EKO K400DVD 40 Inch Full HD TV with Built in DVD Player Instruction Manual

EKO K400DVD 40 Inch Full HD TV with Built in DVD Player

GENERAL SAFETY

Read this manual thoroughly before you start using the TV.
Store this manual, the completed warranty card, your receipt and the product packaging.
The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to.
Please follow all instructions and take notice of all warnings.

The cover (or back) of the unit should not be removed to prevent risk of electric shock.
This unit must be serviced by a qualified service personnel only.

 The lightning flash with symbol within the triangle is intended to warn you of a non-insulated dangerous voltage in the product’s enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.
The exclamation point within the triangle is intended to warn you to the presence of important operating and maintenance instructions in the documents included with the product.

IMPORTANT INFORMATION

The lightning flash symbol within the triangle is intended to warn you of non- insulated dangerous voltage the product’s enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.

• Using Cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the Products.
• Ensure the Product is not overhanging the edge of the supporting furniture.
• Do not place the product on a high furniture without securing both the furniture and the product to a stable support.
• Do not place the product on cloth or other conductive materials.
• Warn children of the dangers of climbing on furniture to reach the television or its controls and to call for an adult to assist.
• Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard
• Do not temper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not expose the product to splashing or water contact
• Please do not place any object on top of the product including objects filled with liquids such as vases.
• Danger of explosion if battery is incorrectly placed. Replace with same or equivalent type.

Installation
Please follow instruction when installing this product in accordance with the instruction manual. This product must be positioned in a sufficiently stable location, it can be potentially hazardous due to falling and can cause injury, particularly to children if it positioned incorrectly.

• Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the product rating label

• Do not use a damaged power cord, plug or loose outlet. Doing so may cause an electric shock.

• Do not plug several devices into the same outlet. Doing so may cause the outlet to overheat and start a fire. Make sure the outlet is readily accessible during operation of the equipment.

• Do not bend, twist or kink the power cord excessively.

• Do not allow anything to rest on or roll over the power cord and antenna cable.
  Doing so may cause a fire or an electric shock.

• Do not run the power cord near heat-producing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires, resulting in fire or electric shock.

• Unplug this TV during lightning storms or when unused for long periods of time.
  Not doing so may result in fire or electric shock.

• Do not cover the ventilation openings of the product with items such as newspapers, tablecloths, curtains etc or insert objects into the slots available on the products.
  As this could result in the product temperature rising and could cause a fire.

• If you notice any unusual odors or smoke around the unit, immediately disconnect the unit from the outlet and contact the service center. Failure to do so may result in fire or electric shock.

• When not using the unit for long periods of time or when you are moving the unit please ensure to disconnect the power cord from the wall socket.

• Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire.

• The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age,
  They must be supervised product by a person responsible for their safety.

• Batteries from the remote control must be only removed by an adult, the adult must ensure to keep them out of reach of infants and children. Seek medical attention immediately if a child has swallowed a battery.

• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

• To maintain the product do not use any chemical or cleaning agent or wet cloth, please only ensure to utilize a dry cloth to wipe it down from marks or dust and only after unplugging the product from the power socket.

• Please ensure to contact our call center for any repair or service required for the products.

WARNING!

It is STRONGLY RECOMMENDED that you ANCHOR this product.
Toppling furniture and TV’s can cause serious injury or death.

TO HELP AVOID ANY SERIOUS OR FATAL INJURY, WE STRONGLY RECOMMEND THAT THIS PRODUCT BE PERMANENTLY FIXED TO THE WALL OR OTHER SUITABLE SURFACE. FIXING DEVICES ARE NOT INCLUDED SINCE DIFFERENT SURFACE MATERIALS REQUIRE DIFFERENT ATTACHMENTS. PLEASE SEEK PROFESSIONAL ADVICE IF YOU ARE IN DOUBT WHAT FIXING DEVICE TO USE.

