basalte Eve Frame for iPad Air 11 Inch Installation Guide
- June 6, 2024
- basalte
Table of Contents
Installation Guide
-
Identification of the parts
a Eve Air 11” frame for iPad Pro 11” & iPad Air (4th generation) (product number: 0676-xx)
b Custom angled USB-C to USB-A cable Max power 5V 2A /No data transfer
c Suction cup -
Positioning of the wall box (not included)
A wall box should be foreseen to install the iPad power supply. The Puck (not included) is a USB power supply that fits into a 1-gang wall box and uses the USB-C cable,
supplied with the iPad.
The wall box should be installed according to the dimensions on the drawing (2). -
Puck power supply (not included – product number: 610-02)
Install the Puck in the wall box following the instructions of the Puck manual. Connect the USB-C cable, supplied with the Eve frame to the Puck.
The maximum output power of the puck is 10W. Do not set the iPad’s screen to permanently on, but enable auto-lock in the iPad’s settings to allow your device to charge.
Made in Belgium
Basalte is a registered trademark of Basalte bvba. Eve is a registered trademark of Basalte bvba. Eve mini, Eve 9.7″, Eve Pro 9.7″ -11″ & -12.9″, Eve Air 11” and Eve touch are registered designs of Basalte bvba. iPad mini, iPad Air, iPad, iPad Pro, and iPod touch are registered trademarks of Apple Inc. -
Installing the frame
Please use the correct openings of the Eve frame and ensure the screws are positioned so that they cannot damage the iPad. -
Mounting the iPad Air / iPad Pro
1. Plug the power connector into the iPad.
Make sure the USB-C cable is connected in the proper orientation. Inserting the cable in the wrong direction can damage the iPad once you mount it in the Eve frame.
2. Place the iPad in the opening of the frame so that it is being held by magnets.
Make sure that the power cable is not squeezed between the iPad and the frame.
Basalte bv
Hundelgemsesteenweg 1a 9820 Merelbeke Belgium -
Removing the iPad Air / iPad Pro
1. Place the suction cup on the iPad screen and push lightly to create suction.
2. Gently pull the iPad making sure it cannot fall.
3. Disconnect the power connector.
Dimensions Eve Air 11”
Frame: 259,60mm/10.22″ x 182,5mm/7.19” x 10mm/0.39”
Eve Air 11” is compatible with:
iPad Pro 11” 2018 & 2020 model, iPad Air 2020 model (4th generation)
Made in Belgium
Basalte is a registered trademark of Basalte bvba.
Eve is a registered trademark of Basalte bvba.
Eve mini, Eve 9.7″, Eve Pro 9.7″ -11″ & -12.9″, Eve Air 11” and Eve touch are
registered designs of Basalte bvba.
iPad mini, iPad Air, iPad, iPad Pro and iPod touch are
registered trademarks of Apple Inc.
Basalte bv
Hundelgemsesteenweg 1a 9820 Merelbeke Belgium
tel +32 9 385 78 38
info@basalte.be
www.basalte.be
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>