure that:
- Power mode switch is set to «0» («OFF») position and the unit is unplugged.
Recommendations for regular cleaning:
- Disconnect the unit from the mains by unplugging the power cord from the electrical outlet, allow the device to cool, then wipe it with a soft, slightly damp cloth.
- It is not recommended to use detergents, including abrasive compounds for cleaning
- Do not damage the surface of the device with sharp objects.
TROUBLESHOOTING
If it is impossible to fix these malfunctions with these methods, contact the authorized service center.
| Malfunction | Possible cause | Solution |
|---|
The device is connected to the network but doesn’t
work| No power| Check whether the power supply is disconnected from the device
and, if necessary, connect device to power supply
Defective operation mode switch| Contact an authorized service center
Defective motor
Low heating temperature is set on thermostat| Set the temperature higher on
Set by rotating the
handle clockwise
Faulty contact connection in wiring scheme of electrical circuit| Contact an
authorized service center or restore reliable contact connection
Temperature limiter parted electrical circuit and shut off the heating
elements| Ensure that the air inlet or outlet grille is not blocked by foreign
objects and wait for turning on of the temperature limiter, after the body of
the device cools down
Malfunction in circuit breaker| Change the circuit breaker
Power cord is broken| Contact an authorized service center to fix it
The room temperature is higher than the temperature set by the thermostat|
Turn the thermostat handle clockwise until the heaters turn on
The device is connected to electric network, heating
mode is set, the electric motor works, but there is no heating| Low heating
temperature is set on thermostat| Set the temperature higher on Set by
rotating the
handle clockwise
Temperature limiter parted electrical circuit and shut off the heating
elements| Ensure that the air inlet or outlet grille is not blocked by foreign
objects and wait for turning on of the temperature limiter, after the body of
the device cools down
Defective operation mode switch| Contact an authorized service center
Defective thermostat
Defective heating element
The room temperature is higher than the temperature set by the thermostat|
Turn the thermostat handle clockwise until the heaters turn on
Unnatural sound during operation of the fan, vibration| The fastening of the
fan parts has loosened| Fasten fan parts or contact an authorized service
center
UTILIZATION RULES
After the lifetime of the device expires, it should be recycled in compliance
with the laws, rules and methods in region of recycling. Detailed information
about the recycling of the device, you can receive from a representative of
the local authorities, after providing full information about the device. The
manufacturer and authorized organization of the manufacturer do not carry
responsibility for the fulfillment by the Buyer of the requirements of
legislation on utilization and methods of utilization of the device selected
by the Buyer. The lifetime of the device is indicated in the warranty card.
Warranty period for the device and warranty terms are specified in the
warranty card. The warranty card is an integral part of the documentation
supplied with this unit.
If there is no warranty card in the delivery set, ask for it from the Seller.
The warranty card provided by the Seller must conform to the manufacturer’s
form.
The manufacturer and the authorized organization of the manufacturer remove
responsibility for any possible harm which can be caused to people, animals or
property directly or indirectly, if this harm occurred as a result of
noncompliance with the rules and operating conditions, installation of the
device, intentional or reckless actions of the user- and / or third parties,
as well as in situations caused by natural and / or anthropogenic accidents.
TRANSPORTATION AND STORAGE
- During transportation, any possible impacts and movements of the package inside the vehicle should be excluded.
- Transporting and storage should be provided in strict accordance to the manipulation marks.
| Temperature Requirements* | Transportation and storage | From -30°C up to +50°C |
|---|---|---|
| Humidity Requirements* | From 15% up to 85% (without condensate) |
We are exploring new technologies and we constantly improving the quality of
our products.
That’s why specifications, design and accessories are subject to change
without any specific notice.
- This product must have storage in dry, well-ventilated space of warehouse at the temperature not lower than +5°C
Documents / Resources
|
timberk T-HG2-Q15M Electric Fan
Heater
[pdf] Instruction Manual
T-HG2-Q15M Electric Fan Heater, T-HG2-Q15M, Electric Fan Heater, Fan Heater,
Heater
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>