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the burniture and the television to a suitable support.
• Not standing the television on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.

Please make sure upon positioning this product, the place is:

• Not wet or damp and Well ventilated
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not install this equipment in a confined space such as a bookcase or similar unit.
• Do not install the TV set near heat sources such as radiators, stoves or other audio visual equipment that produce heat.
• Do not place containers with liquids, if liquid falls inside the products it may result in short-circuit, fire or electric shock.
• Do not place small metallic objects on top of the unit. Metal object falls inside the product it may result in short-circuit, fire or electric shock.
• Do not use or store flammable or combustible materials near the unit. Doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes or incense sticks on top of the TV set.
• The antenna must be installed away from high-voltage power line,
• Please contact an antenna professional installer to install the antenna to avoid incorrect installation which could result in fire, electric shock or serious injury.
• Install the unit at a reasonable distance from the wall to ensure sufficient ventilation.
• If mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

INSTALLATION

Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer.
Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task.

Attaching the stand

• Step 1 Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV screen flat on top, with the screen side facing down, as illustrated on the right.
• Step 2 Align the stand leg to the installation point, as illustrated below
• Step 3 Tighten the screws (supplied) with a screwdriver to affix the stand to the panel, as illustrated on the right.

CAUTION!
Do not apply excessive force as this may damage the screw holes.

Wall-Mounting Instructions
Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task.

• We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own.
  
  NOTE: If you are wall-mounting the TV, this should be done by a qualified installer.
  

1. HDMI 2
2. HDMI 3
3. USB
4. Y/Pb/Pr
5. EARPHONE
6. COAXIAL
7. VGA
8. PC AUDIO INPUT
9. VIDEO
10. AUDIO LEFT & RIGHT
11. ANTENNA (RF)
12. HDMI 1 (ARC)

USB connection
Insert a USB storage device into the USB port to record, playback of video/music/photo

REMOTE CONTROL

• [POWER]
  Turns the TV on (standby) and off.

• [INPUT]
  Input mode conversion button.

• [AUDIO/NICAM]
  Change audio mode:left,right,mono,stereo.

• [ASPECT]
  Select different size.

• [PMODE]
  Select the different picture mode directly.

• [SMODE]
  Select the different sound mode directly.

• [NUMBER (0-9)]
  Press these button to enter digits These buttons for direct access to use a channel to enter channel number .f or both ATV and DTV or enter password for Parental lock .

• [-/–]
  Press to change the channel bit.

• [RECALL]
  Switch back and front between the current and previous channels.

• [FAV]
  Favourite program channel button.

• [FREEZE]
  To freeze current picture.

• [TV/RADIO]
  Press to switch between DTV and radio programs

• [ANGLE]
  Press to choose a differrent angle

• [LANGUAGE]
  Press to choose a differrent angle(DVD)

• [DVD SETUP]
  DVD menu setup.

• [DVD MENU ] Access the on-screen menu.

• [RED,GREEN,YELLOW,CYAN]
  Used to sel eel the corresponding coloured
  items on the screen during DTV mode.

• [SLEEP]
  Set the sleep timer.

• [EPG]
  Press to display EPG information(Electronic
  Program Guide).

• [   /ENTER]
  Allows you to navigate the on-screen menus and adjust the system settings to your preference.

• [MENU]
  Displays the OSD menu(on screen display).

• [EXIT]
  Press EXIT to exit menu of sub menu

• [DISPLAY]
  Press this button to display the information on current input

• [MUTE]
  Switches the sound on or off.

• [VOL+NOL-]
  Adjust the volume.

• [CH+/CH-]
  Change the channel.

• [ ] : Press this button to PLAY or PAUSE.

• [■] Stop the disc.

• Play fast backward/forward.{MEDIA/DVD)

• Play previous/next media file.(MEDIA/DVD)

• [HOLD]
  HOLD On or Off the current page display in Teletext mode

• [REVEAL]
  Reveal or Hide the hidden words.

