NEEWER NL480 Bi Color LED Panel Video Light Instruction Manual

: June 9, 2024
: NEEWER

Table of Contents

NEEWER NL480 Bi Color LED Panel Video Light
VERSION CONTROL
APPLICATIONS
SAFETY NOTES
FUNCTIONS
Installation steps
Warning
Product Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEEWER NL480 Bi Color LED Panel Video Light

Document Information
2021 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved. This document is the sole property of Shenzhen Neewer Technology Co., Ltd and shall not be, reproduced, transmitted, transcribed, stored in a retrieval system or translated in any form, by any means, without prior written permission from Shenzhen Neewer Technology Co., Ltd. Shenzhen Neewer Technology Co., Ltd reserves the right to change content in this instruction manual at any time and without prior notice.

VERSION CONTROL

APPLICATIONS

SAFETY NOTES

Do not use the product in the rain or an environment with high humidity.
Do not use in proximity of flammable or explosive substances.
Do not allow cables to sag which may cause a tripping hazard.
Please do not use alcohol or liquid to wipe the LED light.

FUNCTIONS

CONTROL PANEL

Adjusting cool and warm colors

Warm color
After turning on the power, turn the upper knob in the illustration to adjust the warm color from 0% to 100%.

Cold color
After turning on the power, turn the lower knob in the illustration to adjust the cold color temperature light from 0% to 100%.

CONTROL PANEL

Brightness adjustment
After turning on the power, turn the upper knob in the illustration to adjust the brightness from 0% to 100%.

Color temperature adjustment
After turning on the power, turn the lower knob in the illustration to adjust color temperatures from 3200K to 5600K.

Installation steps

Install the diffuser

Diffuser lock
Diffuser

Insert the diffuser into the light slot on the left, and lift up the diffuser latches at both ends to secure.

Attach the U-shaped Bracket
Attach the U-shaped Bracket on the LED light using the securing knobs and washers supplied.

Install the barn doors

Align the four 2 nuts with the screw holes of the lamp body, and then turn clockwise until they are locked.
Place the barn door frameon the front of the lamp body and align with the holes.
Align the screw with the hole, and then turn clockwise until it is secure.
Close up the barn doors.

Mount the bracket and adjust the angle of the barn doors as required

Turn the bracket fixing knob counterclockwise until it is released
Align the hole position with the bracket and turn the bracket adjuster until it is locked.
Use the securing knobs on both sides to loosen or tighten which will allow you to adjust the lamp body to a suitable position, and then secure it firmly.
You can also adjust the angle of the light or restrict the light zoneby deploying and adjusting the barn doors.

Warning

Please do not look directly at the light when in use as it may cause damage to your eyesight.
Do not obstuct the product heat dissipation vents with a cloth or any other object to prevent damaging the product.
Do not touch the light if your hands are wet to avoid serious injury.
Turn oft the power when not in use.
Do not modity the circuit or disassemble the product without permission.
Please use the adapter supplied with the accessories, or use a suitable compatible battery.
Failure to observe all steps and warnings detailed in the manual will void the warranty.