CHERRY MC 3000 Corded Optical Mouse User Manual

: June 9, 2024
: CHERRY

Table of Contents

CHERRY MC 3000 Corded Optical Mouse
For your safety
Connecting the mouse
Set the sensitivity of the mouse (DPI rate)
The surface under the mouse
Cleaning the mouse
Device disposal
Technical data
Certifications
- FCC STATEMENT
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CHERRY MC 3000 Corded Optical Mouse

Before you begin

Every device is different!
The operating instructions contain information on effective and reliable use.

Read the operating instructions carefully.
Keep the operating instructions and pass them on to other users.

The CHERRY MC 3000 is a mouse for operating PCs and laptops. For information on other products, downloads and much more, visit us at www.cherry.de.

For your safety

RSI stands for “Repetitive Strain Injury”.
RSI arises due to small movements continuously repeated over a long period of time.

Set up your workspace ergonomically.
Position the keyboard and mouse in such a manner that your upper arms and wrists are outstretched and to the sides of your body.
Take several short breaks, with stretching exercises if necessary.
Change your posture often.

Connecting the mouse

Insert the USB plug into any USB socket of your PC/laptop.

Set the sensitivity of the mouse (DPI rate)

For precise work, you can change the resolution of the mouse sensor. The speed of the mouse pointer increases with the level of the DPI rate.

Press the DPI button on the top of the mouse.

The DPI rate changes between 500 and 1000 dpi. 1000 dpi is set each time the PC/laptop is restarted.

The surface under the mouse

The mouse is most effective on a light-colored, textured surface, which saves energy and ensures optimal motion detection. A reflective surface is not suitable for using the mouse on.

Cleaning the mouse

Switch off the PC/laptop or pull out the USB mouse plug.
NOTICE: Damage due to aggressive cleaning agents or liquid in the mouse
- Do not use solvents such as benzene, alcohol, scouring agents or abrasive scourers for cleaning the mouse.
- Prevent any liquid from getting inside the mouse.
Clean the mouse with a slightly damp cloth and some mild detergent (such as washing-up liquid).
Dry the mouse with a soft, lint-free cloth.

Device disposal

Do not dispose of devices with this symbol in household waste.
Dispose of the devices in accordance with statutory regulations – at your local dealer or at municipal recycling centers.

Technical data

Designation/Value

Supply voltage 5.0 V/DC ±5%
Current consumption Typ. 100 mA
Storage temperature -15 °C … +60 °C
Operating temperature 0 °C … +40 °C

Certifications

FCC STATEMENT

Federal Communications Commission (FCC) Radio Frequency Interference Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

UKCA

UK Authorised Representative:

Authorized Representative Service
The Old Methodist Chapel Great Hucklow SK17 8RG UK.