Television Wall Mount Amazon: Amazon Basics B09JWSDQDK Tilt TV Wall Mount Instruction Manual

June 9, 2024
amazon basics

The Amazon Basics B09JWSDQDK Tilt TV Wall Mount is a great way to save space and create a sleek look in your home. However, it’s important to follow the instructions carefully to ensure proper installation and avoid any potential risks. The instruction manual includes important safety instructions that should be read and retained for future use. It’s important to note that this wall mount is intended for use only with the maximum weights indicated and is suitable only for TVs with VESA hole patterns. The product is intended for TVs up to 150 lbs (68 kg) of weight and display size of 32″ – 86″ (81.3 – 218 cm). Before mounting, it’s crucial to determine the suitable mounting location and ensure the mounting surface is capable of supporting at least 4 times the weight of the product and the TV. The instruction manual also includes detailed installation steps for both drywall and concrete walls, as well as information on how to identify the correct screws and spacers for your TV model. Overall, the Amazon Basics B09JWSDQDK Tilt TV Wall Mount is a great product for those looking to save space and create a sleek look in their home, but it’s important to follow the instructions carefully to ensure proper installation and avoid any potential risks.

amazon basics B09JWSDQDK Tilt TV Wall Mount

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-PRODUCT

Scan the QR Code and scroll through the images to find an assembly or how-to video.

Tools Needed

Voltage detector

Stud finder

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-4

Delivery Content

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-5

Important Safety Instructions

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

CAUTION: Risk of injury and/or property damage!

  • Do not exceed the maximum weight indicated. This wall mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in the collapse of the wall mount and the attached TV, causing possible injury and/or property damage.
  • The product is suitable only for TVs with VESA hole patterns.

The product is intended for TVs up to 150 lbs (68 kg) of weight and display size of 32″ – 86″ (81.3 – 218 cm). If your TV weighs more, this wall mount is NOT compatible.

  • This product is for indoor private household use only and therefore should not be used in public places like restaurants or hotels.
  • Be cautious when opening/closing (folding/unfolding) the product. Keep hands away from the folding mechanisms to prevent fingers from being trapped and pinched.
  • Keep children and pets away while installing the product. This product contains small parts that could be a choking hazard if swallowed.
  • Do not use this product if any parts are missing, damaged, or worn.
  • Do not over-tighten the fasteners.
  • Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.
  • Always support the TV with your hands when making adjustments. Make sure to tighten fasteners and other connections well, but do not over-tighten them.
  • Never use an electric power tool to tighten fasteners.
  • Strings of the brackets must be out of reach of children and pets. Do not cut, but hide away the strings after installation.

Installation

For additional illustrated mounting/ assembly/ installation steps, refer to the end of the written instructions.

  • This product should be installed only by 2 adults. If in doubt, consult a professional.
  • Refer to the instruction manual provided with the TV you are going to install on this product. It includes additional information for mounting, ventilation and suitable mounting locations. Compare the technical data and requirements to make sure that this product is suitable for the TV.
  • Before mounting, determine the suitable mounting location. The product must be fixed to a wooden or masonry/concrete wall using fasteners that are appropriate for the mounting surface. Do not install on drywalls, wall boards or thin plywood. The mounting surface must be capable of supporting at least 4 times the weight of the product and the TV.
  • The maximum wall covering thickness, such as gypsum drywall, lath, plastic, etc. should not be greater than 0.63″ (16 mm) for wood stud walls or 0.4″ (10 mm) for masonry walls.
  • For wood stud walls: This product is designed to be mounted to 2″ x 4″ (51 mm x 102 mm) and Grade No. 2 wood studs that are spaced 16″ (406 mm) to 24″ (609 mm) on the center. Wood studs should be 2″ x 4″ (51 mm x 102 mm), at a minimum: 1.5″ x 3.5″ (38 mm x 89 mm).
  • For concrete walls: The bracket must be installed into a solid concrete wall. Make sure the concrete wall is suited for Standard Test Method for Compression Strength of Cylindrical Concrete Specimens, ASTM C39, or equivalent.
  • Do not drill into any pipes or power lines beneath the surface during mounting hole preparation. Use a voltage/metal detector before drilling any holes to eliminate any such potential risks.
  • Do not modify the structure of this product in any way.
  • If the product is to be attached to any structure other than that specified in this user manual, only a licensed professional contractor/installer should perform this installation. The mounting surface must support, at minimum, 4 times the combined weight of the mounting bracket and the TV. It is the responsibility and liability of the installer to ensure the suitability of the supporting structure.
  • Never install it onto furniture! This can lead to instability resulting in personal injuries and/or property damage.

