lorelli 10390020001 Smart Toy Scooter Instruction Manual

lorelli 10390020001 Smart Toy Scooter

PARTS AND TOOLS

• Handlebar stem 1 pc. (position 1)
• Seat 1 pc. (position 2)
• Scooter body set 1 pc (position 3)
• Plate -1 pc.; Hexagon bolt M5x14 – 2 pcs.
• 1 pc Screw M5x60/24 and 1 pc square nut M5 for the seat (Position 5)
• Combined Tool (Allen key and X Screwdriver) 1 pc.{Position 6)
• Foot rest -1 pc. (Position 7)

IMPORTANT- READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING
 Read and follow all the warnings and instructions written in this manual before using the scooter! ! You shall read, follow or understand all the basic operational instructions and warnings stated in this manual, otherwise there is a serious risk of injures as a result of collisions, falls or loss of control.  The common sense and the good judgement are very important to avoid any accident or injury!  The product should be properly assembled by an adult! ! Never leave the child unattended! m, To be used only under the direct adult supervision! ‘.’lllf  Keep your fingers and toes away from all moving parts of the scooter! l I  Do not modify the product!  Protective equipment should be worn (helmets, gloves, knee-pads, elbow-pads). Not to be used in traffic. 20 kg max.  Maximum weight : 20 kg., Age: 3+ years!  The scooter shall be used with caution, since skill is required to avoid falls orcollisions causing injury to the user or third parties.  Before each use please inspect the suspension, the fastening and the fixing of the components and of the locking devices, because in the course of time they may lose their effectiveness.  Not suitable for children under 36 months. Small parts. Risk of falling. !lmages on the title page and in the instruction manual are only illustrative and may differ from the real product.

IMPORTANT NOTE AND ADVICES

• Use the product on suitable surfaces: flat, clean, dry and where possible away from other road users.
• Be very careful when riding on wet surfaces due to reduced wheels traction and braking action!
• Keep away from roads or where there is incoming traffic.
• Do not ride on slippery surface.
• Avoid riding on stairs as the scooter might overturn causing serious injuries.
• Use at least the following protective equipment: hand/wrist, knee, head and elbow protection.
• Please check that the steering system is correctly adjusted and that all connection components are firmly secured and not broken.
• Make sure that you are ready for use in order to avoid pitching or entrapment.
• Always wear shoes.
• Mechanism to reduce speed will get hot from continuous use, do not touch after braking!
• The product shall be use from only 1 person!
• The product is not intended for extreme sports!
• Please keep your feet on the scooter plate and never ride whit one single hand!

SERVICING AND MAINTENANCE

PLEASE NOTE, THE REGULAR MAINTENANCE ENHANCES THE SAFETY OF THE TOY SCOOTER.

• Please check and tighten periodically the self-locking nuts and other self-locking fixings as they may lose their effectiveness.
• Replace the bearings if they are outworn! WARNING! Bearings and wheels are consumable and will not be warranted!
• No modifications other than to the manufacturer’s instructions shall be made.
• It is advised to inspect and maintain the scooter before use.
• Do not keep the scooter under direct sunlight or in wet places for a long time. The scooter may be damaged.
• Clean the scooter periodically and keep it dry.
• It is advised to use periodically oil for lubrication.
• You may use damp cloth and a mild detergent for cleaning the product.
  

SAFETY RIDING

This scooter shall not be used on public highways. Otherwise you can cause a traffic accident. Death or serious injury can occur.

• Do not ride the product under the influence of alcohol, drugs or medicines.
• Avoid uneven pavements or pot-holes, as this may cause you to lose control of the scooter. Do not ride the scooter in bad weather conditions, like strong wind, heavy rain or snow. Please do not use the scooter or slow down the speed if the surface are poor.
• Don’t carry anything in your hand while riding the scooter. Always ride it with both hands. Avoid the using of earphones/ headphones as they may restrict your hearing.
• Do not wear loose/ hanging clothing or scarves, as they may get caught in the wheels. When you are riding near parked vehicles, look out for car doors which can be opened. Ensure that there are no broken components and that the locking devices are engaged. The product is intended for users 3+ years old 20 kg max.

BRAKING

Picture A6 .The rear wheel cover functions as a brake , apply the brake by stepping on the brake pedal (rear wheel cover).Before the first riding of your scooter it is recommended to train the applying of the brake
at various speeds and in an open area, free from people and objects.

IMPORTANT! Faster speeds require longer braking distances.Gradually press the brake mechanism with your fool. Sudden braking on low-traction surfaces ( wet ,sandy ) may cause wheel slips or falls.When the seat is mounted, the braking is by feet.

CHILD SAFETY

• Never leave the child unattended.
• Always check the product for any loose screws, nuts and bolts before letting your child ride it.
• Instruct your child how to ride the scooter safety and make sure your child is capable of riding it.
• Make sure your child wear protective equipment to avoid injuries incl. helmets, gloves, knee-pads, elbow­ pads.
• padsNever let your child ride the scooter on the road.

ASSEMBLY

Important! You have the opportunity to choose from 5 height adjustment options of the seat. The following combinations are possible: C+2, B+1, B+2 A+1, A+2 (see Photo A2).

• Put the handlebar stem through the hole in the foot rest
• Put the handlebar stem through the provided hole on the scooter’s body, press the locking button and press down the stem until you hear a “Click” sound (Picture A 1)
• Insert by pressing the front of the seat on the desired height position (Picture A3) and then mount the seat to the handlebar stem with a bolt and nut ( B5). Insert the support leg on the desired position under the seat, mount the plate with the bolts (picture A4) using the tool provided (B6).

HEIGHT ADJUSTMENT

Step 1 – Make sure you release the locking mechanism. (Picture AS-1)
Step 2 Press the button (Photo A5-2) and select from the 3 positions by moving up or down.
Step 3 Make sure the locking mechanism is closed. (Picture A5-1)

REMOVING THE SEAT

Remove the seat from the steering stem (Picture A4) and then remove the metal seat mounting by 4pcs. screwdriver bolts ( Picture A8)

References

• Lorelli - Baby and children products with proven quality

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>