savio TR-14 Car Transmitter and Charger with Bluetooth User Manual

savio TR-14 Car Transmitter and Charger with Bluetooth User Manual

(SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak. pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if youbelieve that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016

Information of the utilization of electrical and electronic equipment

This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protecion by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

Thank you for choosing Savio product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.

If there is something that we could improve on our products, please write to us at support@savio.net.pl

Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.

Device assembly

1. Put the plastic nut on the ball joint
2. Press the ball joint into the hole on the back of the device.
3. Secure it with the plastic nut.
4. Insert the clamp holder into the car vent. Secure thumbscrew in the car vent so that it does not move.

• Ⓐ Thumbscrew
• Ⓑ Clamp holder
• Ⓒ Ball joint
• Ⓓ Plastic nut
• Ⓔ Mounting hole

Device installation

1. Turn on the car radio and set frequency between 87.6 and 107.9 MHz, for which no signal is transmitted
2. Plug the SAVIO TR-14 FM transmitter into the cigarette lighter socket
3. Set the same frequency on the device as on the car radio (Check point no. 3).
4. Play music from Bluetooth or Micro SD card. If there is noise during playback, try setting a different frequency

FM frequency settings on the transmitter

1. Press the key for about 3 seconds to enter the frequency setting. When the LED screen starts flashing, you can proceed to change the frequency on the transmitter
2. Turning the potentiometer to the right side will increase frequency, turning to the left will decrease frequency

Package content

• SAVIO TR-14 transmitter
• User manual
• Jack 3.5 mm – Jack 3.5 mm cable

Product diagram

1. USB 20W– Quick Charge 3.0 output
2. USB-C 18W – Power Delivery 3.0 output
3. Lighter socket plug
4. Rotating microphone
5. LED screen, play / pause, answer / reject incoming call, FM frequency change
6. Potentiometer
7. Turn on / off Bass Boost and backlight function, source change
8. Turn on / off ENC function
9. Previous track / music management modes on Micro SD card
10. Next track, backlight colour change
11. Micro SD card slot
12. AUX output

Playing music via Bluetooth

1. Turn on the Bluetooth mode on the transmitting device (e.g. smartphone), then turn on the device search and select SAVIO TR-14 from the list. If transmitter has already been paired with this device, they will be connected automatically.
2. After proper connection with the device you will hear a characteristic sound confirming correct pairing.
3. Device is ready to use.

• If the device asks for a passcode, enter „0000” or „1234”

Playing music via Micro SD card

Inserting the Micro SD card into slot will automatically read and play it.

In case of problem with playing music, choose Micro SD card source by pressing button.

Playing music via AUX output

Pair the TR-14 device with Bluetooth.
Connect Jack 3.5 mm – Jack 3.5 mm to the AUX output in transmitter and car socket. Proper cable connection will automatically change source from FM to LINE-OUT.*
***** In case of problem with playing music set the AUX source in car radio.

Functional buttons description

button – during playing music:

• Single press to pause / resume playback.
• Turning the potentiometer to the right side will increase volume.
• Turning the potentiometer to the left side will decrease volume.

button – during calls (hands-free function):

• Single press to end the call.
• Press and hold to turn on private mode.

button:

• Single press cause on / off Bass Boost function. In addition, the screen will  show “b1” communicate, which informs that this function is active, communicate “b0” informs that the Bass Boost function is inactive.
• Pressing and holding this button allow to change playing source between Bluetooth / SD Micro card.
• Double fast press turn on / off backlight effect.

button:

• Single press during call turns on / off ENC function (noise reduction during calls).
• Press and hold to turn off / on the Bluetooth, FM functions and the display in the device (the charger function will still be available).

and  buttons:

• Single press to choose previous track.
• Single press to choose next track.
• Pressing and holding button for about 2 second will change backlight colour (Red / Green / Blue / Yellow / Purple / Light Blue /White / RGB wave).
• Pressing and holding allows to switch between the music managment modes for micro SD card. Press and hold to toggle between the music managment modes of the Micro SD card. The available modes are: ALL (tracks are played one by one), LOP (the selected track is looped and played continuously), SHU (tracks on the micro SD card are played one by one randomly).

Technical specification

• Bluetooth version: 5.0

• Supported Bluetooth protocols: AVRCP, HFP, A2DP

• Frequency bands in which the radio equipment operates:

• FM: 87.6 MHz – 107.9 MHz

• Bluetooth: 2400 – 2483.5 MHz

• Maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates:
  FM: 50nW e.r.p.
  Bluetooth: 4 dBm

• Power supply: 12-24V

• Output voltages for the Power Delivery 3.0 port: 5V⎓3A, 9V⎓2.22A, 12V⎓1.67A

• Output voltages for the USB Quick Charge 3.0 port: 5V⎓3A, 9V⎓2A, 12V⎓1.5A

• Supported file formats: MP3, WMA, APE, FLAC, WAV

• Cable length: 1.2 m

• Supports Micro SD cards: up to 64 GB

• AUX-OUT output: Yes

• Hands-free kit function (built-in microphone): Yes

• Bass boost function: Yes

Safety conditions

• Use the product in accordance with its intended use, as improper use may damage the product.
• Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
• The device should be cleaned only with a dry cloth.
• Independent repairs and modification result automatic loss of the warranty.
• Hitting or dropping may damage the product.

Warranty

The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.net.pl/en/service

Information for customers and contractors and communication regarding complaints:

Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU)  2016/679 of the European Parliament andof the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection

PRODUCER:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszów
www.savio.net.pl

References

• Strona główna - ELMAK Sp. z o.o.
• Strona główna - Savio
• Strona główna - Savio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>