timberk T-SHR40L Electric Shaver Instruction Manual

June 9, 2024
TIMBERK

INSTRUCTION MANUAL
ELECTRIC SHAVER
Model:

T-SHR40L
IM2022

Dear customer!
We thank you for your wise choice and for a purchase of this Timberk device. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.
NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

PRECAUTIONS

When using the electric shaver, please observe the following precautions. Improper operation while ignoring these precautions can result in an injury to the user and others, as well as damage to their property.

  1. Read the manual thorough fully and keep it for future reference.
  2. Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
  3. The appliance should be used only for domestic use in accordance with the present manual. The appliance is not intended for industrial use.
  4. Do not use outdoors.
  5. Always switch the appliance off before cleaning and when not in use.
  6. To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
  7. The appliance should not be used by persons with reduced physical, sensory or mental abilities (including children), or persons having insufficient skills or knowledge, without supervision or instruction of a person responsible for their safety.
  8. Children should be supervised to ensure that they do not play with the appliance.
  9. Do not leave the appliance switched on when you do not use it.
  10. Do not use other attachments than those supplied.
  11. Don’t use the device with the damaged power cord
  12. Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.
  13. Keep the cord away from sharp edges and hot surfaces.
  14. When unplugging the product, do not pull the power cord, but hold onto the plug. Do not twist it or wrap it around anything.
  15. Never insert any objects or liquids into openings in the appliance housing.
  16.  Do not put working appliance anywhere as it may lead to physical damage or material loss.
  17. Do not use the device with damaged parts -this may cause an injury.
  18. Do not throw the appliance into fire
  19. If the instrument is dirty, wipe it with a dry, soft cloth. Do not use abrasive cleaners, alcohol, gasoline
  20. Do not charge the device in a high humidity environment. Keep the charging port and device always dry.
  21. Do not use the device near explosive substances
  22.  It is recommended not to use the device while charging
  23. Do not wind the electrical cord around the appliance
  24. Do not use the appliance if the cord is damaged
  25. Turn off the device before charging
  26. Always put a protective cover on the working surface of the device when transporting it.
  27. The appliance must only be powered by safe extra low voltage marked on the appliance.
  28. This device contains non-replaceable batteries
  29. Do not charge the device for too long. Do not charge the device at temperatures below 0 C. Otherwise, it will reduce battery life. ºC or above 40º
  30. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  31.  Сleaning and user maintenance shall not be made by children without supervision.
  32. It is forbidden to wash this device with water
  33. WARNING! Always keep the device dry
  34. If the product has been exposed to temperatures below 0 °C for some time, keep it at room temperature for at least 2 hours before turning it on.
  35. Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.

timberk T SHF20L Electric Shaver-fig1

DESIGNATION

The device is intended to shave the beard, whiskers, moustaches.

SPECIFICATIONS

Specifications of the device are shown in Table 1.

Table 1

Parameter T-SHF20L
Power supply 5 V ****1 А
Charging time 1.5 hours
Working time 60 min
Battery Li-Ion  600 mAh
Rated power consumption 5 W
Electrical protection class III
Net weight 0.154 kg
Device dimensions 53×53х150 mm

DEVICE DESCRIPTION

timberk T SHR40L Electric Shaver-fig2

  1. Protection cover
  2. Shaving system
  3. ON/OFF switch
  4. Light indicator
  5. Cleaning brush
  6. USB cord
  7. Charging port
  8. Trimmer opening button
  9.  Built in trimmer

Fig 1*

  • The picture is for reference only and may differ from the actual product

DELIVERY SET

  1. Electric shaver – 1 pc.
  2. USB cord – 1 pc.
  3. Protection cover – 1 pc.
  4. Cleaning brush – 1 pc.
  5. Instruction manual – 1 pc.
  6. Packaging – 1 pc.

BEGINNING

Charging the device
Set the appliance switch to the OFF position before charging. Charging time is 1.5 hours. It is recommended not to leave the device plugged in for more than 24 hours. The indicator light will start flashing red.

timberk T SHR40L Electric Shaver-fig3

The device must be charged using the cable supplied. Connect one end of the cable to the charging port of the device, the other end to the adapter (not included). Then plug the adapter into an electrical outlet.

