KINGSTON KASK210 Switch Button Instruction Manual
- June 9, 2024
- Kingston
Table of Contents
KASK210 Switch Button Instruction Manual
Instructions:
- Insert rubber washer on air switch threads, insert air switch through a 1-3/8″ hole on the counter top.
- From below, insert plastic washer and thread plastic nut until the air switch is properly fastened.
- Attach power module to the wall using the attached screws (2 flat screws on top, 1 pan head screw on the bottom)
- Insert small plastic nut on both ends of the air hose, push one end on the air inlet of the power module and the other end on the air outlet of the air switch, hand tighten both nuts to secure the air hose.
- Plug module into grounded outlet and plug garbage disposal into the B socket of the power module.
www.kingstonbrass.com
TOLL-FREE CUSTOMER SERVICE: 1-877-2-KBRASS
TECHNICAL SUPPORT
E-mail:service@kingstonbrass.com
12775 Reservoir Street, Chino, CA 91710
2022-07-T Kingston Brass
Documents / Resources
|
KINGSTON KASK210 Switch
Button
[pdf] Instruction Manual
KASK210 Switch Button, KASK210, Switch Button, Button
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>