AKUVOX S567 10 Inch Indoor Monitor User Guide
- June 9, 2024
- Akuvox
Table of Contents
AKUVOX S567 10 Inch Indoor Monitor
Unpacking
Before you begin using the device, please check the version you got and ensure
that the following items are included in the shipped box:
Product Overview
Installation
Step 1: Bracket Installation
With 86/118 junction box in the wall
With round junction box in the wall
- Stick two foams onto the wall-mounting bracket as shown in the pictures if the edge of round junction box line up with wall. It is no need to stick the foam if the edge of round junction box is lower than wall.
- Fix the wall-mounting bracket on the round embedded box with two ST3xl5 cross head screws, please ensure the bracket against to wall.
Step2: Device Mounting
- Plug the cables from the wall into corres pondin g interface on the back cover to testthe de vice whether works prop erly.
- Tiltthe de vice lS’and align the grooves on the back cover with the hooks on the bracket.
- Use Allen wrench fix two M2x5 hex socket screws into the bottom of the device. And the installation is done.
- The n press down the de vice and mak e it againstthe wall.
Device Removal
Use Allen wrench to unscrew the two M2x5 hex socket screws on the bottom of the device, then tilt the device 15° as shown in the picture and push up it to remove the device.
Device Wiring
Application Network Topology
Configuration
- Access Basic Information: After setting up network and power, enter Setting> System Info to check Account, Network, Version status.
- Access the Website: Launch a browser and type in the IP address then enter the username and password to login (username/password: ad min /ad min by default).
- Account Registration: On web UI, go to the path: Account> Basic page to fill in the account information,click Submit to confirm (please refer to user manual for more information).
Operation
- Make a call: Enter the callee’s number or room address, then press Dial icon to make a audio call or press Video icon to make a video call. Press icon to hang up.
- Receive a call: Press icon to pick up the incoming call in video or press icon to pick up the call in audio mode.
- Unlock: During the talk, you can press Unlock icon on the talking interface to unlock the door.
- Monitor: Press Monitor icon to receive the video from the door phone or from third-party devices.
Notice Information
Akuvox S567 firmware contains third-party open source software under the terms
of the GNU General Public License{GPL). Akuvox is committed to meeting the
requirements of the GNU General Public License {GPL) and will make all
required source code available.
The source code of software under the terms of GNU GPL can be downloaded on
line, http://www.akuvox.com/gpl.
Information contained in this document is believed to be accurate and reliable
at the time of printing. This document is subject to change without notice,
any update to this document can be viewed on Akuvox’ s website:
http://www.akuvox.com © Copyright 2022 Akuvox Ltd. All rights reserved.
QR SCAN
AKUVOX (XIAMEN) NETWORKS CO., LTD.
Add.: 10/F, NO.56 GUAN RI ROAD, SOFTWARE PARK II, XIAMEN 361009, CHINA
www.akuvox.com