pogs The Turtle Wireless Over Ear Noise Cancelling Kids Headphones User Manual

pogs The Turtle Wireless Over-Ear Noise Cancelling Kids Headphones

PRODUCT INFORMATION

Welcome to POGS

Thank you for joining the POGS tribe. POGS have been designed specifically for kids to enjoy music and other content in a safe, creative and sustainable way with great sound experience. We recommend you read through this manual to get the most out of your POGS headphones. We hope you enjoy your POGS and in case anything isn’t as you expected, please contact us via email at [email protected].

What’s in the box?

POGS ‘The Turtle’ Wireless over-ear Noise Cancelling kids headphones

Quick Start Guide

POGS ANC Bluetooth•’The Turtle’

Optional accessories (available on www.pogsheadphones.com)

• Universal USB-C charging cable

• POGS-Safe Turtle cable (black plugs)
  Important: only use POGS-Safe Turtle cable to ensure max 85 dB when using with cable

• Travel pouch ‘The Kangaroo’

• Travel pouch ‘The Wallaby’

• Personalize your POGS with Doodas

The Turtle controls

Using POGS The Turtle Turning The Turtle on and off

Move the slider button to the left to turn off the headphones. The LED logo light will switch off. When turning The Turtle headphones on, you will hear the waking-up sound of a rooster. When turning them off, you will hear the night sound of an owl. You control the volume on your headphones with your connected device.

Setting up Bluetooth® wireless connection

To activate Bluetooth® pairing mode to pair a new device, press the Bluetooth® pairing button and hold for 5 seconds. The blue Bluetooth® pairing LED light will start to blink.

To connect to your Bluetooth® device, select ‘POGS The Turtle’ on your device. The blue Bluetooth® pairing LED light will be one continuously when connected.

Audio sounds will be heard when connected and disconnected.
For Android devices, Google Fast Pair prompt will appear on the device to allow for quick connection. To disconnect and switch off Bluetooth®, press Bluetooth® pairing button for 5 seconds. Or disconnect headphones using your Bluetooth® device.

Using Active Noise Cancelling

Active Noise Cancelling will reduce background and surrounding noises which gives a better listening experience, and importantly, allows you to reduce the volume of your audio which is safer for your ears.

• Active Noise Cancelling reduces outside noise and should not be used in risky areas where reduced outside noise can be dangerous, such as near traffic. Avoid using it when near traffic or other external hazards.
• Parents are still recommended to limit the use of headphones to a maximum of 2 hours a day at the maximum volume of 85 dB. When the volume is lower, at 60 dB or 70% of the POGS maximum volume, the time limit no longer applies.

To turn Active Noise Cancelling (ANC) on, press the Turtle button and the LED light in the button will switch on. When turning ANC on, you will hear a bubble sound like a real turtle submerging under water, drowning out the exterior sounds.

To turn Active Noise Cancelling (ANC) off, press the turtle button again and the LED light in the button will switch off. When turning ANC off, you will hear a different bubble sound, like a turtle resurfacing.

Music sharing with wireless POGLink

For kids to enjoy music or other content together, you can share audio between two Turtles without cables getting in the way. Wireless POGLink is activated and deactivated by pressing the Bluetooth® pairing button twice, first on the Turtle that is connected to your audio device and then on the second Turtle. The blue LED light will be on continuously once connected.

1. To activate POGLink, press Bluetooth® pairing button 2x on Turtle connected to audio device (blue LED will blink fast)
2. To connect second Turtle, press same button on second Turtle 2x (continous blue LED)
3. To disconnect, press same button 2x again

When POGLink is activated, an audio prompts will be heard in the headphones saying ‘POGLink on’. When the two Turtles are connected, the voice will say ‘POGS linked’. When disconnected by turning POGLink off, or when out of Bluetooth® range, the voice will say ‘POGS unlinked’.
Note that you can only connect two POGS The Turtle headphones together using wireless POGLink and the function requires the same chipset to be able to connect.

Charging your POGS The Turtle

To charge your POGS The Turtle, you will need a universal USB-C charging cable. This cable is not included in the box with your headphones, yet available as optional accessory at www.pogsheadphones.com or any other electronics store.

One our POGS principles is to reduce our impact on the environment and to minimize waste. Many households already have USB-C charging cables, so adding these can result in many unused cables. Instead, we have chosen to lower the sales price of the headphones and offer the cable as an accessory .

