ACEFAST N1 Neck Hanging Bluetooth Earphones User Guide
- June 16, 2024
- ACEFAST
Table of Contents
N1
Quick Start Guide
Neck hanging Bluetooth earphones
Product information
- Volume ＋ (Click once: Volume ＋/Long press: Next track)
- Volume － (Click once: Volume －/Long press: Previous track)
- LED indicator
- Power button (Click once: Music play/pause , Answer/End call /Long press: On/off, Decline the call)
- Charging port (USB-C charging port input DC5V 1A)
Operation method
- Long press to power on, and the Bluetooth status indicator light will blink in red and blue after powering on.
- Open the Bluetooth on your phone, search for “ACEFAST N1”, and click on it to connect. Once the connection is successful, there will be a prompt sound and the blue light will blink once every 5 seconds.
Long press to power on/off|
---|---
Short press to play/pause music|
Short press to answer/end a call|
Long press to decline a call|
Short press to increase/decrease volume|
Long press to skip to the next/previous track|
Product Specifications
| Bluetooth version: V5.3 | Standby time: ≥600 hours |
|---|---|
| Transmission distance: 10m | Product size: |
| Frequency response: 40Hz˜20000Hz | 440x140x18mm/17.32×5.51×0.71in |
| Input: DC5V 1A | Product weight: 74g / 2.61oz |
| Charging time: About 2 hours | Warranty: 18 months |
| Battery capacity: 2x450mAh | Working frequency range: 2402-2480MHz |
| Music time: About 150 hours | RF output power ≤10dBm |
Precautions
-
Do not place the headset in a place that is humid, full of dust, oily smoke or steam, or exposed to direct sunlight. Do not leave the headset in the car for a long time. Otherwise, it may cause a malfunction.
-
Using this headset to listen at high volume may affect your hearing. For traffic safety, please do not use this headset while driving or cycling.
-
Do not use headset in places where the inability to hear environmental sounds will cause danger, such as railway crossings, railway station platforms, pedestrian crossings, and construction sites.
-
Do not place heavy objects or apply pressure on the headset, otherwise it may cause deformation of the headset during long-term storage.
-
The static electricity accumulated in the body may cause slight irritation in the ears. Wearing clothes made of natural materials can minimize the impact.
-
Do not subject the headset to excessive impact.
-
Please use a soft dry cloth to clean the headset.
-
Do not expose the headset to water. The headset is not waterproof. Remember to observe the following precautions.
– Be careful not to let the headset fall into the sink or other containers filled with water.
– Do not use the headset in humid places or bad weather, such as rain or snow.
– Do not get the headset wet. If you touch the headset with wet hands, or put the headset in damp clothing, the headset will get wet and this may cause the headset to malfunction. -
Because the product is magnetic, keep it away from electronic products such as bank cards, mobile phones, computer monitors, TVs, etc.
-
If you feel unwell after using the Bluetooth device, stop using it immediately. If the problem persists, please contact your local dealer.
-
If you have any questions or problems about this headset that are not covered in this manual, please contact your local dealer.
To prevent potential hearing damage, please do not use high volume for an extended period of time.
FCC
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the mail below that corresponds with your region. Please include your Amazon order number and product mode number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon UK orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
Other region orders: [email protected]
*Please note, ACEFAST can provide after sales service for products purchased from any official ACEFAST store. If you have purchased from local seller, you can also contact them directly for service or warranty issues.
Shenzhen Houshuxia Technology Co., LTD
www.acefast.com |
[email protected]
Rm203, 2nd Floor, Building C, Youth Pioneer Park,
Jianshe East Road, Tsinghua Community,
Longhua Street, Longhua District, Shenzhen, P. R. China
Shenzhen, 518000, China