NOTICE:  The product is made to fit various TVs with different dimensions. Not all fasteners delivered are needed for installation of the product.

Before Assembly

DANGER: Risk of suffocation!

  • Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.
  • Remove all the packing materials.
  • Remove and review all components before starting assembly.
  • Check the product for transport damages.

Disposal

  • Dispose of the product according to local regulations. If in doubt, consult your local authorities.

Specifications

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-8

Pre-Assemble Wall Brackets

Tools

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-10

  • Connect the wall bracket (WP) with the wall bracket with link plate (WP-2) by tightening the screws (P).
Wall Type

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-11

Drywall with wooden studs or wooden wall: Drywall should have a maximum 0.63″ (16 mm) thickness, wood stud size at least 1.5 x 3.5″ (39×89 mm). Start drywall installation from

Concrete/masonry wall: Concrete wall should have at least 8″ (203 mm) thickness, size of each concrete block is at least 7.99 x 7.99 x 15.98″ (203 x 203x 406 mm). Start concrete installation from. If the wall does not meet the above specifications, do not install the product, contact a professional for assistance.

Drywall Installation

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-12

Locate a wood stud with a stud finder: Use a stud finder to locate a wood stud. Mark the two sides of the stud to find the middle point of the stud. The studs must be capable of supporting 4 times the combined weight of the product and the TV.

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-13

Place drilling template: Select the desired installation height and tape the drilling template (T) on the wall aligning it with the stud marking. Check that the TV Center Line (2) on the template is at eye level to the location where you would be sitting. Place a spirit level on the Check Level line (1) of the drilling template (|T) to ensure that it is in a straight line.

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-14

Drill holes: Drill 3″ (76 mm) deep holes through the 4 locations (A, B, C and D) as marked on the template (T) using a 1/4″ (6.5 mm) drill bit. Remove the drilling template (1T) after drilling.

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-15

Attach TV mount assembly: One adult holds the TV mount assembly. Second adult half-way tightens the brackets into each of the holes using the fasteners (A) and washers (B). Using a spirit level, check that the TV mount assembly is aligned vertically then fully tighten the fasteners. After this step, proceed to.

Concrete Installation

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-16

Select installation position: Select suitable mounting position. Do not drill into any pipes or power lines beneath the surtace during mounting holes preparation. Use voltage/metal detector before drilling any holes to eliminate any such potential risks. The concrete wall must be capable of supporting 4 times the combined weight of the product and the TV.

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-17

Place drilling template: Select the desired installation height and tape the drilling template (IT) on the wall. Check that the TV Center Line (2) on the template is at eye level to the location where you would be sitting. Place a spirit level on the Check Level line (1) of the drilling template (IT) to ensure that it is in a straight line.

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-18

Drill holes: Drill 3.75″ (95 mm) deep holes through the 4 locations (A, B, C and D) as marked on the template (1T) using a 3/8″ (9.5 mm) drill bit. Remove the drilling template (1T) after drilling. Insert the wall plugs (C) into the drilled holes.

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-17

Attach TV mount assembly: One adult holds the TV mount assembly. The second adult half-way tightens the brackets into each of the holes using the fasteners (A) and washers (B). Using a spirit level, check that the TV mount assembly is aligned vertically then fully tighten the fasteners.

Identify mounting pattern

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-19

Fasteners guide

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-
FIG-20

  1. Screw diameteramazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-21
  2. Screw length

To accommodate various TV models, the product comes with screws with different diameters and lengths. It may take a few tries to find the correct screw diameter and length for the TV. The thread on the screw should fit the thread insert on the back of the TV without being too short (unable to hold the TV) or too long (damage the TV). To avoid damaging the TV, do not force the screws if they do not fit.

Spacers guide

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-22

To accommodate various TV models, the product comes with spacers with different diameters and thicknesses. Take into account that the inner diameter of the spacer should match the fastener used. The spacer type is determined by TV’s enclosure type and its mounting holes.

  1. Flat TVs with no obstructions: do not need spacers
  2. TVS with inset mounting holes, (3) TVs with cables sockets protruding outwards, (4) TVs with curved backs: need spacers to provide enough clearing for the mounting plate.