OPERATION

  1. Press the ON/OFF switch to turn on the appliance
  2. Move the working surface of the device over the skin in straight lines and in circular motions (Fig. 3)
  3. After shaving, put the protective cover on the working surface of the device to avoid damage to the device (Fig. 4)
  4.  Battery life 60 min – a month without recharging*
  5. Press the button on the back of the appliance – the trimmer will pop out

timberk T SHR40L Electric Shaver-fig4

  • With daily shaving for 2-3 minutes a day

CARE AND CLEANING

Cleaning and maintenance
To achieve the best possible shave, the device must be cleaned regularly.
The easiest and most hygienic way to clean the appliance is to wash the shaving head frame in running water after each use.
Be careful when using hot water to avoid hurting your hands. Cleaning every day: shaving system and hair compartment

timberk T SHR40L Electric Shaver-fig5

  1. Turn off the device, disconnect the charger from the device and the mains

  2. Open the shaving system and pull the shaving head frame up (Fig. 5)

  3. Clean the frame of the shaving heads under running water (Fig. 6)

  4. Clean the hair compartment with the cleaning brush.
    Make sure the shaving head frame and hair compartment are thoroughly cleaned.

  5. Replace the shaving head frame and shake off any remaining water.
    • Do not rinse the handle and hair compartment under running water, only the attachments can be washed under running water.
    • Do not use steel wool, abrasive cleaners or aggressive liquids such as benzene or acetone to clean the instrument.
    Do not wipe the work surface of the appliance with a towel or paper, as this may damage the work surface.

  6. Leave the shaving system open to dry (Fig. 7)

Changing blades, shaving heads
Blades and shaving heads retain their properties throughout the life of the product and do not require replacement if used correctly

STORAGE

Keep the appliance in a cool, dry place

REMOVING THE BATTERY

  • Battery should be removed from the appliance before its utilization
  • Unplug the appliance from mains socket and switch it off before removing the battery.

TROUBLESHOOTING

Malfunction Possible reason Solution
The appliance does not shave long hair The hair is too long Pre-trim long

hair with the precision trimming head and move the appliance against the direction of hair growth. Make sure that the appliance is fully in contact with the skin
The appliance does not work as well as it should| Hair may be stuck in the shaving head| Clean the shaving head (see chapter ‘Care and Cleaning ).
The battery is empty| Recharge the device
The appliance pulls out the hair.| You move the appliance too fast| Do not move the appliance too fast
The appliance works, but the result is
uneven| You press the appliance onto the skin too hard| Do not press the appliance onto the skin too hard, as this may cause the hair length after shaving to be shorter than the indicated hair length.
The shaving head is not in full contact with the skin| When you use the device, always make sure it
is fully in contact with the skin. Always move the appliance against the direction
of hair growth. As not all hair grow in the same
direction, this means that you have to move the
appliance up, down and sideways.
The appliance does not work| The battery is empty| Recharge the device
Skin irritation appears after shaving| Shaving head (shaving surface) defective or dull| Replace the Shaving head (shaving surface)
The skin is not accustomed to the new device| It takes approximately 2-3 weeks for the skin to
completely get used to the new device
The device is not charging| Ambient temperature is not correct| Do not charge the device at temperatures below 0
º C or above 40 ºC.
---|---|---
Usage time after fully chargedis less than
60 minutes| Engine load increases if shaving head
(shaving surfaces) has not been cleaned for long time| Clean shaving heads (shaving surfaces) and/or hair
compartment

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point. For additional information about actual system of the garbage collection, address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.
**** The symbol on the unit, packing materials and/or documentations means the battery used in this product not be toss in the garbage with ordinary household garbage.

www.timberk.ru

Documents / Resources

| timberk T-SHR40L Electric Shaver [pdf] Instruction Manual
T-SHR40L Electric Shaver, T-SHR40L, Electric Shaver, Shaver
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals