EKO K32DVD 32 Inch HD Android TV Instruction Manual
- June 9, 2024
- EKO
Table of Contents
32” HD TV
WITH BUILT-IN DVD PLAYER K32DVD
INSTRUCTION MANUAL
Please read this manual carefully before using, and keep it for future
reference.
K32DVD 32 Inch HD Android TV
GENERAL SAFETY
Read this manual thoroughly before you start using the TV.
Store this manual, the completed warranty card, your receipt and the product
packaging.
The safety precautions instructions reduces the risk of fire, electric shock
and injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
The cover (or back) of the unit should not be removed to prevent risk of electric shock. This unit must be serviced by a qualified service personnel only.
The lightning flash with symbol within the triangle is intended to warn you of
a non-insulated dangerous voltage in the product’s enclosure that could be of
sufficient magnitude to generate a risk of electric shock to persons.
The exclamation point within the triangle is intended to warn you to the
presence of important operating and maintenance instructions in the documents
included with the product.
IMPORTANT INFORMATION
The lightning flash symbol within the triangle is intended to warn you of non- insulated dangerous voltage the product’s enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.
- Using Cabinets or stands recommended by the manufacturer of the television.
- Only using furniture that can safely support the Products.
- Ensure the Product is not overhanging the edge of the supporting furniture.
- Do not place the product on a high furniture without securing both the furniture and the product to a stable support.
- Do not place the product on cloth or other conductive materials.
- Warn children of the dangers of climbing on furniture to reach the television or its controls and to call for an adult to assist.
GENERAL SAFETY INSTRUCTIONS
IMPORTANT INFORMATION
- Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard
- Do not temper or change or modify the product in any way.
- Only use Accessories outlined and recommended by the manufacturer.
- Please do not expose the product to splashing or water contact
- Please do not place any object on top of the product including objects filled with liquids such as vases.
- Danger of explosion if battery is incorrectly placed. Replace with same or equivalent type.
Installation
Please follow instruction when installing this product in accordance with the
instruction manual. This product must be positioned in a sufficiently stable
location, it can be potentially hazardous due to falling and can cause
injury, particularly to children if it positioned incorrectly.
-
Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the product rating label
-
Do not use a damaged power cord, plug or loose outlet. Doing so may cause an electric shock.
-
Do not plug several devices into the same outlet. Doing so may cause the outlet to overheat and start a fire. Make sure the outlet is readily accessible during operation of the equipment.
-
Do not bend, twist or kink the power cord excessively.
-
Do not allow anything to rest on or roll over the power cord and antenna cable.
Doing so may cause a fire or an electric shock. -
Do not run the power cord near heat-producing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires, resulting in fire or electric shock.
-
Unplug this TV during lightning storms or when unused for long periods of time.
Not doing so may result in fire or electric shock. -
Do not cover the ventilation openings of the product with items such as newspapers, tablecloths, curtains etc or insert objects into the slots available on the products.
As this could result in the product temperature rising and could cause a fire. -
If you notice any unusual odors or smoke around the unit, immediately disconnect the unit from the outlet and contact the service center. Failure to do so may result in fire or electric shock.
-
When not using the unit for long periods of time or when you are moving the unit please ensure to disconnect the power cord from the wall socket.
-
Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire.
-
The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age,
They must be supervised product by a person responsible for their safety. -
Batteries from the remote control must be only removed by an adult, the adult must ensure to keep them out of reach of infants and children. Seek medical attention immediately if a child has swallowed a battery.
-
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
-
To maintain the product do not use any chemical or cleaning agent or wet cloth, please only ensure to utilize a dry cloth to wipe it down from marks or dust and only after unplugging the product from the power socket.
-
Please ensure to contact our call center for any repair or service required for the products.
WARNING!
It is STRONGLY RECOMMENDED that you ANCHOR this product.
Toppling furniture and TV’s can cause serious injury or death.
TO HELP AVOID ANY SERIOUS OR FATAL INJURY, WE STRONGLY RECOMMEND THAT THIS
PRODUCT BE PERMANENTLY FIXED TO THE WALL OR OTHER SUITABLE SURFACE. FIXING
DEVICES ARE NOT INCLUDED SINCE DIFFERENT SURFACE MATERIALS REQUIRE DIFFERENT
ATTACHMENTS. PLEASE SEEK PROFESSIONAL ADVICE IF YOU ARE IN DOUBT WHAT FIXING
DEVICE TO USE.
If a television is not positioned in a sufficiently stable location, it can be
potentially hazardous due to falling. Many injuries, particularly to children,
can be avoided by taking
simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television.
- Only using furniture that can safely support the television.
- Ensuring the television is not overhanging the edge of the supporting furniture.
- Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
- Not standing the television on cloth or other materials placed between the television and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television or its controls.