• [SIZE ] Change the size of display in Teletext mode

• [INDEX]
  Press to return to the index/initial page.

• [S.PAGE]
  Display a sub-page of upper options.

• [TTX]
  Press to turn the Teletext On and Off.

• [A-B]
  set A-aired point B.(MEDIA/DVD)

• [T. SHIFT]
  Press the button to pause current DTV program and start record

• Eject in DVD Source.

• [AUTO]
  PC channel images automatic calibration· shortcuts.

• [REPEAT]
  Press to change the playing mode.

• [SUBTITLE]
  Select subtitle language(DVD)

• [REC]
  Press to record the program immediately.

• [LIST]
  Displays the record list.
  Note:
  Before turning off them main power or switching off the power supply, you must switch the TV by pressing the(Power) button on the TV set or on the remote control .
  Turn off the main power under standing mode.

Using the Remote Control

• Battery should normally last for about one year.
• Do not mix old and new batteries in the remote
• Do not use different types of battery
• If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
• Keep batteries away from children and pets.
• Never throw batteries into a fire.
• Do not drop, or impact the remote control as it void warranty immediately.
• The remote control operate at a range of 5 to 6M effectively
• Do not expose the remote control sensor to a bright light.

BASIC OPERATIONS

SELECTING AN INPUT SOURCE

• Press the INPUT button on the remote control, to display the input source list.
• Press the buttons to select the input source, and then press OK to confirm.
• You can access connected USB drives by selecting MEDIA.
  NOTE: The first time you use this TV, make sure to go through the first time installation and auto-search for all the DTV channels.
  

SELECTING OSD LANGUAGE

• Press button to highlight OSD Language.
• Press button to select the OSD Language you want to.

RECORDING

NOTE: Before you can record with this TV, make sure you have the USB you wish to use formatted as a FAT32 USB storage device. Then insert the device into your TV.

1. Insert your USB device into the USB Port
2. When watching Digital TV, Press the RECORD button on the remote control to start recording. Press record again to remove information bar.
3. Press RECORD again or the STOP button to display information about recording.
4. Select “POWER OFF” to stop recording and turn off the TV.
5. Press the EXIT button to cancel the dialog box and continue recording.

To Watch a Recorded Program:
Press the INDEX button on the remote control to see list of recorded programs
Use the buttons to find and select a recorded file.

Time-Shift Function
The time-shift function allows you to pause the Live TV signal, then resuming at your own convenience. (Make sure you have a formatted FAT32 USB storage device in your TV for time-shift function to work).

MEDIA

MEDIA PLAYBACK

• First insert a USB Device into the TV
• Press “MEDIA” on the remote control.
• Use the directional arrow keys to go through folders within your USB device to access Photo’s, Music, Movies or text.
• Press the EXIT button to return to previous page
  

CHANNEL SETTINGS
To access CHANNEL settings, press the MENU button and go to CHANNEL.

TUNING SETUP
To auto scan your TV to find your local channels, make sure the Antenna (RF) cable is connected to the TV. Then proceed to tune your TV by following the below.
Make sure to select your country “Australia”, then go to tune type and change the “TUNE TYPE” to only “DTV”.
Press OK to commence Auto Scanning.

PICTURE SETTINGS
To access Picture settings, press the MENU button and go to picture.

Picture Mode: You can select the type of picture which best corresponds to your viewing requirements. Contrast, Brightness, Colour, Tint and Sharpness can be adjusted when the picture mode is set to personal.
Contrast: Adjust the white level of the picture.
Brightness: Adjust darkness of black sections in the picture.
Colour: Adjust the color intensity of the picture.
Tint: Adjust the hue of the picture. (Only in the NTSC mode)
Sharpneu: Object edges are enhanced for picture detail.
Color Temperature: Select the color temperature that you feel comfortable.
Noise Reduction: Reduces the picture noise in a weak broadcast signal.