Logo light blinks every 10 seconds when battery is Low

1. Connect a USB charging cable
2. Plug the adapter in the socket (Logo light is on during charging)
3. Logo light turns off when fully charged

When battery is low, a battery low audio prompt will be given when battery reaches 20%, 10% and 5% of capacity. After charging, the headphones will be off and will need to be turned on again to use.
If you are out of battery, The Turtle can still be used with an audio cable. Equally, when using The Turtle where a wireless connection is not possible, like in an airplane, an audio cable can be used.

• When using a cable to connect to your output device when out of battery, please make sure you are using the POGS-Safe Turtle cable. This cable has unique built-in technology to limit the volume to a maximum of 85 dB, which other audio cables do not.
• For your safety, the headphones cannot be used during charging.
• To prolog battery lifespan, fully charge at least once every 3 months. Battery life varies by use and settings.

Using the Play/Pause button for music, phone calls and voice control

Renaming your POGS The Turtle

Fast Pair
If you have an Android phone or device, you can rename and personalize your POGS The Turtle headphones through your Android device (Google Fast Pair).

Audio signals

Below is a summary of the audio signals for the various functions of the POGS ‘The Turtle’ headphones.

Using your headphones with audio cable

• When using a cable to connect to your output device, for instance in a plane or when out of battery, please make sure you are using the POGS-Safe Turtle cable with black plugs. This cable l..:..J has unique built-in technology to limit the volume to a maximum of 85 dB, which other audio cables do not.
• Be aware that when using an audio cable, the audio level of headphones is determined by the power of the output device. Our PO GS-Safe Turtle cable ensures a maximum of 85 dB at an output power of lV, which is the maximum of most common consumer devices. If you are unsure, please contact the supplier of your device to verify.
• This POGS-Safe Turtle cable is not included in the box with your headphones, yet available as optional accessory at www.pogsheadphones.com. Select the POGS-Safe Turtle cable with the black plugs. To ensure we only sell cables that are wanted, we have chosen to lower the sales price of the headphones and offer the cable as an accessory.

The cable connection has priority over Bluetooth®. This means that if both connections are established, the music transmitted via cable will be played back.

Using the button on the optional POGS-Safe Turtle cable for music, phone calls, and voice control

When using the POGS-Safe Turtle cable, the button on the cable can be used to access the features on The Turtle.

Replacing your ear cushions

We know you’ll enjoy using your POGS and will want to continue using them. To prolong the usage of your POGS The Turtle, you can replace the ear cushions if they show signs of wear and tear due to extended or  frequent use. If the ear cushions have accidentally detached, please reattach them following the instructions provided below.

Removing ear cushions

To take off the ear cushions, firmly place your fingertips between the soft ear cushion and the hard ear can, applying some force, and then remove them.

Installing ear cushions

To install the ear cushions, align them perfectly with the ear can. Apply pressure ensuring that the clips are fastened, which you will hear. When all the clips are securely fastened, the gap between the ear can and the cushion will be evenly distributed. If some clips are not fully secured, apply additional pressure to those areas.

You can find replaceable ear cushions for The Turtle on our webshop under accessories, please check www.pogsheadphones.com.

Caring for your POGS headphones

We would love for you to use our products for a long time, and the products have been developed to withstand rough handling. Proper care can extend the lifetime of your POGS.

• We recommend that you clean the headphones regularly.
• Turn your POGS headphones off and remove all cable connections before you start cleaning.
• You can remove any dust or light dirt with a dry microfiber cloth.
• You can wipe off more stubborn dirt with a cloth which has been slightly dampened with water.
• Then, immediately wipe the damp surfaces off with a soft cloth without applying pressure.
• Liquid can destroy your POGS headphones’ electronics.
• Make sure that no Liquids of any kind penetrate the headphones.
• Do not, in any case, use solvents or abrasive cleaners.

Troubleshooting

• In case you have trouble with your POGS, please refer to our website www.pogsheadphones.com. Under the support section, you can find instruction videos as well as answers to Frequently Asked Questions.
• Please make sure you have followed the instructions in this manual to ensure you’re your headphones are charged and connected to your device with Bluetooth® wireless connection or using the PO GS-Safe Turtle cable.
• If you are still facing issues, you can perform a factory reset of the headphones, by pressing the Bluetooth® pairing button together With the Play/Pause button for 5 seconds.
• We are also happy to help you find a solution if you contact us via email: [email protected]

For your safety

Important safety instructions.

