NEEWER SL90 RGB LED Video Light Instruction Manual
- June 9, 2024
- NEEWER
Table of Contents
NEEWER SL90 RGB LED Video Light
copyright
© 2022 Shenzhen NeewerTechnology Co., Ltd. All Rights Reserved.
This document is the sole property of Shenzhen NeewerTechnology Co., Ltd and
shall not be, reproduced, transmitted, transcribed, stored in a retrieval
system or translated in any form, by any means, without prior written
permission from Shenzhen NeewerTechnology Co., Ltd. Shenzhen NeewerTechnology
Co., Ltd reserves the right to change content in this instruction manual at
any time and without prior notice.
Product Overview
This is the Neewer SL90 RGB light comprising of 150 LEDs. Designed with a high-quality aluminum alloy shell, the light is sturdy and durable. Supporting EN 3 operation modes: CCT mode, Scene mode, and HSI mode, it can be remotely controlled by NEEWER’s user-friendly Infinity app. The light is powered using the integrated 4300mAh lithium battery, and includes an L-shaped swivel arm mounting bracket and a cold shoe adapter for a more flexible set-up.
Package Contents
Product Illustration
- CD Light panel
- L-shaped swivel arm mounting bracket
- Microphone hole
- Power/made button
- Brightness adjustment dial
- lnfinity/2.4GHz connection switch
- FX button/ Multi-function dial
- Type-C charging part
- Screen
- Long-press the FX button for5s to resetthe Infinity function.
Instructions
- Turn the 1/4 screw screw located on the adapter into the screw hole found on the LED light holder and tighten using the locking ring.
- Adjust the angle of the ball head adapter as required and secure using the adjuster.
- Slide the hot shoe base piece of the adapter into the camera’s hot shoe and tighten the base locking ring.
- The swivel mounting bracket allows you to adjust the angle of the LED light.
Turning on/off
Press and hold the power button for 2 seconds to turn on or off. The screen
will light up after the light is turned on.
Charging
Connect to a 5V 2A or 9V 2A power supply with the charging cable to charge the
LED light.
The charging cable can be connected to USB chargers, power banks, computers,
and other equipment. Please consider thatsomeequipmentmayhavea low power USB
output which will may result in longer charging times.
Brightness adjustment
Rotate the DIM dial to adjust the brightness from 0% ta 100%.
Color temperature adjustment
Short-press the /MODE” button to switch to CCT mode and then short-press the
FX button. When the” ” icon is pointed at the color temperature value, turn
the FX dial up and down to adjust the calartemperaturefrom 2500K ta 10000K.
Hue adjustment
Short-press the /MODE “button to switch ta HSI mode and short-press the FX
button. When the· icon is pointed at the “H” value, turn the FX dial up and
down to adjust the hue from Oto 360.
Saturation adjustment
Short-press the /MODE” button to switch to HSI mode and short-press the FX
button. When the” ” icon is painted at the “S” value, turn the FX dial up and
down to adjust the saturation from Oto 100.
Scenes
Short-press the” /MODE ” button to switch to FX mode and turn the FX dial up
and down to select the different scene modes. ****
Scene modes
Infinity mode
Move the “BT/2.4G” switch to the “BT” position for the light to enter Infinity
mode. You will now notice a flashing “ ,” icon on the screen. In order to
control the light using your Smartphone, please connect using the “NEEWER”
app. For detailed operating instructions, please scan the QR code of the “App
Guide Page” on the app prompt card.
Note:
Please ensure “NEEWER Infinity” is selected as the device connection mode.
- Please refer to the app manual for further information on how the app will help you to operate your device
- Please reset the Infinity function before connecting to the app. Long-press the” G FX O” button for 5s to reset.
2.4GHz connection mode
- Move the “BT/2.4G” switch to the “2.4G” position. You will notice that the” ” icon disappears from the screen. The light is now entering the 2.4GHz connection mode. Short-press the” /MODE” button ta switch to channel adjustment and turn the FX dial to adjust the channel from CH.OtoCH.9.
- When using the 2.4GHz connection mode, multiple LED lights can be set to the same channel, for example, CH8. The effect this has is that when the settings of one light are adjusted, those of all the other lights on this same channel will change in sync.
note
- Avoid dropping the product or exposing it to a strong physical impact.
- When in use, do not look directly at the light to prevent damage to your eyesight.
- Do not place the product near flammable or explosive materials.
- Do not use the product in the rain or in a humid environment.
- Please turn off the power when not in use.
- If the product is not to be used for an extended period of time, it should be kept in a ventilated, dry area away from heat and magnetic fields.
Specifications
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including lntelference that may cause undesired operation.
CAUTION: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>