Please make sure upon positioning this product, the place is:
- Not wet or damp and Well ventilated
- Away from direct sunlight or heaters.
- Away from splashes or food.
- Protected from excessive dust or grease.
- Do not install this equipment in a confined space such as a bookcase or similar unit.
- Do not install the TV set near heat sources such as radiators, stoves or other audio visual equipment that produce heat.
- Do not place containers with liquids, if liquid falls inside the products it may result in short-circuit, fire or electric shock.
- Do not place small metallic objects on top of the unit. Metal object falls inside the product it may result in short-circuit, fire or electric shock.
- Do not use or store flammable or combustible materials near the unit. Doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes or incense sticks on top of the TV set.
- The antenna must be installed away from high-voltage power line,
- Please contact an antenna professional installer to install the antenna to avoid incorrect installation which could result in fire, electric shock or serious injury.
- Install the unit at a reasonable distance from the wall to ensure sufficient ventilation.
- If mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
INSTALLATION
Install the stand as described below, or if you want to mount it to a wall,
please contact a professional installer.
Please ensure the TV is not plugged into the wall socket and furthermore we
recommend to get another person to assist in the following task.
Attaching the stand
Step 1
Place a soft cushioned material on top of a flat surface to prevent damaging
the screen panel. Then place the TV screen flat on top, with the screen side
facing down, as illustrated on the right.
Step 2
Align the stand leg to the installation point, as illustrated below
Step 3
Tighten the screws (supplied) with a screwdriver to affix the stand to the
panel, as illustrated on the right.
CAUTION!
Do not apply excessive force as this may damage the screw holes.
INSTALLATION (Cont.)
Wall-Mounting Instructions
Please ensure the TV is not plugged into the wall socket and furthermore we
recommend to get another person to assist in the following task.
- We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own.
BACK OF TV
VESA WALL PATTERN – 200 (w) x 100 (h)
NOTE: If you are wall-mounting the TV, this should be done by a qualified installer.
CONTROLS AND CONNECTIONS
1. OPTICAL
2. RF(ANTENNA)
3. HDMI 1 (ARC)
4. HDMI2| 5. USB
6. MINI AV
7. MINI YPBPR
8. EARPHONE
---|---
USB connection
Insert a USB storage device into the USB port to record, playback of
video/music/photo
REMOTE CONTROL
- STANDBY: Set the unit in standby mode; press it again to switch it on.
- GOTO: Jump to a different chapter of DVD.
- ANGLE: View DVD playback from different angles, if the DVD has this feature.
- REPEAT: Repeat different chapter/title or entire DVD.
- FAV: Press to display your favorite program in DTV mode.
- TEXT: Switch between TV and Teletext mode.
- SUBTITLE: Enable/disable subtitles.
- SIZE / ZOOM: Change the picture size.
- MEDIA: Select USB mode.
- : PLAY/PAUSE in TIMESHIFT and USB mode.
- RECORDER/D-SETUP: Record / Display the main disc menu.
- ■ : Stop playing.
- MENU: Display the main TV menu.
- : Press the LEFT/RIGHT/UP/ DOWN button to navigate the on-screen menus and adjust the system settings to your preference. Press OK to confirm your selection.
- SOURCE: Switch the input source.
- VOL + /-: Turn the volume up/down.
- NUMBER BUTTONS (0-9) : Press to select a TV channel directly when watching TV. The channel changes after 2 seconds.
- -/–: Switch the digits.
- AUDIO / LANG: Switch the available soundtrack language (DTV/DVD).
- P-MODE: Cycle through the different picture mode.
- S-MODE: Cycle though the different sound modes.
- : Return to the previous channel.
- DISPLAY: Display information of the current program
- CH +/-: Press to play the next or previous channel; press repeatedly to scan through the channels.
- MUTE: Mute the sound. Press again or press VOL+ to restore the sound.
- GUIDE / D. MENU : Display electronic program guide; Display the main disc menu.
- OK: Confirm selection.
- EXIT / TITLE: Exit from the main TV menu displayed on the screen; Display the DVD title menu. (DVD)
- : Play the previous file.
- / INDEX: Play next file; Display the record program list (DTV).
- : Move fast backward.
- : Move fast forward.
- ASPECT: Press repeatedly to select the desired screen aspect ratio.
- SUBPAGE: Manually jump to previous or next subpages of Teletext.
- FREEZE: Hold the picture.
- SLEEP: Set the TV sleep timer.
- A-B: Repeat DVD scenes of your preference.
- TV/RADIO : Switch the unit between TV and radio; EJECT: Open or close the disc compartment. (DVD)
NOTE: The functions of those buttons, which marked with “DVD”, are available only when your TV has fitted a DVD player.
