StarTech com 5G4AINDNP-USB-A-HUB 4-Port Industrial USB Hub User Guide

4-Port Industrial USB Hub – 15kV/8kV Air/Contact ESD Protection – Mountable
Quick-Start Guide

5G4AINDNP-USB-A-HUB 4-Port Industrial USB Hub

Product ID
5G4AINDNP-USB-A-HUB
Product Diagram

Package Contents

• USB Hub x 1
• 6 ft [1.8 m] USB-A to USB-B Cable x 1
• Terminal Block Connector (Attached)
• DIN Rail Mounting Brackets (with Mounting Screws) x 2
• Quick-Start Guide x 1

Requirements

• Computer
• USB-A Port
• 5-24V DC Power Source

For the latest drivers, manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/5G4AINDNP-USB-A-HUB

• USB 3.2 Gen 1 (5 Gbps)
2| DC 2-Wire Terminal Block Power Input| • Connect a +5~24 V DC Power Source
• 30W or higher recommended for maximum power performance
3| DC Power Input| • Connect a +5~24 V DC Power Source
• 30W or higher recommended for maximum power performance
4| 4x USB Data/Charge Ports & Port
Connectivity LEDs
(Screw Locking, USB-A)| • Connect USB Peripherals
• USB 3.2 Gen 1 (5 Gbps)
• BC 1.2 for up to 5 V/1.5 A (7.5 W) Charging
• LED illuminates green when a device is actively connected to the host computer
5| Mounting Brackets| • Wall mount the USB Hub
• Mount the USB Hub to the side/underside of a Desk

Installation

Notes:

• Connect the Power Source after all the other installation steps have been completed.
• There are two ways to power the USB Hub.
  Using an external DC Power Adapter or a Terminal Block Power Source.
  Voltage (+5 – 24 V DC).

Connect the USB Ports

1. Connect up to four USB peripherals to the Screw Locking USB Data/Charge Ports, located on the USB Hub.
2. Use the USB-A to USB-B Cables, to connect a USB port on each Computer to the USB Host Port, located on the USB Hub.
   • The Computer will automatically detect the device and install the required drivers for the USB Hub.

Power the Hub
Power the Hub Using the 2-Wire Terminal Block

1. Remove the Terminal Block Connector Housing from the USB Hub’s Casing.

2. Loosen the screws for the Terminals located on the Terminal Block Connector, using a Flat Head Screwdriver.

3. Connect the Positive and Negative Wires from the 5-24V DC Power Source (not included) to the Terminals on the Terminal Block Connector.
   Note: Ensure the polarity of the power input is correctly matched with the DC 2-Wire Terminal Block Pins to function properly and to prevent damage to the USB Hub and any connected peripherals.

4. Insert the Terminal Block Connector Housing back into USB Hub.
   Power the Hub Using an External Power Adapter
   • Connect a Power Adapter (not included) to the Power Input Port, located on the front of the USB Hub and to an AC Electrical Outlet.

DIN Rail Mounting
This USB Hub includes DIN Rail Brackets that can be used to horizontally mount the USB Hub to a DIN Rail. To install the DIN Rail Brackets on the USB Hub:

1. Align the Din Rail Brackets (x 2) with the DIN Rail Mounting Holes, located on either side at the back of the USB Hub.
2. Insert the Mounting Screws (x 4) through the DIN Rail Brackets, and into the USB Hub.
3. Using a Phillips Head Screwdriver tighten the Mounting Screws. Be careful not to over-tighten the Mounting Screws.

Regulatory Compliance
FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information
This product is backed by a 2-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands| FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
---|---|---|---|---

Documents / Resources

| StarTech com 5G4AINDNP-USB-A-HUB 4-Port Industrial USB Hub [pdf] User Guide
5G4AINDNP-USB-A-HUB 4-Port Industrial USB Hub, 5G4AINDNP-USB-A-HUB, 4-Port Industrial USB Hub, Industrial USB Hub, USB Hub, Hub
---|---
| StarTech Com 5G4AINDNP-USB-A-HUB 4-Port Industrial USB Hub [pdf] User Guide
5G4AINDNP-USB-A-HUB 4-Port Industrial USB Hub, 5G4AINDNP-USB-A-HUB, 4-Port Industrial USB Hub, Industrial USB Hub, USB Hub, Hub

References

• 4-Port Industrial USB 3.0 Hub, Metal - Industrial USB Hubs | StarTech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>