BenQ EC-CW-UG-V3 e-SPORTS Mouse User Guide
- June 9, 2024
- BenQ
Table of Contents
BenQ EC-CW-UG-V3 e-SPORTS Mouse User Guide
Package contents
- **Mouse
**
- **Enhanced Wireless Receiver
**
- **USB Wireless Receiver
**
- **USB Adapter
**
- **Spare Skatez
**
- **USB Cable
**
- **User Guide
**
- **Regulatory Statements
**
- **Warranty Card
**
Top view
Bottom view
**Report rate switch button ( 7 )
**
**DPI switch button ( 6 )
**
Wireless operation (via Enhanced Wireless Receiver)
Wireless operation (via USB Wireless Receiver)
Wired operation
Charging
-
A Charging by Enhanced Wireless Receiver
-
B Charging by USB-C
Power LED indicators
While charging
Battery = 100%
Battery = 51 – 99%
Battery = 26 – 50%
Battery = 0 – 25%
Mouse in use
Battery = 0 – 10%
Powering off (for power saving)
Product support
zowie.benq.com > Support > DOWNLOAD & FAQ
Official Website
E-Waste Declaration for India
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of wasteel ectrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about E-waste and the places to drop off your waste equipment for recycling in India please visit https://www.benq.com/enus/support/recycling/global-recycle.html.
Specifications
- No driver needed.
- Connection:
- Wireless: 2.4G RF
- Wired: USB (Auto switch to wired mode when USB cable is connected)
- DPI (Dots per inch) settings:400/800/1600/3200 dpi
- Adjustable USB report rate:125/500/1000 Hz
- Connector: USB type-A on a PC; USB type-C on a device
- Buttons: 7 buttons
- Switch:1 (switch for power off and two receivers)
- Cable: USB type-A to USB type-C (2 meters/6.6 feet)
- Battery charging: approximately 2 hours
Changing DPI setting
Press the DPI switch (labeled 6 ) to switch to a desired DPI setting.
Adjusting USB report rate
Press the report rate switch (labeled 7 ) to switch to a desired report rate setting.
Changing the Lift Off Distance (LOD) of your mouse You might want to change
the LOD to work with your mouse pad properly.
Wireless mode: Power off the mouse first. Press and hold the
following combination keys together and power on the mouse at the same time.
Wired mode: Power off and disconnect the mouse first. Press and hold the
following combination keys together and re-connect the mouse at the same time
- For a lower LOD: buttons 4 + 1
- For a medium LOD: buttons 5 + 1
- For a higher LOD: buttons 4 + 1 + 2
Changing click response time
You can change click response time as desired.
Wireless mode: Power off the mouse first. Press and hold the following
key and
power on the mouse at the same time.
Wired mode: Power off and disconnect the mouse first. Press and hold the
following key and re-connect the mouse at the same time.
- Fast response time : 4
- Normal response time: 5
LED indicator on Enhanced Wireless Receiver
- Solid white: In sleep mode
- Dark white: In normal operation
- Flashing amber: Weak signal. Move the mouse within the effective range to improve signal strength.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>