Using the Remote Control
- Battery should normally last for about one year.
- Do not mix old and new batteries in the remote
- Do not use different types of battery
- If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
- Keep batteries away from children and pets.
- Never throw batteries into a fire.
- Do not drop, or impact the remote control as it void warranty immediately.
- The remote control operate at a range of 5 to 6M effectively
- Do not expose the remote control sensor to a bright light.
BASIC OPERATIONS
SELECTING AN INPUT SOURCE
- Press the SOURCE button on the remote control, to display the input source list.
- Press the buttons to select the input source, and then press OK to confirm.
- You can access connected USB drives by selecting MEDIA.
NOTE: The first time you use this TV, make sure to go through the first time installation and auto-search for all the DTV channels.
RECORDING
NOTE: Before you can record with this TV, make sure you have the USB you wish to use formatted as a FAT32 USB storage device. Then insert the device into your TV.
- Insert your USB device into the USB Port
- When watching Digital TV, Press the RECORD button on the remote control to start recording. Press record again to remove information bar.
- Press RECORD again or the STOP button to display information about recording.
- Select “POWER OFF” to stop recording and turn off the TV.
- Press the EXIT button to cancel the dialog box and continue recording.
To Watch a Recorded Program:
Press the INDEX button on the remote control to see list of recorded programs
Use the buttons to find and select a recorded file.
Time-Shift Function
The time-shift function allows you to pause the Live TV signal, then resuming
at your own convenience. (Make sure you have a formatted FAT32 USB storage
device in your TV for time-shift function to work).
MEDIA
MEDIA PLAYBACK
- First insert a USB Device into the TV
- Press “MEDIA” on the remote control.
- Use the directional arrow keys to go through folders within your USB device to access Photo’s, Music, Movies or text.
- Press the EXIT button to return to previous page
CHANNEL SETTINGS
To access CHANNEL settings, press the MENU button and go to
CHANNEL.
TUNING SETUP
To auto scan your TV to find your local channels, make sure the Antenna (RF)
cable is connected to the TV. Then proceed to tune your TV by following the
below.
Make sure to select your country “Australia”, then go to tune type and
change the “TUNE TYPE” to only “DTV”.
Press OK to commence Auto Scanning.
MENUS (cont.)
PICTURE SETTINGS
To access Picture settings, press the MENU button and go to picture.
Picture Mode: You can select the type of picture which best corresponds
to your viewing requirements. Contrast, Brightness, Colour, Tint and Sharpness
can be adjusted when the picture mode is set to personal.
Contrast: Adjust the white level of the picture.
Brightness: Adjust darkness of black sections in the picture. Colour:
Adjust the color intensity of the picture.
Tint: Adjust the hue of the picture. (Only in the NTSC mode)
Sharpness: Object edges are enhanced for picture detail. Color
Temperature: Select the color temperature that you feel comfortable.
Noise Reduction: Reduces the picture noise in a weak broadcast signal.
MENUS (Cont.)
SOUND SETTINGS
To access Sound settings, press the MENU button and go to Sound.
Sound Mode : You can select a sound mode to suit your personal
preferences. Treble and Bass can be adjusted when the sound mode is set to
personal.
Treble: Adjust the high frequency sounds. Bass: Adjust the low frequency
sounds.
Balance: Adjust the level of sound coming from the left and right
speakers.
Auto Volume Level: Auto Volume automatically remains on the same level of
volume if you change programmes. Because each broadcasting station has its own
signal conditions, volume adjustment may be needed every time when the channel
is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each program.
SPDIF Mode: You can select the SPDIF Mode PCM/Auto or Off.
AD Switch: You can select the AD Switch On or Off. To increase the volume
of the Audio description (AD). Amblyopia function for the blind, the tracks
will be mixed describe the current screen It need code stream to support.
MENUS (Cont.)
LOCK MENU
To access LOCK settings, press the MENU button and go to Lock.
Default password is “0000”, then you can set your own password to lock the
TV.
System Lock : The feature can prevent unauthorized operating the TV set,
unless entering 4-digit password. The default password is 0000.
NOTE: If you forget your password, the super password of 4711 still is
valid.
Set Password: Press the ENTER button to access the submenu. You can set
your private password. Press the number buttons on the remote control to set
the new password. When the new password has been input twice, the setting is
finished successfully.
Channel Lock (In ATV/DTV mode) : Press the green button to lock the
available channel you want. Press the green button again to unlock it. To
watch a locked channel, enter your 4 digit password number when input screen
displays.
Parental Guidance: Press the buttons to select Parental Guidance. This
feature can prevent children watching adult’s TV programmed, according to the
rating limit set.
