StarTech Com POEINJ1G 1-Port Gigabit Midspan PoE+ Injector User Guide

June 9, 2024
StarTech com

StarTech Com POEINJ1G 1-Port Gigabit Midspan PoE+ Injector

StarTech-Com-POEINJ1G-1-Port-Gigabit-Midspan-PoE+-Injector-
fig-1

Product Diagram (POEINJ1G / POEINJ1GW)

StarTech-Com-POEINJ1G-1-Port-Gigabit-Midspan-PoE+-Injector-
fig-2
StarTech-Com-POEINJ1G-1-Port-Gigabit-Midspan-PoE+-Injector-
fig-3

  Port/LED/Connector Function

1

|

Power LED

| •          Indicates if power is being supplied

•          Solid Green = On

•          Off = Off

2| GbE + PoE Port (Data + Power)| •          Connect a Network Cable to a PoE or PoE+ device

•          Supports 1 Gbps, 100 Mbps, and 10 Mbps

3| GbE Port (Data)| •          Connect a Network Cable to the PoE Injector
4| DC Power Port| •          Connect the PoE Injector to a Power Source using the included Power Adapter
5| Mounting Holes| •          Allows for a permanent installation to a flat and stable surface

Package Contents

  • PoE+ Injector x1
  • Mounting Screws x 4
  • Power Adapter (NA for POEINJ1G, EU/UK/ANZ for POEINJ1GW) x 1
  • Quick-Start Guide x 1

Requirements

For the latest requirements, please visit:

Installation

Note: Refer to Figure 1 for a typical midspan installation.

  1. Connect an Ethernet Cable from the Source Network Device (i.e, computer, router, non-PoE switch) to the GbE port of the PoE Injector.
  2. Connect an Ethernet cable to the GbE + PoE port on the PoE Injector.
  3. Connect the other end of the Ethernet Cable used in Step 2 to either a Powered Device (PD) that is PoE+ or PoE compliant, or to a PoE Splitter to separate Data and Power.
  4. Plug the included Power Adapterto a power source and connect it to the PoE Injector. Ensure the Power LED is illuminated.

CONNECTION INSTRUCTION

StarTech-Com-POEINJ1G-1-Port-Gigabit-Midspan-PoE+-Injector-
fig-4

Regulatory Compliance

FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

  • This Class B digital apparatus complies with Canadian ICES-003.
  • CAN ICES-3 (B)/NMB-3(B)
  • This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
    1. This device may not cause interference
    2. This device must accept any interference, including interference that may cause undesired operation of the device

Warranty Information

  • This product is backed by a two years warranty.
  • For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product

ABOUT COMPANY

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

StarTech com User Manuals

Related Manuals