Keepsmile Z-100FT Led Strip Lights User Manual
- June 13, 2024
- Keepsmile
Table of Contents
Keepsmile Z-100FT Led Strip Lights
Introduction
The Keepsmile Z-100FT LED Strip Lights are a versatile and vibrant lighting solution designed to add ambiance and style to any space. Whether you want to create a cozy atmosphere in your living room, add a pop of color to your bedroom, or enhance the look of your entertainment center, these LED strip lights offer a wide range of customization options. This product is perfect for both residential and commercial applications, allowing you to transform your space with ease.
Package Includes
Specifications
What’s in the Box:
- 100-foot LED strip roll
- Remote control with batteries
- Power adapter
- User manual
Installation Introduction
- Choose a flat, dry, and clean wall
- tear the plastic sheet bit by bit
- stick the LED strip on a suitable surface
- Connect power and controller
- Connect the controller and the light strip. Note that the arrow must be arrow-to-arrow when connecting.
- For the best-use effect, the connection at each end should not exceed 32.8ft, otherwise, the power supply and controller will be damaged.
Installation Tips
- Please use the power adapter that we equipped or the same specification adapter as ours.
- The input voltage must meet the voltage required by the light
- The output power of the adapter (KW value) must be equal to or greater than the power of the LED strip lights
- Check whether the controller and the light are connected correctly.
- Check whether the remote control is open, remove the insulation sheet, and whether the remote control battery is charged.
- Ensure that is being used within 5 meters and aligned to the infrared receiver of the controller
Warning
- The battery case and receiver do not immerse in water.
- The LED strip light kit does not immerse in the fire.
- Children under the age of 16 should use this product with adult supervision
DIY Remote Control
Smart APP
- Scan the QR code or search “Keepsmile” to download the smart app.
-
Open your phone Bluetooth to search for LED light devices, device name format: KSxx-xxxxxx
-
Forbid to click the LED lights device name directly, they will be connected automatically when you enter the APP.
-
Enter the smart APP, and click the car light to start your technology journey.
Smart APP 2
-
Please do not click on the device name, please go directly to the “Keepsmile” app.
-
When you enter the “Keepsmile” app and select “Car Light”, you will see the connection status of your device.
-
Auto connect successfully:
-
Click the icon and disconnect:
-
Individually control one of the two sets of equipment:
How to sync music to the Keepsmile app
- Please note for Android phones, the songs will sync from any music APP, but for iPhone users, it only can sync to music from iTunes because of Apple’s system and software limitations”
- Download music on your computer.
- Download and Install iTunes on your computer
- Log on to iTunes with your Apple ID and password
- Add “downloaded music” files to your iTunes
- Sync your iPhone with iTunes by your computer
- iTunes’s music playlist will be automatically synced to the smart app music menu.
Customer Service
- Warranty: 12-Month Limited Warranty
- Support: Lifetime Technical Support
- Email: Support003@keepsmile.vip
- Official Website: https://www.amazon.com/keepsmile
Schedule
- Click to select the name of the device you want to connect
-
Click and set the product on time
-
Click and set the product off time
Troubleshooting
- Check the Power Supply:
- Ensure the power supply is properly connected to the LED controller and plugged into a working outlet.
- Verify that the input voltage matches the LED strip’s requirements (typically 12V).
- Inspect the Connection:
- Check all connections along the LED strip, ensuring they are secure and not loose.
- Examine the connectors for any damage or loose wires.
- LED Strip Won’t Light Up:
- If the LED strip doesn’t light up at all, check if there’s a power switch on the controller or remote, and make sure it’s turned on.
- Ensure the LED strip is properly connected to the controller.
- LED Colors are Inconsistent:
- If the LED colors are inconsistent or certain segments are not displaying the correct color, inspect the RGB connections.
- Recheck the wiring, making sure red connects to red, green to green, and blue to blue.
- Remote Control Issues:
- If the remote control is not working, replace the batteries.
- Make sure there is a clear line of sight between the remote and the controller’s sensor.
- Check if there are any obstructions blocking the signal.
- Dimming or Brightness Issues:
- If the LED strip is not as bright as expected, ensure the power supply provides enough voltage.
- Adjust the brightness settings using the remote control or controller.
- Color Modes or Effects Not Working:
- If the color modes or effects are not working, double-check the remote control for proper mode selection.
- Make sure the controller is functioning correctly by testing different modes and effects.
- LED Strip Overheating:
- LED strips can get warm during extended use, but they should not overheat. If they become too hot, turn them off immediately.
- Ensure the LED strip is not covered or trapped in a way that restricts airflow.
- LED Strip Flickering or Flashing:
- Flickering or flashing may occur due to a poor power supply, loose connections, or a faulty controller.
- Check the power supply voltage, reseat the connectors, and inspect the controller for damage.
- Replace Faulty Components:
- If you’ve tried all the troubleshooting steps and the issue persists, it’s possible that a component (e.g., the controller, remote, or LED strip) is faulty. In this case, contact Keepsmile customer support or consider replacing the defective part.
FAQs
What is the Keepsmile Z-100FT LED Strip Lights?
Keepsmile Z-100FT LED Strip Lights are a set of versatile and colorful LED strips designed for various lighting applications.
How long are the LED strips?
The Keepsmile Z-100FT LED Strip Lights measure 100 feet in length, providing ample coverage for your lighting needs.
What are the color options available?
These LED strips typically offer a wide range of colors, including RGB (Red, Green, Blue), allowing you to create custom lighting effects.
Are the LED strips easy to install?
Yes, these LED strips are designed for easy installation, often featuring adhesive backing for simple attachment to various surfaces.
Can I cut the LED strips to a shorter length?
Yes, many Keepsmile Z-100FT LED Strip Lights can be cut to your desired length at designated cut points.
What is the power source for these LED strips?
These LED strips are typically powered via a standard electrical outlet, and they come with an adapter.
Do they come with a remote control for adjusting settings?
Yes, these LED strips often include a remote control, allowing you to change colors, brightness, and lighting modes easily.
Are they suitable for outdoor use?
Some Keepsmile Z-100FT LED Strip Lights are designed for indoor use only, so it's essential to check the product specifications for outdoor compatibility.
What are the different lighting modes available?
These LED strips typically offer various lighting modes, such as static colors, dynamic color-changing effects, and dimming options.
Can the LED strips be synced with music or sound?
Yes, some models are equipped with music-sync features, allowing the lights to pulse and change colors to the rhythm of the music.
Is there a warranty for the Keepsmile Z-100FT LED Strip Lights?
Many of these LED strips come with a manufacturer's warranty to ensure product quality and performance.
Are these LED strips energy-efficient?
Yes, LED technology is known for its energy efficiency, and these strips are no exception, helping you save on electricity costs.
Downlaod This PDF Link:Keepsmile Z-100FT Led Strip Lights User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>