Key Lock: Set to prevent it from being used by young children, or other
unexpected using, When Key Lock’s statue is on, you can’t use the Key panel
button
Hotel Mode: Press the buttons to select Hotel Mode, then press ENTER
button to enter Hotel mode.
MENUS (Cont.)
TIME SETTINGS
To access TIME settings, press the MENU button and go to TIME.
Time Zone : Press buttons to select time zone.
Sleep Timer: Select the time to turn the TV to standby mode
automatically.
Auto Standby: Select the time in hours (off, 3H, 4H, 5H) that you want
the TV to remain on after your last operation.
Tips: The remote control does not make any operation in the hypothesis
time, it will close down automatically. If you do any operation, it will reset
the time.
OSD Timer: Select the time in seconds (5s, 15s, 30s) that you want the
On-Screen Menu remains display after your last operation.
NOTE:
♦The Clock will change with the area which you have selected in the Time zone.
MENUS (Cont.)
SETUP SETTINGS
To access Setup settings, press the MENU button and go to SETUP.
Language: Select your preferred On Screen Display language.
TT Language: Press the• TV buttons to select the Teletext language.
Audio Languages: Press the buttons to select the Audio languages.
Subtitle Language: Press the buttons to select the Subtitle language.
Hearing Impaired: Press buttons to select Hearing Impaired, press the
buttons to select On/Off.
PVR File System: PVR file system. Aspect Ratio: You can select the
picture size which best corresponds to your viewing requirements.
Blue Screen: Set the background color to blue or black when having no
input signal.
First Time Installation : This is a guide to help you to setup the TV.
Reset: Recall the default setting.
Software Update (USB): Update the software using the USB memory device
Please be careful not to disconnect the power or remove the USB drive until
updates are complete.
HDMI CEC: Press buttons to select HDMI CEC, press ENTER to enter sub-
menu.
CEC Control Press buttons to turn the CEC Control On or Off.
Device Auto Power Off Press buttons to turn the Auto Power On or Off.
TV Auto Power On Press buttons to turn the TV Auto Power On or Off.
Device List Display devices that are connected to TV.
Device Menu Press ENTER button to open the main menu of device.
FAQs
GENERAL PROBLEMS WITH TV SET
If any issues persist, please contact us at help@eko-
entertainment.com.au
Symptoms | Possible Reason | Solutions |
---|---|---|
No picture, no sound, and no indicator light on | 1.The power cord is not | |
plugged in 2.The power is off | 1.Plug the power cord in 2.Turn the power on | |
Picture and sound with abnormity | 1.Contrast, sharpness, and color are set |
improperly
2.Color system is set improperly 3.Sound system is set improperly| 1.Adjust
the value of Contrast, sharpness, and color
2.Set the Color system to the country broadcasting standard
3.Set the Sound system to the country broadcasting standard
Picture is spotted or with snow| Signal source is low-grade or the signal cord
is in a lower quality| Use the qualified signal cord
No picture, no sound light and indicator is green/blue| Volume is in the
minimum value or TV is in mute mode.| Adjust the value of volume
The signal cable is not correctly connected.| Connect the signal cable
correctly
Blue screen, AV is displayed| There is no signal input or the video cable is
not connected or incorrectly connected| Connect the video cable correctly
No sound| There is no audio signal input or audio cable is not connected
correctly| Connect the audio cable correctly
The remote control does not work| Batteries are improperly installed or
exhausted| 1. Make sure the positive and the negative
polarities are correct.
2.Check if there is a loose contact between the batteries and the springs
3. Replace the batteries
SPECIFICATIONS
Resolution | 1366 x 768 |
---|---|
Display Colours | 16.7M |
Contrast ratio: | 1200 : 1 |
Aspect Ratio | 16:09 |
Multimedia Playback Format under
USB Mode| Movie: mpg/avi/ts/mov/mkv/dat/mp4/vob/rmvb
Music: mp3/wma
Photo: jpg/jpeg/bmp/png
Supported Discs| DVD, CD
Power Source| AC 100-240V – 50/60H z
Power Consumption| 60W Max.
USB| 5V = max. 500mA
Dimensions| With stand: 732 (w) x 191.4 (d) x 479.9 (h) mm
Without stand: 732 (w) x 69.4 (d) x 434 (h) mm
Weight| Net: 4.06 kg
Gross: 5.29 kg
REGION CODE SETTING
All DVD discs are coded by the sales territory. Please note the built-in DVD
player is set to Region 0 coding by the factory, which cannot be changed. This
is in compliance with DVD patent requirements.
The region number for the built-in DVD player is 0
CUSTOMER SUPPORT
This TV comes with warranty.
For all product related enquiries or technical questions
please use the following to get in touch:
****02 8279 8606 IX)
help@eko-entertainment.com.au
www.eko-entertainment.com.au
or by scanning the OR Code.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>