Flat or curved TV

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-23

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-25

Install screws (Brackets with flat TV): Test the depth and diameter of TV’s mounting holes using screws D, G and I (sizes M4, M6 and M8). Do not force any of the screws in. If there is resistance, stop immediately and try a screw with a smaller diameter. Find the suitable screws (D/G/) and pair it with the corresponding washers (L/M). Do a test fit of all 4 holes before fully fastening the brackets to the TV. Proceed to 17.

Install spacers (Brackets with curved TV)

amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-26 amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-
FIG-27

The goal of this step is to level the back of the curved TV into a flat surface. Test the depth and diameter of TV’S mounting holes using screws E, F, H, J and K (sizes M4, M6 and M8). Do not force any of the screws in. If there is resistance, stop immediately and try a screw with a smaller diameter. Then test the suitable screw with the corresponding washers (L/M) and spacers (0 or O/N) to find the suitable combination. Do a test fit of all 4 holes before fully fastening the brackets to the TV. Proceed to17.

Mount the TV to the wall plateamazon-basics-B09JWSDQDK-Tilt-TV-Wall-
Mount-FIG-28

With 1 adult on either side of the TV, lift up the TV to hook the brackets (MA) onto the wall plate. Pull the strings of the brackets downwards, slowly release the TV and then the strings.amazon-basics-B09JWSDQDK-Tilt-TV-Wall-
Mount-FIG-29

  • Loosen/tighten the 2 screws on the brackets (MA) to level the TV.amazon-basics-B09JWSDQDK-Tilt-TV-Wall-Mount-FIG-30
  • Loosen the knobs of the mounting brackets (MA), adjust the tilt of the TV then tighten the knobs.
  • Strings of the brackets must be out of reach of children and pets. Do not cut, but hide away the strings after installation.

Feedback and Help

We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.

Scan QR Code below with your phone camera or QR reader

UK: amazon.co.uk/review/review-your- purchases#

If you need help with your Amazon Basics product, please use the website or number below.

amazon.com/AmazonBasics

MADE IN CHINA

Specification

Product Name

|

Amazon Basics B09JWSDQDK Tilt TV Wall Mount

---|---

Maximum TV Weight

|

150 lbs (68 kg)

TV Display Size

|

32″ – 86″ (81.3 – 218 cm)

Wall Type

|

Drywall with wooden studs or wooden wall, Concrete/masonry wall

Drywall Thickness

|

Maximum 0.63″ (16 mm)

Wood Stud Size

|

At least 1.5 x 3.5″ (39×89 mm)

Concrete Wall Thickness

|

At least 8″ (203 mm)

Product Name

|

Amazon Basics B09JWSDQDK Tilt TV Wall Mount

Concrete Block Size

|

At least 7.99 x 7.99 x 15.98″ (203 x 203x 406 mm)

Fastener Guide

|

Screw diameter and length vary for different TV models

Spacers Guide

|

Used for flat or curved TVs

Feedback and Help

|

Refer to instruction manual or scan QR code for how-to video

Faqs

Can I install this wall mount onto furniture?

No, never install it onto furniture! This can lead to instability resulting in personal injuries and/or property damage.

What should I do if any parts are missing, damaged, or worn?

Do not use this product if any parts are missing, damaged, or worn.

Is it safe to modify the structure of this product in any way?

No, do not modify the structure of this product in any way.

Can this wall mount be used in public places like restaurants or hotels?

No, this product is for indoor private household use only and therefore should not be used in public places like restaurants or hotels.

How do I identify the correct screws and spacers for my TV model?

The instruction manual includes information on how to identify the correct screws and spacers for your TV model.

Can I use an electric power tool to tighten fasteners?

No, never use an electric power tool to tighten fasteners.

What kind of wall surfaces can this wall mount be installed on?

The product must be fixed to a wooden or masonry/concrete wall using fasteners that are appropriate for the mounting surface. Do not install on drywalls, wall boards or thin plywood. The mounting surface must be capable of supporting at least 4 times the weight of the product and the TV.

Can this wall mount be used with TVs that have different VESA hole patterns?

No, this wall mount is suitable only for TVs with VESA hole patterns.

What is the maximum weight and display size that this wall mount can hold?

The Amazon Basics B09JWSDQDK Tilt TV Wall Mount is intended for TVs up to 150 lbs (68 kg) of weight and display size of 32″ – 86″ (81.3 – 218 cm).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

amazon basics User Manuals

Related Manuals