1. Read and keep these instructions.
2. Follow all instructions and warnings.
3. Clean only with a dry cloth.
4. Do not wear the headphones while charging, they will switch off when charging.
5. Use only attachments/accessories specified by POGS.
6. Refer all servicing or repairs to POGS through www.pogsheadphones.com.
7. Do not expose your headphones to rain, dripping, splashing or moisture of any kind. For instance, do not use your headphones outdoors during a thunderstorm, as this may result in electric shock or malfunction of your headphones.

Protect your hearing
Although POGS are volume-Limited headphones, the WHO recommends limiting the use of headphones. Extended listening may negatively impact hearing. And only use the volume-limited POGS-Safe Turtle cable when using The Turtle with a wired connection

Beware of your surroundings
Your headphones significantly dampen external noise. Do not in any case wear your headphones when you are required to pay attention to your surroundings.

Safety notes for lithium polymer batteries
Please do not open the products. Service should only be done by POGS B.V. or a service agent appointed by POGS B.V. Inside the product is a battery, which is normally inaccessible

CAUTION

• Don’t disassemble, crush, puncture, short external contacts, expose to temperatures above 60 C (140 F), sunshine, or expose to extremely low air pressure, or dispose of in fire or water .
• Make sure that children in particular do not have access to the installed storage battery. Properly dispose of a defective device at your local recycling facility.
• Do not allow battery acid to come into contact with skin, eyes, or mucus membranes. In the event of contact with acid, immediately flush the applicable areas with plenty of clean water and consult a physician if necessary. Lithium batteries may explode if handled improperly.
• Do not heat or short circuit batteries or dispose of them in fire

CAUTION

• Do not expose batteries to direct sunlight.
• If you suspect that the battery has been swallowed or otherwise incorporated, seek immediate medical attention. Leaking battery acid may lead to chemical burns, severe internal injury and, in extreme cases, even death.
• Only use the headphones to receive wireless signals in environments where the use of Bluetooth® technology is permitted.
• Ensure that the headphones do not become wet. Protect them from moisture, heat (e.g. during the summer in cars) and mechanical influences (e.g. severe shocks, pressure and dropping).
• Only charge the batteries at ambient temperatures of 10 – 40 C.

Caution FCC and IC statement for users (USA and Canada only)

This device complies with part 15 of the Federal Communication Commission (FCC) Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-003(B)/NMB-003(B)

SAR

End user must follow the specific operating instructions for satisfying RF exposure compliance. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Changes or modifications not expressly approved by POGS could void the user’s authority to operate the equipment.

Caring for our planet

• POGS cares for our kids and our planet. Please take care when disposing of your POGS headphones after they have reached the end of their Lifecycle.
• This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your Local municipality or disposal service. This ensures that old devices are recycled in a professional manner and also rules out negative consequences for the environment.
• Your POGS headphones are RoHS compliant (Directive 2011/65/EU and UK The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, and its amendments), on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
• Your POGS are REACH compliant (Regulation No. 1907/2006), which addresses the production and use of chemical substances and their potential impacts on human health and the environment. Article 33(1) of REACH Regulation requires suppliers to inform the recipients if an article contains more than 0.1 % (per weight per article) of any substance(s) on the Substances of Very High Concern (SVHC) Candidate List (‘REACH candidate List’). This product contains the substance “Lead” (CAS-No. 7439-92-1) in a concentration of more than 0.1% per weight. At the time of release of this product, except for the lead substance, no other substances of the ‘REACH candidate List’ are contained in a concentration of more than 0.1% per weight in this product.
• Your POGS have built-in battery that lasts for the Lifetime of the product; removal is not possible for the user. Recycling or recovery centres should handle the dismantling of the product and the removal of the battery. If, for any reason, it becomes necessary to replace such a battery, this procedure must be performed by POGS. In the European Union and other Locations, it is illegal to dispose of any battery with household trash. All batteries must be disposed of in an environmentally sound manner. Contact your local waste-management officials for information regarding the environmentally sound collection, recycling and disposal of used batteries.

Declaration of Conformity

• POGS B.V. hereby declares that this product has been tested and is compliant according to the test standard EN 60065:2014 + A11: 2017.
• FCC SDOC supplier’s declaration of conformity POGS B.V. hereby declares that this equipment follows the FCC Part 15 Subpart B.

Please note

• The information in this document may change without prior notice, and in no way constitutes any Liability on the part of POGS B.V.
• No part of this manual may be reproduced in any form or be broadcasted in any way electronically, mechanically, by photocopy or recording without the written permission of POGS B.V

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by POGS B.V. is under license.
Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>