SOUND SETTINGS
To access Sound settings, press the MENU button and go to Sound.

Sound Mode: You can select a sound mode to suit your personal preferences.
Treble and Bass can be adjusted when the sound mode is set to personal.
Treble: Adjust the high frequency sounds.
Bass: Adjust the low frequency sounds.
Balance: Adjust the level of sound coming from the left and right speakers.
Auto Volume Level: Auto Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time when the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
SPDIF Mode: You can select the SPDIF Mode PCM/Auto or Off.
AD Switch: You can select the AD Switch On or Off. To increase the volume of the Audio description (AD). Amblyopia function for the blind, the tracks will be mixed describe the current screen . It need code stream to support.

LOCK MENU
To access LOCK settings, press the MENU button and go to Lock.
Default password is “0000”, then you can set your own password to lock the TV.

System Lock : The feature can prevent unauthorized operating the 1V set, unless entering 4-digit password.
The default password is 0000.
NOTE:
If you forget your password, please call the service center.
Set Password: Press the ENTER button to access the submenu.
You can set your private password. Press the number buttons on the remote control to set the new password. When the new password has been input twice, the setting is finished successfully.
Channel Lock (In AlV/DTV mode): Press the green button to lock the available channel you want. Press the green button again to unlock it. To watch a locked channel, enter your 4 digit password number when input screen displays.
Parental Guidance: Press the buttons to select Parental Guidance.
This feature can prevent children watching adult’s 1V programmes, according to the rating limit set.
Key Lock: Set to prevent it from being used by young children, or other unexpected using, When Key Lock’s statue is on, you can’t use the Key panel button

TIME SETTINGS
To access TIME settings, press the MENU button and go to TIME.

Clock: Display either the DTV signal stream time or set the system time.
Time Zone: Press buttons to select time zone.
Sleep Timer: Select the time to turn the TV to standby mode automatically.
Auto Standby: Select the time in hours (off, 3H, 4H, SH) that you want the TV to remain on after your last operation.
OSD Timer: Select the time in seconds (5s, 15s, 30s) that you want the On-Screen Menu remains display after your last operation.

NOTE:
• The Clock will change with the area which you have selected in the Time zone.

SETUP SETTINGS
To access Setup settings, press the MENU button and go to SETUP.

Language: Select your preferred On Screen Display language.
TT Language: Press the buttons to select the Teletext language.
Audio Languages: Press the buttons to select the Audio languages.
Subtitle Language: Press the buttons to select the Subtitle language.
Hearing Impaired: Press buttons to select Hearing Impaired, press the ◄/► buttons to select On/Off.
PVR FIie System: PVR file system.
Aspect Ratio: You can select the picture size which best corresponds to your viewing requirements.
Blue Screen: Set the background color to blue or black when having no input signal.
First Time installation: This is a guide to help you to setup the TV.
Reset: Recall the default setting.
Software Update (USB): Update the software using the USB memory device
Please be careful not to disconnect the power or remove the USB drive until updates are complete.
HDMI CEC: Press buttons to select HDMI CEC, press ENTER to enter sub- menu.

HDMICEC Press ◄ / ► button to tum the HDMI CEC On or Off.
HDMIARC Press ◄ / ► button to tum the HDMI ARC On or Off.
Auto Standby Press ◄ / ► button to tum the Auto Standby On or Off.
Device List Press ENTER button to open the main menu of device.

DVD

The DVD settings menu by the remote control the lower arrow, up and down buttons of the OSD menu. To change the OSD menu items, left and right buttons of the OSD menu. To select the OSD menu items.

TV SYSTEM
Choose a TV System, inclusive NTSC/PAL/AUTO.

TY TYPE
Some DVD discs have been authored in 4:3 aspect ratio format. To see the material in its original mode, you may need to change the Aspect ratio.

Pan &Scan (4:3)
Black edges left and right will be seen.

Letterbox (4:3)
Top and bottom of the screen may be black.

