NEEWER PL81 LED Clip On Light Instruction Manual

NEEWER PL81 LED Clip-On Light

Product Overview

Neewer’s compact and simply designed PL81 LED fill light features 90 integrated LED light beads with dual color temperature and easy brightness adjustment. The light assembly is supplied with a 360° rotatable ball head which is well adapted for use on a camera, or an office computer screen, or various other types of applications.

Package Contents

• PL81 LED fill light ×1
• Adapter ×1: This adapter is only suitable for desktop monitors with a width of less than 20mm.
• Silicone diffuser ×1
• USB cable ×1
• Storage pouch ×1

Product illustration

Installation Instructions

1. Mounting on the computer
2. Unscrew the knob on the bottom of the adapter and clamp the bottom of the adapter anywhere on the edge of the PC screen. Tighten the knob to secure it.
3. Adjust the angle of the ball head of the adapter as required. Tighten the adjuster next to it to secure in position.
4. Align the screw on the top of the adapter to the hole under the adapter base of the LED fill light, and turn the screw to attach the LED fill light to the adapter.
5. Attach the silicone soft diffuser to the front of the LED lamp in the direction shown.
6. Mounting on the camera
7. Insert the LED light base into the cold shoe of another LED light and tighten the locking ring on the base to attach the two LED lights in series.
8. Insert the LED light base into the hot shoe of the camera, tighten the locking ring on the base to start using the light.

Powering on/off

• Long press the power button to turn the light on and off.
• With the light connected to a power source, the indicator will show the remaining power level.

Charging

• Connect the USB connector to an adapter and connect the other end to the USB port on the light. The indicator light will flash whilst charging, and stop flashing when fully charged.

Color temperature adjustment

• Slide the “cut” wheel to adjust the color temperature of the LED light from 2500K to 10000K.

Brightness adjustment

• Slide the “ DIM “ wheel to adjust the brightness level of the LED light.

Safety Notes

1. The product should not be used in an environment where the temperature exceeds 40℃.
2. The product should not be dropped to prevent damage to the light or its components which could result from a strong impact.
3. Please refrain from looking directly into the light which may result in eyesight damage.
4. The product should not be placed in an environment containing flammable or volatile substances.
5. When not in use, please keep the product in a well-ventilated, dry place away from heat sources and magnetic fields.
6. Do not use alcohol or liquid to wipe the light to prevent damage to the product.
7. Failure to follow all the steps and warnings listed in the manual will invalidate the warranty.

Product Specifications

Copyright

• 2021 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved.
• This document is the sole property of Shenzhen Neewer Technology Co., Ltd and shall not be, reproduced,transmitted, transcribed, stored in a retrieval system or translated in any form, by any means, without prior written permission from Shenzhen Neewer Technology Co., Ltd. Shenzhen Neewer Technology Co., Ltd reserves the right to change content in this instruction manual at any time and without prior notice.

Version Control

• Lingfeng Electronic (UK) Ltd
• International House, 10 Churchill Way, Cardiff, CF10 2HE, United Kingdom
• Shenzhen Neewer Technology Co.,Ltd.
• Room 1903, Block A, Lu Shan Building No. 3023 Chunfeng Rd Luo Hu District, Shenzhen Guangdong 518001, China

1. Name: PL81 manual
2. Size: 143*103mm
3. Material: 105g double-sided coated paper
4. Printing : four-color double-sided printing
5. Binding method: saddle stitch A total of 28P, the back cover is blank

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>