Fosmon C-10682 Indoor 24-Hour Mechanical Outlet Timer User Manual
- June 9, 2024
- Fosmon
Table of Contents
Fosmon C-10682 Indoor 24-Hour Mechanical Outlet Timer
Product Layout
To Program
There are 48 push buttons around the dial. Each is for a period of 30 minutes. When a push button is pressed down, the appliance connected to the timer will be on during that period of time. When a push button is lifted up, the appliance plugged into the timer will be off during that period of time.
To Set Time Of Day
Turn the dial clockwise for one full revolution then advance until the arrow points to the current time. The dark area denotes PM and the white area denotes AM.
To Activate The Timer
Slide the switch on the top of the timer to the right-hand side.
DO NOT RETURN THE PRODUCT
There are good days and there are bad days. If there is a problem with your product, or you are unhappy with it, we apologize for our mistake. PLEASE GIVE US A CHANCE and WE WILL MAKE IT RIGHT
Contact us
Toll-Free: 1 -833-3-FOSMON
(833-336-7666)
Direct: 612-435-7508
Email: support@fosmon.com
FAQs
How do I set the time?****
Turn the dial clockwise for one full revolution then advance until the arrow points to the current time. The dark area denotes PM and the white area denotes AM.
What is the maximum load rating?****
10 Amps @ 120 Volts AC
How do I program it?****
There are 48 push buttons around the dial. Each is for a period of 30 minutes. When a push button is pressed down, the appliance connected to the timer will be on during that period of time. When a push button is lifted up, the appliance plugged into the timer will be off during that period of time.
How many timers can I use with one outlet?****
You can connect up to 8 timers to one outlet, but they must be plugged into separate outlets.
What happens when I press both buttons at once?****
The timer will activate and you will hear a clicking sound from inside the unit. This means that both appliances are on at once and this cannot be done with this timer
How accurate are mechanical timers?****
The variation of several typical mechanical timers can reach three full minutes! Many additional timers, in addition, demand that the user set a timer for at least a 10-minute length before the timer can start. The battery life of your timer may also affect timing variance.
How does a mechanical timer know what time it is?****
Clockwork is used by mechanical to measure time. A manual timer is normally set by rotating a dial to the desired time interval; doing so releases energy from a mainspring that powers the machine.
How much power does a mechanical timer use?****
The average mechanical timer uses 1 Watt per hour. It translates to 24 Watt daily. Typically, a digital timer uses a little bit more energy. About 2 Watts per hour of power are used here.
Do mechanical timers need batteries?****
Mechanical timer, employing specialized mechanical customization, works on the same principles as mechanical timepieces, is cost-effective and useful, and can be arbitrarily modified from 1 minute to 60 minutes.
What is the function of mechanical timer?****
Devices are activated by mechanical timers when a predetermined amount of time has passed. They can be kept for a very long time and don’t need electricity.
Do all mechanical timers make a noise?****
Even in a calm setting, the Time Timer should run almost softly when it is put nearby and in use. The quartz movement that powers the coloured disc can only be faintly heard when the Timer Timer is held directly near to your ear.
Do outlet timers use electricity?****
The generally accessible types provide their own socket after plugging into a wall outlet. They have a timer that turns a switch on and off in accordance with predetermined times using a minimal amount of electricity from the power outlet itself.
Why do mechanical timers stop working?****
The timer can then halt operating as a result. Similar to this, damaged components might cause your mechanical timer to turn unevenly or not at all. Worn gears are one of the most frequent problems when that occurs.
How do you use a mechanical timer light switch?****
Wherever you intend to connect a light, insert the timer into a vacant wall socket. There may be a third setting on some mechanical timers that makes them perpetually on, allowing you to turn your lights on and off normally.
Video
Download PDF Link;Fosmon Indoor 24-Hour Mechanical Outlet Timer pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>