Renkforce 2613603 Desk / Wall-mounted Corded Telephone User Manual

Renkforce 2613603 Desk / Wall-mounted Corded Telephone

Desk/Wall-mounted Corded Telephone
Item No. 2613603

Intended use

• The product is a corded telephone. You can either place the product on a desk or mount it on a wall.
• The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances.
• If you use the product for purposes other than those described, the product may be damaged. Improper use can result in other hazards.
• The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product.
• Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
• All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery contents

• Base station
• Handset
• Coiled handset cord
• Telephone line cord
• Magnet
• RJ11/TAE-N adapter
• Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The following symbols are on the product/appliance or are used in the text:

• The symbol warns of hazards that can lead to personal injury.
• The symbol warns of dangerous voltage that can lead to personal injury by electric shock.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General information

• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions that remain unanswered by these operating instructions, contact our technical support service or other technical personnel.
• Maintenance, modifications, and repairs must only be completed by a technician or an authorised repair center.

Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Operation

• Consult an expert when in doubt about the operation, safety or connection of the appliance.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to serious transport-related stresses.

Connected devices
Also, observe the safety and operating instructions of any other devices which are connected to the product.

Product Overview

1. Handset tab
2. LED indicator
3. SOS button
4. Keypad
5. REDIAL button
6. FLASH button
7. HOLD button

Installation

You can place your telephone on a flat and stable surface such as a desk or mount it on a wall.

Installing the telephone on a desk

Mounting the telephone on a wall

1. Install a dual-stud telephone wall mounting plate (not supplied) on a wall. Note: You may need a professional to install the mounting plate for you.
   • When penetrating the surface (e.g. drilling or inserting fasteners), make sure no cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock! Check for concealed wires and pipes before drilling or inserting fasteners.

Operation

LED indicator

Making a call
To make a call, lift the handset to take the line and enter the phone number using the keypad.

Answering a call
When there is an incoming call, pick up the handset to answer

Ending a call
Your telephone can automatically end the current call when the handset is near the base station.

There are two ways to end a call:

• Put the handset near the base station until the LED indicator turns off.
• Put the handset back on the base station.

SOS emergency call
Your telephone can store a single SOS number. You need to set the SOS number before you can make an SOS emergency call.

Setting/changing the SOS number

1. Place the magnet on the earpiece as shown. The LED indicator should switch OFF.
2. With the magnet held in place, enter a phone number and then hold the SOS button for more than 5 seconds.
3. Remove the magnet and the LED will switch back ON.
4. Put the handset back onto the base, the LED will switch OFF.
   • The SOS number has been stored, press it to check that it dials the correct number.

Making an SOS emergency call
Press the SOS button to call the preset SOS number.

Cleaning and care

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water.
• Clean the product with a dry, fiber-free cloth. Moisten the cloth if needed.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.

Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical Data

Product

• Telephone type…………………………Landline
• Flash function…………………………..Yes
• Flash time………………………………..600 ms
• Redial function………………………….Yes
• Hold function……………………………. Yes
• SOS function……………………………Yes
• Wall-mountable…………………………Yes
• Number of indicators…………………1
• User-replaceable cord……………….Yes

Environment

• Operating temperature………………-10 to +45 °C
• Operating humidity……………………10 – 90 % RH (non-condensing)
• Storage temperature………………….-20 to +70 °C
• Storage humidity……………………….5 – 95 % RH (non-condensing)

Others

• Casing material…………………………ABS
• Dimensions (W x H x D)…………….73 x 215 x 70 mm
• Weight…………………………………….338 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.

Copyright 2022 by Conrad Electronic SE.

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>