Wide 16:9 (Widescreen)
Full width picture but may have black areas top and bottom.

OSD Language
Select the OSD language (English is default).

Screen Saver
Start the screen saver, the screen saver image will appear when the player stops or the picture is frozon of a few minutes. This saver can keep the screen from being damaged.

• ON (start the screen saver)
• OFF (Remove the screen saver)

Audio
If a language listed below is recorded on the disc, you can play the sound in such language.
If not, the language recorded will be used.

Audio Language
Please select the preferred language for DVD audio.

1. The selected language is assigned high priority and can therefore be adopted automatically when the player begins playing a disc.
2. Languages vary between discs, depending on the DVD. You can also select alternative languages by pressing the AUDIO button on the remote.

Subtitle
Select the preferred language for subtitles recorded on Discs.

1. The selected subtitle language is assigned high priority and can therefore be adopted automatically when the player begins playing a discs.
2. Subtitles vary between discs, depending on the Discs. You can also select alternative subtitle language by pressing the SUBTITLE button on the remote.

Password
Change the password to your desired. The default password is 0000.

Default
Restore the DVD player’s system to factory default settings.

FAQs

GENERAL PROBLEMS WITH TV SET
If any issues persist, please contact us at help@eko- entertainment.com.au

works.

Unplug the power cord and plug it in after 60 seconds and restart the TV.

No picture| Please check antenna connection.

Station may be experiencing problems, please tune to another station.

Please adjust the settings of contrast and brightness.

Good picture but no sound| Please increase the volume.

Please check TV is under mute mode, press MUTE button on the remote control.

Please check sound settings

If external devices are being used, check their volumes are not set too low or turned off.

If using AVI or Component inputs, please make sure cables are connected properly and not loose.

If using DVI to HDMI cable, a separate audio cable is required. Make sure a headphone jack is not connected..

Good sound but abnormal color or no picture| Please check antenna connection and antenna condition. If using Component input, please check Component connections, incorrect or loose connections may cause color problems or cause the screen to be blank.
No response to remote control| Batteries of remote control may have exhausted, if necessary, please change the batteries.

Clean the remote control lens. The distance between LED TV and remote control should be within 8m, within recommended operating angle and path is free of obstructions.

Full screen flickering under VGA| V-HEIGHT value may be set too big, restart computer and enter safe mode, then set monitor parameters to correct value according to adjustment description.
Horizontal stripes under VGA| Sample phase may be deflected, adjust phase according to picture position.
Colored dots may be present on the screen| Although the LED screen is made with high-precision technology and 99.99% or more of the the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LED screen. This is a structural property of the LED screen and not a malfunction.
Picture is breaking up| Keep the TV away from noisy electrical sources such as cars, hair dryers, welders, and all optional equipment.

Electrical atmospheric interference such as local or distant lightning storms may cause picture to break up.

When installing optional equipment, leave some space between the optional equipment and the TV.

Check the antenna and connection.

Keep the antenna away from any power or input/output cables.

SPECIFICATIONS

avi/mpg/mov/mkv/dat/mp4/vob/rm/rmvb
Music: mp3/wma
Photo: jpg/jpeg/bmp/png
Supported Discs| DVD, CD
Power Source| 110-240V – 50/60Hz
Power Consumption| 75W
USB| 5V = max. 500mA
Dimensions| With stand: 911.0 (w) x 206.8 (d) x 571.2 (h) mm
Without stand: 911.0 (w) x 87.1 (d) x 521.8 (h) mm
Weight| Net: 6.06 kg
Gross: 7.98 kg

REGION CODE SETTING
All DVD discs are coded by the sales territory. Please note the built-in DVD player is set to Region 0 coding by the factory, which cannot be changed. This is in compliance with DVD patent requirements.

CUSTOMER SUPPORT:

help@eko-entertainment.com.au
DISTRIBUTED BY:
Ayonz Pty Ltd

References

• Entertainment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>